@@ -123,7 +123,6 @@ msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
dp/dp_ctrl.o \
dp/dp_display.o \
dp/dp_drm.o \
- dp/dp_hpd.o \
dp/dp_link.o \
dp/dp_panel.o \
dp/dp_parser.o \
@@ -14,7 +14,6 @@
#include "dp_catalog.h"
struct dp_ctrl {
- bool orientation;
atomic_t aborted;
u32 pixel_rate;
bool wide_bus_en;
@@ -21,7 +21,6 @@
struct dp_debug_private {
struct dentry *root;
- struct dp_usbpd *usbpd;
struct dp_link *link;
struct dp_panel *panel;
struct drm_connector *connector;
@@ -232,14 +231,14 @@ static void dp_debug_init(struct dp_debug *dp_debug, struct drm_minor *minor)
}
struct dp_debug *dp_debug_get(struct device *dev, struct dp_panel *panel,
- struct dp_usbpd *usbpd, struct dp_link *link,
+ struct dp_link *link,
struct drm_connector *connector, struct drm_minor *minor)
{
struct dp_debug_private *debug;
struct dp_debug *dp_debug;
int rc;
- if (!dev || !panel || !usbpd || !link) {
+ if (!dev || !panel || !link) {
DRM_ERROR("invalid input\n");
rc = -EINVAL;
goto error;
@@ -252,7 +251,6 @@ struct dp_debug *dp_debug_get(struct device *dev, struct dp_panel *panel,
}
debug->dp_debug.debug_en = false;
- debug->usbpd = usbpd;
debug->link = link;
debug->panel = panel;
debug->dev = dev;
@@ -42,7 +42,7 @@ struct dp_debug {
* for debugfs input to be communicated with existing modules
*/
struct dp_debug *dp_debug_get(struct device *dev, struct dp_panel *panel,
- struct dp_usbpd *usbpd, struct dp_link *link,
+ struct dp_link *link,
struct drm_connector *connector,
struct drm_minor *minor);
@@ -59,7 +59,7 @@ void dp_debug_put(struct dp_debug *dp_debug);
static inline
struct dp_debug *dp_debug_get(struct device *dev, struct dp_panel *panel,
- struct dp_usbpd *usbpd, struct dp_link *link,
+ struct dp_link *link,
struct drm_connector *connector, struct drm_minor *minor)
{
return ERR_PTR(-EINVAL);
@@ -14,7 +14,6 @@
#include "msm_drv.h"
#include "msm_kms.h"
-#include "dp_hpd.h"
#include "dp_parser.h"
#include "dp_power.h"
#include "dp_catalog.h"
@@ -88,7 +87,6 @@ struct dp_display_private {
struct platform_device *pdev;
struct dentry *root;
- struct dp_usbpd *usbpd;
struct dp_parser *parser;
struct dp_power *power;
struct dp_catalog *catalog;
@@ -98,7 +96,6 @@ struct dp_display_private {
struct dp_ctrl *ctrl;
struct dp_debug *debug;
- struct dp_usbpd_cb usbpd_cb;
struct dp_display_mode dp_mode;
struct msm_dp dp_display;
@@ -442,7 +439,7 @@ static void dp_display_host_init(struct dp_display_private *dp)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized);
- dp_power_init(dp->power, false);
+ dp_power_init(dp->power);
dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
dp_aux_init(dp->aux);
dp->core_initialized = true;
@@ -460,16 +457,14 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
dp->core_initialized = false;
}
-static int dp_display_usbpd_configure_cb(struct device *dev)
+static int dp_display_usbpd_configure(struct dp_display_private *dp)
{
- struct dp_display_private *dp = dev_get_dp_display_private(dev);
-
dp_display_host_phy_init(dp);
return dp_display_process_hpd_high(dp);
}
-static int dp_display_usbpd_disconnect_cb(struct device *dev)
+static int dp_display_usbpd_disconnect(struct dp_display_private *dp)
{
return 0;
}
@@ -535,11 +530,10 @@ static int dp_display_handle_irq_hpd(struct dp_display_private *dp)
return 0;
}
-static int dp_display_usbpd_attention_cb(struct device *dev)
+static int dp_display_usbpd_attention(struct dp_display_private *dp)
{
int rc = 0;
u32 sink_request;
- struct dp_display_private *dp = dev_get_dp_display_private(dev);
/* check for any test request issued by sink */
rc = dp_link_process_request(dp->link);
@@ -558,13 +552,9 @@ static int dp_display_usbpd_attention_cb(struct device *dev)
