diff mbox series

[v3,2/2] thermal: qcom: tsens-v1: Add support for MSM8992/4 TSENS

Message ID 20220501202025.211567-2-konrad.dybcio@somainline.org
State New
Headers show
Series None | expand

Commit Message

Konrad Dybcio May 1, 2022, 8:20 p.m. UTC
MSM8994, despite being heavily based on MSM8974, uses the
1.2 version of TSENS. Also, 8994 being 8994, it has a custom
way of calculating the slope.

MSM8992 in turn is a cut-down version of MSM8994 and uses
the same TSENS hardware, albeit with a different set of sensors.

Also tested on 8976 (by a person who didn't want to be named)
to make sure the 11->16 max_sensors changes didn't break anything.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v2:

- don't use slope before it's initialized (whoops!)
- don't re-assign the same value to p[0..15]
- free calib_rsel
- use the same ops for 8992 and 8994

 drivers/thermal/qcom/tsens-v1.c | 293 ++++++++++++++++++++++++++++++--
 drivers/thermal/qcom/tsens.c    |   6 +
 drivers/thermal/qcom/tsens.h    |   2 +-
 3 files changed, 288 insertions(+), 13 deletions(-)

Comments

Konrad Dybcio June 27, 2022, 2:55 p.m. UTC | #1
On 1.05.2022 22:20, Konrad Dybcio wrote:
> MSM8994, despite being heavily based on MSM8974, uses the
> 1.2 version of TSENS. Also, 8994 being 8994, it has a custom
> way of calculating the slope.
> 
> MSM8992 in turn is a cut-down version of MSM8994 and uses
> the same TSENS hardware, albeit with a different set of sensors.
> 
> Also tested on 8976 (by a person who didn't want to be named)
> to make sure the 11->16 max_sensors changes didn't break anything.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
Bumping this, as it's seemingly went unseen.

Konrad
Dmitry Baryshkov June 27, 2022, 3:15 p.m. UTC | #2
On Sun, 1 May 2022 at 23:21, Konrad Dybcio <konrad.dybcio@somainline.org> wrote:
>
> MSM8994, despite being heavily based on MSM8974, uses the
> 1.2 version of TSENS. Also, 8994 being 8994, it has a custom
> way of calculating the slope.
>
> MSM8992 in turn is a cut-down version of MSM8994 and uses
> the same TSENS hardware, albeit with a different set of sensors.
>
> Also tested on 8976 (by a person who didn't want to be named)
> to make sure the 11->16 max_sensors changes didn't break anything.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
> Changes since v2:
>
> - don't use slope before it's initialized (whoops!)
> - don't re-assign the same value to p[0..15]
> - free calib_rsel
> - use the same ops for 8992 and 8994
>
>  drivers/thermal/qcom/tsens-v1.c | 293 ++++++++++++++++++++++++++++++--
>  drivers/thermal/qcom/tsens.c    |   6 +
>  drivers/thermal/qcom/tsens.h    |   2 +-
>  3 files changed, 288 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 573e261ccca7..58864962f370 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -142,6 +142,99 @@
>  #define CAL_SEL_MASK   7
>  #define CAL_SEL_SHIFT  0
>
> +/* eeprom layout data for 8994 */
> +#define MSM8994_BASE0_MASK     0x3ff
> +#define MSM8994_BASE1_MASK     0xffc00
> +#define MSM8994_BASE0_SHIFT    0
> +#define MSM8994_BASE1_SHIFT    10

Generally I feel that all the _MASK values can be better generated
using the GENMASK and newly defined _SHIFT value.

