| Message ID | 20220429135108.2781579-54-schnelle@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Fri, Apr 29, 2022 at 03:50:51PM +0200, Niklas Schnelle wrote: > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends > not being declared. We thus need to add HAS_IOPORT as dependency for > those drivers using them. Some of these drivers support devices using either I/O ports or MMIO. Adding the HAS_IOPORT dependency means MMIO devices that *could* work on systems without I/O ports, won't work. Even the MMIO-only devices are probably old and not of much interest. But if you want to disable them even though they *could* work, I think that's worth mentioning in the commit log. > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > config SCSI_IPS > tristate "IBM ServeRAID support" > - depends on PCI && SCSI > + depends on PCI && HAS_IOPORT && SCSI https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/ips.c?id=v5.17#n6867 > diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx > config SCSI_AIC94XX > tristate "Adaptec AIC94xx SAS/SATA support" > - depends on PCI > + depends on PCI && HAS_IOPORT > select SCSI_SAS_LIBSAS > select FW_LOADER > help https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/aic7xxx/aic79xx_osm_pci.c?id=v5.17#n304 > diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid > config MEGARAID_LEGACY > tristate "LSI Logic Legacy MegaRAID Driver" > - depends on PCI && SCSI > + depends on PCI && HAS_IOPORT && SCSI https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/megaraid.c?id=v5.17#n4190 > diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig > config SCSI_MVSAS > tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support" > - depends on PCI > + depends on PCI && HAS_IOPORT > select SCSI_SAS_LIBSAS > select FW_LOADER > help This turns off all MVSAS support, but apparently only mv_64xx.c uses I/O ports: git grep -E "\<(in|out)[bwl]\>" drivers/scsi/mvsas git grep -E "\<io[rw](8|16|32)\>" drivers/scsi/mvsas It doesn't look like the Makefile is currently set up to build mv_64xx.c separately. Bjorn
On Wed, May 4, 2022 at 10:42 PM Bjorn Helgaas <helgaas@kernel.org> wrote: > > On Fri, Apr 29, 2022 at 03:50:51PM +0200, Niklas Schnelle wrote: > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends > > not being declared. We thus need to add HAS_IOPORT as dependency for > > those drivers using them. > > Some of these drivers support devices using either I/O ports or MMIO. > Adding the HAS_IOPORT dependency means MMIO devices that *could* work > on systems without I/O ports, won't work. > > Even the MMIO-only devices are probably old and not of much interest. > But if you want to disable them even though they *could* work, I think > that's worth mentioning in the commit log. I think this would again make more sense with the original CONFIG_LEGACY_PCI conditional than the generic HAS_IOPORT one. I don't remember what the objection was to that symbol. I think the presence of inb()/outb() is a good indication that a driver is for obsolete hardware, though of course there are important exceptions to this that instead need to have the conditional in the code itself (8250, vga, ipmi, ...) Arnd
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 6e3a04107bb6..40430aa8569b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -333,7 +333,7 @@ config SGIWD93_SCSI config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help 3ware is the only hardware ATA-Raid product in Linux to date. This card is 2,4, or 8 channel master mode support only. @@ -380,7 +380,7 @@ config SCSI_3W_SAS config SCSI_ACARD tristate "ACARD SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This driver supports the ACARD SCSI host adapter. Support Chip <ATP870 ATP876 ATP880 ATP885> @@ -472,7 +472,7 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" depends on SCSI - depends on ISA || EISA || PCI + depends on (ISA || EISA || PCI) && HAS_IOPORT depends on ISA_DMA_API || !ISA help This is a driver for all SCSI host adapters manufactured by @@ -643,7 +643,7 @@ config SCSI_SNIC_DEBUG_FS config SCSI_DMX3191D tristate "DMX3191D SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -657,7 +657,7 @@ config SCSI_FDOMAIN config SCSI_FDOMAIN_PCI tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_FDOMAIN