static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
{
- struct dp_usbpd *hpd = dp->usbpd;
u32 state;
int ret;
- if (!hpd)
- return 0;
-
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
@@ -588,7 +578,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
return 0;
}
- ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
+ ret = dp_display_usbpd_configure(dp);
if (ret) { /* link train failed */
dp->hpd_state = ST_DISCONNECTED;
} else {
@@ -626,12 +616,8 @@ static void dp_display_handle_plugged_change(struct msm_dp *dp_display,
static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
{
- struct dp_usbpd *hpd = dp->usbpd;
u32 state;
- if (!hpd)
- return 0;
-
mutex_lock(&dp->event_mutex);
state = dp->hpd_state;
@@ -719,7 +705,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
return 0;
}
- dp_display_usbpd_attention_cb(&dp->pdev->dev);
+ dp_display_usbpd_attention(dp);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
dp->dp_display.connector_type, state);
@@ -741,24 +727,10 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
{
int rc = 0;
struct device *dev = &dp->pdev->dev;
- struct dp_usbpd_cb *cb = &dp->usbpd_cb;
struct dp_panel_in panel_in = {
.dev = dev,
};
- /* Callback APIs used for cable status change event */
- cb->configure = dp_display_usbpd_configure_cb;
- cb->disconnect = dp_display_usbpd_disconnect_cb;
- cb->attention = dp_display_usbpd_attention_cb;
-
- dp->usbpd = dp_hpd_get(dev, cb);
- if (IS_ERR(dp->usbpd)) {
- rc = PTR_ERR(dp->usbpd);
- DRM_ERROR("failed to initialize hpd, rc = %d\n", rc);
- dp->usbpd = NULL;
- goto error;
- }
-
dp->parser = dp_parser_get(dp->pdev);
if (IS_ERR(dp->parser)) {
rc = PTR_ERR(dp->parser);
@@ -1527,7 +1499,7 @@ void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
dp = container_of(dp_display, struct dp_display_private, dp_display);
dev = &dp->pdev->dev;
- dp->debug = dp_debug_get(dev, dp->panel, dp->usbpd,
+ dp->debug = dp_debug_get(dev, dp->panel,
dp->link, dp->dp_display.connector,
minor);
if (IS_ERR(dp->debug)) {
deleted file mode 100644
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
- */
-
-#define pr_fmt(fmt) "[drm-dp] %s: " fmt, __func__
-
-#include <linux/slab.h>
-#include <linux/device.h>
-
-#include "dp_hpd.h"
-
-/* DP specific VDM commands */
-#define DP_USBPD_VDM_STATUS 0x10
-#define DP_USBPD_VDM_CONFIGURE 0x11
-
-/* USBPD-TypeC specific Macros */
-#define VDM_VERSION 0x0
-#define USB_C_DP_SID 0xFF01
-
-struct dp_hpd_private {
- struct device *dev;
- struct dp_usbpd_cb *dp_cb;
- struct dp_usbpd dp_usbpd;
-};
-
-int dp_hpd_connect(struct dp_usbpd *dp_usbpd, bool hpd)
-{
- int rc = 0;
- struct dp_hpd_private *hpd_priv;
-
- hpd_priv = container_of(dp_usbpd, struct dp_hpd_private,
- dp_usbpd);
-
- if (!hpd_priv->dp_cb || !hpd_priv->dp_cb->configure
- || !hpd_priv->dp_cb->disconnect) {
- pr_err("hpd dp_cb not initialized\n");
- return -EINVAL;
- }
- if (hpd)
- hpd_priv->dp_cb->configure(hpd_priv->dev);
- else
- hpd_priv->dp_cb->disconnect(hpd_priv->dev);
-
- return rc;
-}
-
-struct dp_usbpd *dp_hpd_get(struct device *dev, struct dp_usbpd_cb *cb)
-{
- struct dp_hpd_private *dp_hpd;
-
- if (!cb) {
- pr_err("invalid cb data\n");
- return ERR_PTR(-EINVAL);
- }
-
- dp_hpd = devm_kzalloc(dev, sizeof(*dp_hpd), GFP_KERNEL);
- if (!dp_hpd)
- return ERR_PTR(-ENOMEM);
-
- dp_hpd->dev = dev;
- dp_hpd->dp_cb = cb;
-
- dp_hpd->dp_usbpd.connect = dp_hpd_connect;
-
- return &dp_hpd->dp_usbpd;
-}
deleted file mode 100644
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DP_HPD_H_
-#define _DP_HPD_H_
-
-//#include <linux/usb/usbpd.h>
-
-#include <linux/types.h>
-#include <linux/device.h>