> +
> +#define MSM8994_S0_MASK        0xf00000
> +#define MSM8994_S1_MASK        0xf000000
> +#define MSM8994_S2_MASK        0xf0000000
> +#define MSM8994_S3_MASK        0xf
> +#define MSM8994_S4_MASK        0xf0
> +#define MSM8994_S5_MASK        0xf00
> +#define MSM8994_S6_MASK        0xf000
> +#define MSM8994_S7_MASK        0xf0000
> +#define MSM8994_S8_MASK        0xf00000
> +#define MSM8994_S9_MASK        0xf000000
> +#define MSM8994_S10_MASK       0xf0000000
> +#define MSM8994_S11_MASK       0xf
> +#define MSM8994_S12_MASK       0xf0
> +#define MSM8994_S13_MASK       0xf00
> +#define MSM8994_S14_MASK       0xf000
> +#define MSM8994_S15_MASK       0xf0000
> +
> +#define MSM8994_S0_SHIFT       20
> +#define MSM8994_S1_SHIFT       24
> +#define MSM8994_S2_SHIFT       28
> +#define MSM8994_S3_SHIFT       0
> +#define MSM8994_S4_SHIFT       4
> +#define MSM8994_S5_SHIFT       8
> +#define MSM8994_S6_SHIFT       12
> +#define MSM8994_S7_SHIFT       16
> +#define MSM8994_S8_SHIFT       20
> +#define MSM8994_S9_SHIFT       24
> +#define MSM8994_S10_SHIFT      28
> +#define MSM8994_S11_SHIFT      0
> +#define MSM8994_S12_SHIFT      4
> +#define MSM8994_S13_SHIFT      8
> +#define MSM8994_S14_SHIFT      12
> +#define MSM8994_S15_SHIFT      16

[skipped the rest]
Konrad Dybcio June 28, 2022, 1:19 p.m. UTC | #3
On 27.06.2022 17:15, Dmitry Baryshkov wrote:
> On Sun, 1 May 2022 at 23:21, Konrad Dybcio <konrad.dybcio@somainline.org> wrote:
>>
>> MSM8994, despite being heavily based on MSM8974, uses the
>> 1.2 version of TSENS. Also, 8994 being 8994, it has a custom
>> way of calculating the slope.
>>
>> MSM8992 in turn is a cut-down version of MSM8994 and uses
>> the same TSENS hardware, albeit with a different set of sensors.
>>
>> Also tested on 8976 (by a person who didn't want to be named)
>> to make sure the 11->16 max_sensors changes didn't break anything.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
>> ---
>> Changes since v2:
>>
>> - don't use slope before it's initialized (whoops!)
>> - don't re-assign the same value to p[0..15]
>> - free calib_rsel
>> - use the same ops for 8992 and 8994
>>
>>  drivers/thermal/qcom/tsens-v1.c | 293 ++++++++++++++++++++++++++++++--
>>  drivers/thermal/qcom/tsens.c    |   6 +
>>  drivers/thermal/qcom/tsens.h    |   2 +-
>>  3 files changed, 288 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
>> index 573e261ccca7..58864962f370 100644
>> --- a/drivers/thermal/qcom/tsens-v1.c
>> +++ b/drivers/thermal/qcom/tsens-v1.c
>> @@ -142,6 +142,99 @@
>>  #define CAL_SEL_MASK   7
>>  #define CAL_SEL_SHIFT  0
>>
>> +/* eeprom layout data for 8994 */
>> +#define MSM8994_BASE0_MASK     0x3ff
>> +#define MSM8994_BASE1_MASK     0xffc00
>> +#define MSM8994_BASE0_SHIFT    0
>> +#define MSM8994_BASE1_SHIFT    10
> 
> Generally I feel that all the _MASK values can be better generated
> using the GENMASK and newly defined _SHIFT value.
Yes, I agree, however I think it'd be better to do it for
all the defines in this file at once in a separate commit.