help This is support for Future Domain's PCI SCSI host adapters (TMC-3260) @@ -710,7 +710,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_IPS tristate "IBM ServeRAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> @@ -770,7 +770,7 @@ config SCSI_IBMVFC_TRACE config SCSI_INITIO tristate "Initio 9100U(W) support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio 91XXU(W) SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -781,7 +781,7 @@ config SCSI_INITIO config SCSI_INIA100 tristate "Initio INI-A100U2W support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio INI-A100U2W SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -793,6 +793,7 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" depends on SCSI && PARPORT_PC + depends on HAS_IOPORT help This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -1187,7 +1188,7 @@ config SCSI_SIM710 config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This driver supports PCI SCSI host adapters based on the ASIC diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx index a47dbd500e9a..4bc53eec4c83 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic79xx +++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx @@ -5,7 +5,7 @@ # config SCSI_AIC79XX tristate "Adaptec AIC79xx U320 support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This driver supports all of Adaptec's Ultra 320 PCI-X diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx index 0cfd92ce750a..f0425145a5f4 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx +++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx @@ -5,7 +5,7 @@ # config SCSI_AIC7XXX tristate "Adaptec AIC7xxx Fast -> U160 support" - depends on (PCI || EISA) && SCSI + depends on (PCI || EISA) && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This driver supports all of Adaptec's Fast through Ultra 160 PCI diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig index 71931c371b1c..aaa8dadc6e1c 100644 --- a/drivers/scsi/aic94xx/Kconfig +++ b/drivers/scsi/aic94xx/Kconfig @@ -8,7 +8,7 @@ config SCSI_AIC94XX tristate "Adaptec AIC94xx SAS/SATA support" - depends on PCI + depends on PCI && HAS_IOPORT select SCSI_SAS_LIBSAS select FW_LOADER help diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid index 2adc2afd9f91..3f2ce1eb081c 100644 --- a/drivers/scsi/megaraid/Kconfig.megaraid +++ b/drivers/scsi/megaraid/Kconfig.megaraid @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only config MEGARAID_NEWGEN bool "LSI Logic New Generation RAID Device Drivers" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help LSI Logic RAID Device Drivers config MEGARAID_MM tristate "LSI Logic Management Module (New Driver)" - depends on PCI && SCSI && MEGARAID_NEWGEN + depends on PCI && HAS_IOPORT && SCSI && MEGARAID_NEWGEN help Management Module provides ioctl, sysfs support for LSI Logic RAID controllers. @@ -67,7 +67,7 @@ config MEGARAID_MAILBOX config MEGARAID_LEGACY tristate "LSI Logic Legacy MegaRAID Driver" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490 and 467 SCSI host adapters. This driver also support the all U320 diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig index 79812b80743b..5ac7fd593b17 100644 --- a/drivers/scsi/mvsas/Kconfig +++ b/drivers/scsi/mvsas/Kconfig @@ -9,7 +9,7 @@ config SCSI_MVSAS tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support" - depends on PCI + depends on PCI && HAS_IOPORT select SCSI_SAS_LIBSAS select FW_LOADER help diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig index 802c373fd6d9..a584708d3056 100644 --- a/drivers/scsi/qla2xxx/Kconfig +++ b/drivers/scsi/qla2xxx/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config SCSI_QLA_FC tristate "QLogic QLA2XXX Fibre Channel Support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI depends on SCSI_FC_ATTRS depends on NVME_FC || !NVME_FC select FW_LOADER
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- drivers/scsi/Kconfig | 19 ++++++++++--------- drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +- drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +- drivers/scsi/aic94xx/Kconfig | 2 +- drivers/scsi/megaraid/Kconfig.megaraid | 6 +++--- drivers/scsi/mvsas/Kconfig | 2 +- drivers/scsi/qla2xxx/Kconfig | 2 +- 7 files changed, 18 insertions(+), 17 deletions(-)