-
-enum plug_orientation {
- ORIENTATION_NONE,
- ORIENTATION_CC1,
- ORIENTATION_CC2,
-};
-
-/**
- * struct dp_usbpd - DisplayPort status
- *
- * @orientation: plug orientation configuration
- * @low_pow_st: low power state
- * @adaptor_dp_en: adaptor functionality enabled
- * @multi_func: multi-function preferred
- * @usb_config_req: request to switch to usb
- * @exit_dp_mode: request exit from displayport mode
- * @hpd_irq: Change in the status since last message
- * @alt_mode_cfg_done: bool to specify alt mode status
- * @debug_en: bool to specify debug mode
- * @connect: simulate disconnect or connect for debug mode
- */
-struct dp_usbpd {
- enum plug_orientation orientation;
- bool low_pow_st;
- bool adaptor_dp_en;
- bool multi_func;
- bool usb_config_req;
- bool exit_dp_mode;
- bool hpd_irq;
- bool alt_mode_cfg_done;
- bool debug_en;
-
- int (*connect)(struct dp_usbpd *dp_usbpd, bool hpd);
-};
-
-/**
- * struct dp_usbpd_cb - callback functions provided by the client
- *
- * @configure: called by usbpd module when PD communication has
- * been completed and the usb peripheral has been configured on
- * dp mode.
- * @disconnect: notify the cable disconnect issued by usb.
- * @attention: notify any attention message issued by usb.
- */
-struct dp_usbpd_cb {
- int (*configure)(struct device *dev);
- int (*disconnect)(struct device *dev);
- int (*attention)(struct device *dev);
-};
-
-/**
- * dp_hpd_get() - setup hpd module
- *
- * @dev: device instance of the caller
- * @cb: struct containing callback function pointers.
- *
- * This function allows the client to initialize the usbpd
- * module. The module will communicate with HPD module.
- */
-struct dp_usbpd *dp_hpd_get(struct device *dev, struct dp_usbpd_cb *cb);
-
-int dp_hpd_register(struct dp_usbpd *dp_usbpd);
-void dp_hpd_unregister(struct dp_usbpd *dp_usbpd);
-int dp_hpd_connect(struct dp_usbpd *dp_usbpd, bool hpd);
-
-#endif /* _DP_HPD_H_ */
@@ -10,7 +10,6 @@
#include "dp_aux.h"
#include "dp_link.h"
-#include "dp_hpd.h"
struct edid;
@@ -352,7 +352,7 @@ void dp_power_client_deinit(struct dp_power *dp_power)
}
-int dp_power_init(struct dp_power *dp_power, bool flip)
+int dp_power_init(struct dp_power *dp_power)
{
int rc = 0;
struct dp_power_private *power = NULL;
@@ -26,13 +26,12 @@ struct dp_power {
* dp_power_init() - enable power supplies for display controller
*
* @power: instance of power module
- * @flip: bool for flipping gpio direction
* return: 0 if success or error if failure.
*
* This API will turn on the regulators and configures gpio's
* aux/hpd.
*/
-int dp_power_init(struct dp_power *power, bool flip);
+int dp_power_init(struct dp_power *power);
/**
* dp_power_deinit() - turn off regulators and gpios.
Remove most of remains of downstream usbpd code. Mainline kernel uses different approach for managing Type-C / USB-PD, so this remains unused. Do not touch usbpd callbacks for now, since they look usefull enough as an example of how to handle connect/disconnect (to be rewritten into . Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/Makefile | 1 - drivers/gpu/drm/msm/dp/dp_ctrl.h | 1 - drivers/gpu/drm/msm/dp/dp_debug.c | 6 +-- drivers/gpu/drm/msm/dp/dp_debug.h | 4 +- drivers/gpu/drm/msm/dp/dp_display.c | 42 +++------------- drivers/gpu/drm/msm/dp/dp_hpd.c | 67 ------------------------- drivers/gpu/drm/msm/dp/dp_hpd.h | 78 ----------------------------- drivers/gpu/drm/msm/dp/dp_panel.h | 1 - drivers/gpu/drm/msm/dp/dp_power.c | 2 +- drivers/gpu/drm/msm/dp/dp_power.h | 3 +- 10 files changed, 13 insertions(+), 192 deletions(-) delete mode 100644 drivers/gpu/drm/msm/dp/dp_hpd.c delete mode 100644 drivers/gpu/drm/msm/dp/dp_hpd.h