Konrad
> 
>> +
>> +#define MSM8994_S0_MASK        0xf00000
>> +#define MSM8994_S1_MASK        0xf000000
>> +#define MSM8994_S2_MASK        0xf0000000
>> +#define MSM8994_S3_MASK        0xf
>> +#define MSM8994_S4_MASK        0xf0
>> +#define MSM8994_S5_MASK        0xf00
>> +#define MSM8994_S6_MASK        0xf000
>> +#define MSM8994_S7_MASK        0xf0000
>> +#define MSM8994_S8_MASK        0xf00000
>> +#define MSM8994_S9_MASK        0xf000000
>> +#define MSM8994_S10_MASK       0xf0000000
>> +#define MSM8994_S11_MASK       0xf
>> +#define MSM8994_S12_MASK       0xf0
>> +#define MSM8994_S13_MASK       0xf00
>> +#define MSM8994_S14_MASK       0xf000
>> +#define MSM8994_S15_MASK       0xf0000
>> +
>> +#define MSM8994_S0_SHIFT       20
>> +#define MSM8994_S1_SHIFT       24
>> +#define MSM8994_S2_SHIFT       28
>> +#define MSM8994_S3_SHIFT       0
>> +#define MSM8994_S4_SHIFT       4
>> +#define MSM8994_S5_SHIFT       8
>> +#define MSM8994_S6_SHIFT       12
>> +#define MSM8994_S7_SHIFT       16
>> +#define MSM8994_S8_SHIFT       20
>> +#define MSM8994_S9_SHIFT       24
>> +#define MSM8994_S10_SHIFT      28
>> +#define MSM8994_S11_SHIFT      0
>> +#define MSM8994_S12_SHIFT      4
>> +#define MSM8994_S13_SHIFT      8
>> +#define MSM8994_S14_SHIFT      12
>> +#define MSM8994_S15_SHIFT      16
> 
> [skipped the rest]
>
Dmitry Baryshkov June 28, 2022, 1:27 p.m. UTC | #4
On Tue, 28 Jun 2022 at 16:19, Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
>
>
> On 27.06.2022 17:15, Dmitry Baryshkov wrote:
> > On Sun, 1 May 2022 at 23:21, Konrad Dybcio <konrad.dybcio@somainline.org> wrote:
> >>
> >> MSM8994, despite being heavily based on MSM8974, uses the
> >> 1.2 version of TSENS. Also, 8994 being 8994, it has a custom
> >> way of calculating the slope.
> >>
> >> MSM8992 in turn is a cut-down version of MSM8994 and uses
> >> the same TSENS hardware, albeit with a different set of sensors.
> >>
> >> Also tested on 8976 (by a person who didn't want to be named)
> >> to make sure the 11->16 max_sensors changes didn't break anything.
> >>
> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> >> ---
> >> Changes since v2:
> >>
> >> - don't use slope before it's initialized (whoops!)
> >> - don't re-assign the same value to p[0..15]
> >> - free calib_rsel
> >> - use the same ops for 8992 and 8994
> >>
> >>  drivers/thermal/qcom/tsens-v1.c | 293 ++++++++++++++++++++++++++++++--
> >>  drivers/thermal/qcom/tsens.c    |   6 +
> >>  drivers/thermal/qcom/tsens.h    |   2 +-
> >>  3 files changed, 288 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> >> index 573e261ccca7..58864962f370 100644
> >> --- a/drivers/thermal/qcom/tsens-v1.c
> >> +++ b/drivers/thermal/qcom/tsens-v1.c
> >> @@ -142,6 +142,99 @@
> >>  #define CAL_SEL_MASK   7
> >>  #define CAL_SEL_SHIFT  0
> >>
> >> +/* eeprom layout data for 8994 */
> >> +#define MSM8994_BASE0_MASK     0x3ff
> >> +#define MSM8994_BASE1_MASK     0xffc00
> >> +#define MSM8994_BASE0_SHIFT    0
> >> +#define MSM8994_BASE1_SHIFT    10
> >
> > Generally I feel that all the _MASK values can be better generated
> > using the GENMASK and newly defined _SHIFT value.
> Yes, I agree, however I think it'd be better to do it for
> all the defines in this file at once in a separate commit.

Then I'd suggest fixing the file first and adding 8992/4 on top of that.

