[14/14] arm64: dts: qcom: msm8998-mtp: Merge and fix up the DT

Message ID	20220430162353.607709-14-konrad.dybcio@somainline.org
State	Accepted
Commit	3ae6156e2f414f0ba2bf860e4173bbd366d5e101
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Konrad Dybcio <konrad.dybcio@somainline.org> To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio <konrad.dybcio@somainline.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 14/14] arm64: dts: qcom: msm8998-mtp: Merge and fix up the DT Date: Sat, 30 Apr 2022 18:23:52 +0200 Message-Id: <20220430162353.607709-14-konrad.dybcio@somainline.org> In-Reply-To: <20220430162353.607709-1-konrad.dybcio@somainline.org> References: <20220430162353.607709-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[01/14] arm64: dts: qcom: msm8998: Fix TLMM and pin nodes \| expand [01/14] arm64: dts: qcom: msm8998: Fix TLMM and pin nodes [02/14] arm64: dts: qcom: msm8998-clamshell: Clean up the DT [03/14] arm64: dts: qcom: msm8998-laptops: Clean up DTs [04/14] arm64: dts: qcom: msm8998-yoshino-lilac: Disable LVS1 [05/14] arm64: dts: qcom: msm8998-yoshino: Add USB extcon [06/14] arm64: dts: qcom: msm8998-yoshino: Remove simple-bus compatible from clocks{} [07/14] arm64: dts: qcom: msm8998-yoshino/oneplus: Use pm8005_regulators label [08/14] arm64: dts: qcom: msm8998-oneplus: Apply style fixes [09/14] arm64: dts: qcom: msm8998-fxtec: Use "okay" instead of "ok" [10/14] arm64: dts: qcom: msm8998: Keep MMCC & MMSS_SMMU enabled by default [11/14] arm64: dts: qcom: msm8998-oneplus: Add clocks & GDSC to simplefb [12/14] arm64: dts: qcom: msm8998: Clean up #includes [13/14] arm64: dts: qcom: msm8998-fxtec: Decouple from 8998 MTP [14/14] arm64: dts: qcom: msm8998-mtp: Merge and fix up the DT

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index 66540d2ca13b..a9bdf06a6e5b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -3,11 +3,450 @@ /dts-v1/; -#include "msm8998-mtp.dtsi" +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; compatible = "qcom,msm8998-mtp"; qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi deleted file mode 100644 index 9d505a2a2652..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ - -#include "msm8998.dtsi" -#include "pm8005.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp1_uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&blsp1_uart3 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&blsp2_uart1 { - status = "okay"; -}; - -&etf { - status = "okay"; -}; - -&etm1 { - status = "okay"; -}; - -&etm2 { - status = "okay"; -}; - -&etm3 { - status = "okay"; -}; - -&etm4 { - status = "okay"; -}; - -&etm5 { - status = "okay"; -}; - -&etm6 { - status = "okay"; -}; - -&etm7 { - status = "okay"; -}; - -&etm8 { - status = "okay"; -}; - -&etr { - status = "okay"; -}; - -&funnel1 { - status = "okay"; -}; - -&funnel2 { - status = "okay"; -}; - -&funnel3 { - status = "okay"; -}; - -&funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; - }; -}; - -&qusb2phy { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&replicator1 { - status = "okay"; -}; - -&rpm_requests { - pm8998-regulators { - compatible = "qcom,rpm-pm8998-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_s13-supply = <&vph_pwr>; - vdd_l1_l27-supply = <&vreg_s7a_1p025>; - vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; - vdd_l3_l11-supply = <&vreg_s7a_1p025>; - vdd_l4_l5-supply = <&vreg_s7a_1p025>; - vdd_l6-supply = <&vreg_s5a_2p04>; - vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; - vdd_l9-supply = <&vreg_bob>; - vdd_l10_l23_l25-supply = <&vreg_bob>; - vdd_l13_l19_l21-supply = <&vreg_bob>; - vdd_l16_l28-supply = <&vreg_bob>; - vdd_l18_l22-supply = <&vreg_bob>; - vdd_l20_l24-supply = <&vreg_bob>; - vdd_l26-supply = <&vreg_s3a_1p35>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: s3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - vreg_s4a_1p8: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - }; - vreg_s5a_2p04: s5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - vreg_s7a_1p025: s7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - vreg_l1a_0p875: l1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - }; - vreg_l2a_1p2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l3a_1p0: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l5a_0p8: l5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - vreg_l6a_1p8: l6 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <1808000>; - }; - vreg_l7a_1p8: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l8a_1p2: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l9a_1p8: l9 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l10a_1p8: l10 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l11a_1p0: l11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l12a_1p8: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l14a_1p88: l14 { - regulator-min-microvolt = <1880000>; - regulator-max-microvolt = <1880000>; - }; - vreg_l15a_1p8: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l17a_1p3: l17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - }; - vreg_l18a_2p7: l18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l19a_3p0: l19 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - vreg_l20a_2p95: l20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - regulator-system-load = <800000>; - }; - vreg_l22a_2p85: l22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <2864000>; - }; - vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l24a_3p075: l24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - }; - vreg_l25a_3p3: l25 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l26a_1p2: l26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l28_3p0: l28 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - }; - - pmi8998-regulators { - compatible = "qcom,rpm-pmi8998-regulators"; - - vdd_bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - }; - }; -}; - -&remoteproc_adsp { - status = "okay"; -}; - -&remoteproc_mss { - status = "okay"; -}; - -&remoteproc_slpi { - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; -}; - -&sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on &sdc2_cd>; - pinctrl-1 = <&sdc2_off &sdc2_cd>; -}; - -&stm { - status = "okay"; -}; - -&ufshc { - status = "okay"; - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l26a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vcc-max-microamp = <750000>; - vccq-max-microamp = <560000>; - vccq2-max-microamp = <750000>; -}; - -&ufsphy { - status = "okay"; - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - dr_mode = "host"; /* Force to host until we have Type-C hooked up */ -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -};

[14/14] arm64: dts: qcom: msm8998-mtp: Merge and fix up the DT

Commit Message

Patch