>
> Konrad
> >
> >> +
> >> +#define MSM8994_S0_MASK        0xf00000
> >> +#define MSM8994_S1_MASK        0xf000000
> >> +#define MSM8994_S2_MASK        0xf0000000
> >> +#define MSM8994_S3_MASK        0xf
> >> +#define MSM8994_S4_MASK        0xf0
> >> +#define MSM8994_S5_MASK        0xf00
> >> +#define MSM8994_S6_MASK        0xf000
> >> +#define MSM8994_S7_MASK        0xf0000
> >> +#define MSM8994_S8_MASK        0xf00000
> >> +#define MSM8994_S9_MASK        0xf000000
> >> +#define MSM8994_S10_MASK       0xf0000000
> >> +#define MSM8994_S11_MASK       0xf
> >> +#define MSM8994_S12_MASK       0xf0
> >> +#define MSM8994_S13_MASK       0xf00
> >> +#define MSM8994_S14_MASK       0xf000
> >> +#define MSM8994_S15_MASK       0xf0000
> >> +
> >> +#define MSM8994_S0_SHIFT       20
> >> +#define MSM8994_S1_SHIFT       24
> >> +#define MSM8994_S2_SHIFT       28
> >> +#define MSM8994_S3_SHIFT       0
> >> +#define MSM8994_S4_SHIFT       4
> >> +#define MSM8994_S5_SHIFT       8
> >> +#define MSM8994_S6_SHIFT       12
> >> +#define MSM8994_S7_SHIFT       16
> >> +#define MSM8994_S8_SHIFT       20
> >> +#define MSM8994_S9_SHIFT       24
> >> +#define MSM8994_S10_SHIFT      28
> >> +#define MSM8994_S11_SHIFT      0
> >> +#define MSM8994_S12_SHIFT      4
> >> +#define MSM8994_S13_SHIFT      8
> >> +#define MSM8994_S14_SHIFT      12
> >> +#define MSM8994_S15_SHIFT      16
> >
> > [skipped the rest]
> >
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 573e261ccca7..58864962f370 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -142,6 +142,99 @@ 
 #define CAL_SEL_MASK	7
 #define CAL_SEL_SHIFT	0
 
+/* eeprom layout data for 8994 */
+#define MSM8994_BASE0_MASK	0x3ff
+#define MSM8994_BASE1_MASK	0xffc00
+#define MSM8994_BASE0_SHIFT	0
+#define MSM8994_BASE1_SHIFT	10
+
+#define MSM8994_S0_MASK	0xf00000
+#define MSM8994_S1_MASK	0xf000000
+#define MSM8994_S2_MASK	0xf0000000
+#define MSM8994_S3_MASK	0xf
+#define MSM8994_S4_MASK	0xf0
+#define MSM8994_S5_MASK	0xf00
+#define MSM8994_S6_MASK	0xf000
+#define MSM8994_S7_MASK	0xf0000
+#define MSM8994_S8_MASK	0xf00000
+#define MSM8994_S9_MASK	0xf000000
+#define MSM8994_S10_MASK	0xf0000000
+#define MSM8994_S11_MASK	0xf
+#define MSM8994_S12_MASK	0xf0
+#define MSM8994_S13_MASK	0xf00
+#define MSM8994_S14_MASK	0xf000
+#define MSM8994_S15_MASK	0xf0000
+
+#define MSM8994_S0_SHIFT	20
+#define MSM8994_S1_SHIFT	24
+#define MSM8994_S2_SHIFT	28
+#define MSM8994_S3_SHIFT	0
+#define MSM8994_S4_SHIFT	4
+#define MSM8994_S5_SHIFT	8
+#define MSM8994_S6_SHIFT	12
+#define MSM8994_S7_SHIFT	16
+#define MSM8994_S8_SHIFT	20
+#define MSM8994_S9_SHIFT	24
+#define MSM8994_S10_SHIFT	28
+#define MSM8994_S11_SHIFT	0
+#define MSM8994_S12_SHIFT	4
+#define MSM8994_S13_SHIFT	8
+#define MSM8994_S14_SHIFT	12
+#define MSM8994_S15_SHIFT	16
+
+#define MSM8994_CAL_SEL_MASK	0x700000
+#define MSM8994_CAL_SEL_SHIFT	20
+
+#define MSM8994_BASE0_REDUN_MASK	0x7fe00000
+#define MSM8994_BASE1_BIT0_REDUN_MASK	0x80000000
+#define MSM8994_BASE1_BIT1_9_REDUN_MASK	0x1ff
+#define MSM8994_BASE0_REDUN_SHIFT	21
+#define MSM8994_BASE1_BIT0_REDUN_SHIFT_COMPUTE	31
+
+#define MSM8994_S0_REDUN_MASK	0x1e00
+#define MSM8994_S1_REDUN_MASK	0x1e000
+#define MSM8994_S2_REDUN_MASK	0x1e0000
+#define MSM8994_S3_REDUN_MASK	0x1e00000
+#define MSM8994_S4_REDUN_MASK	0x1e000000
+#define MSM8994_S5_REDUN_MASK_BIT0_2	0xe0000000
+#define MSM8994_S5_REDUN_MASK_BIT3	0x800000
+#define MSM8994_S6_REDUN_MASK	0xf000000
+#define MSM8994_S7_REDUN_MASK	0xf0000000
+#define MSM8994_S8_REDUN_MASK	0xf
+#define MSM8994_S9_REDUN_MASK	0xf0
+#define MSM8994_S10_REDUN_MASK	0xf00
+#define MSM8994_S11_REDUN_MASK	0xf000
+#define MSM8994_S12_REDUN_MASK	0xf0000
+#define MSM8994_S13_REDUN_MASK	0xf00000
+#define MSM8994_S14_REDUN_MASK	0xf000000
+#define MSM8994_S15_REDUN_MASK	0xf0000000
+
+#define MSM8994_S0_REDUN_SHIFT	9
+#define MSM8994_S1_REDUN_SHIFT	13
+#define MSM8994_S2_REDUN_SHIFT	17
+#define MSM8994_S3_REDUN_SHIFT	21
+#define MSM8994_S4_REDUN_SHIFT	25
+#define MSM8994_S5_REDUN_SHIFT_BIT0_2	29
+#define MSM8994_S5_REDUN_SHIFT_BIT3	23
+#define MSM8994_S6_REDUN_SHIFT	24
+#define MSM8994_S7_REDUN_SHIFT	28
+#define MSM8994_S8_REDUN_SHIFT	0
+#define MSM8994_S9_REDUN_SHIFT	4
+#define MSM8994_S10_REDUN_SHIFT	8
+#define MSM8994_S11_REDUN_SHIFT	12
+#define MSM8994_S12_REDUN_SHIFT	16
+#define MSM8994_S13_REDUN_SHIFT	20
+#define MSM8994_S14_REDUN_SHIFT	24
+#define MSM8994_S15_REDUN_SHIFT	28
+
+#define MSM8994_REDUN_SEL_MASK		0x7
+#define MSM8994_CAL_SEL_REDUN_MASK	0xe0000000
+#define MSM8994_CAL_SEL_REDUN_SHIFT	29
+
+#define BKP_SEL			0x3
+#define BKP_REDUN_SEL		0xe0000000
+#define BKP_REDUN_SHIFT		29
+
 static void compute_intercept_slope_8976(struct tsens_priv *priv,
 			      u32 *p1, u32 *p2, u32 mode)
 {
@@ -166,6 +259,29 @@  static void compute_intercept_slope_8976(struct tsens_priv *priv,
 	}
 }
 
+/* HW-specific calculations forwardported from msm-3.10 kernel */
+static void compute_intercept_slope_8994(struct tsens_priv *priv,
+			      u32 base0, u32 base1, u32 *p, u32 mode)
+{
+	int adc_code_of_tempx, i, num, den, slope;
+
+	/* slope (m, dy/dx) = SLOPE_FACTOR * (adc_code2 - adc_code1)/(temp_120_degc - temp_30_degc) */
+	num = (base1 - base0) * SLOPE_FACTOR;
+	den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
+	slope = num / den;
+
+	for (i = 0; i < priv->num_sensors; i++) {
+		adc_code_of_tempx = base0 + p[i];
+		priv->sensor[i].slope = (mode == TWO_PT_CALIB) ? slope : SLOPE_DEFAULT;
+
+		priv->sensor[i].offset = (adc_code_of_tempx * SLOPE_FACTOR) -
+				(CAL_DEGC_PT1 *	priv->sensor[i].slope);
+
+		dev_dbg(priv->dev, "%s: offset:%d, slope:%d\n", __func__,
+			priv->sensor[i].offset, priv->sensor[i].slope);
+	}
+}
+
 static int calibrate_v1(struct tsens_priv *priv)
 {
 	u32 base0 = 0, base1 = 0;
@@ -297,14 +413,145 @@  static int calibrate_8976(struct tsens_priv *priv)
 	return 0;
 }
 
-/* v1.x: msm8956,8976,qcs404,405 */
+static int calibrate_8994(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0;
+	u32 p[16] = { [0 ... 15] = 532 }; /* HW-specific, undocumented magic value */
+	int mode = 0;
+	u32 *calib0, *calib1, *calib2, *calib_mode, *calib_rsel;
+	u32 calib_redun_sel;
+
+	/* 0x40d0-0x40dc */
+	calib0 = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(calib0))
+		return PTR_ERR(calib0);
+
+	dev_dbg(priv->dev, "%s: calib0: [0] = %u, [1] = %u, [2] = %u\n",
+		__func__, calib0[0], calib0[1], calib0[2]);
+
+	/* 0x41c0-0x41c8 */
+	calib1 = (u32 *)qfprom_read(priv->dev, "calib_redun1_2");
+	if (IS_ERR(calib1))
+		return PTR_ERR(calib1);
+
+	dev_dbg(priv->dev, "%s: calib1: [0] = %u, [1] = %u\n",
+		__func__, calib1[0], calib1[1]);
+
+	/* 0x41cc-0x41d0 */
+	calib2 = (u32 *)qfprom_read(priv->dev, "calib_redun3");
+	if (IS_ERR(calib2))
+		return PTR_ERR(calib2);
+
+	dev_dbg(priv->dev, "%s: calib2: [0] = %u\n", __func__, calib2[0]);
+
+	/* 0x4440-0x4448 */
+	calib_mode = (u32 *)qfprom_read(priv->dev, "calib_redun4_5");
+	if (IS_ERR(calib_mode))
+		return PTR_ERR(calib_mode);
+
+	dev_dbg(priv->dev, "%s: calib_mode: [0] = %u, [1] = %u\n",
+		__func__, calib1[0], calib1[1]);
+
+	/* 0x4464-0x4468 */
+	calib_rsel = (u32 *)qfprom_read(priv->dev, "calib_rsel");
+	if (IS_ERR(calib_mode))
+		return PTR_ERR(calib_mode);
+
+	dev_dbg(priv->dev, "%s: calib_rsel: [0] = %u\n", __func__, calib_rsel[0]);
+
+	calib_redun_sel =  calib_rsel[0] & MSM8994_CAL_SEL_REDUN_MASK;
+	calib_redun_sel >>= MSM8994_CAL_SEL_REDUN_SHIFT;
+
+	if (calib_redun_sel == BKP_SEL) {
+		dev_dbg(priv->dev, "%s: Calibrating in REDUN mode, calib_redun_sel = %u",
+			__func__, calib_redun_sel);
+		mode = calib_mode[1] & MSM8994_REDUN_SEL_MASK;
+
+		if (mode == TWO_PT_CALIB) {
+			dev_dbg(priv->dev, "%s: REDUN TWO_PT mode, mode = %u", __func__, mode);
+			base0 = (calib1[0] & MSM8994_BASE0_REDUN_MASK) >> MSM8994_BASE0_REDUN_SHIFT;
+			base1 = (calib1[0] & MSM8994_BASE1_BIT0_REDUN_MASK) >> MSM8994_BASE1_BIT0_REDUN_SHIFT_COMPUTE;
+			base1 |= calib1[1] & MSM8994_BASE1_BIT1_9_REDUN_MASK;
+			p[0] = (calib1[1] & MSM8994_S0_REDUN_MASK) >> MSM8994_S0_REDUN_SHIFT;
+			p[1] = (calib1[1] & MSM8994_S1_REDUN_MASK) >> MSM8994_S1_REDUN_SHIFT;
+			p[2] = (calib1[1] & MSM8994_S2_REDUN_MASK) >> MSM8994_S2_REDUN_SHIFT;
+			p[3] = (calib1[1] & MSM8994_S3_REDUN_MASK) >> MSM8994_S3_REDUN_SHIFT;
+			p[4] = (calib1[1] & MSM8994_S4_REDUN_MASK) >> MSM8994_S4_REDUN_SHIFT;
+			p[5] = (calib1[1] & MSM8994_S5_REDUN_MASK_BIT0_2) >> MSM8994_S5_REDUN_SHIFT_BIT0_2;
+			p[5] |= (calib2[0] & MSM8994_S5_REDUN_MASK_BIT3) >> MSM8994_S5_REDUN_SHIFT_BIT3;
+			p[6] = (calib2[0] & MSM8994_S6_REDUN_MASK) >> MSM8994_S6_REDUN_SHIFT;
+			p[7] = (calib2[0] & MSM8994_S7_REDUN_MASK) >> MSM8994_S7_REDUN_SHIFT;
+			p[8] = (calib2[0] & MSM8994_S8_REDUN_MASK) >> MSM8994_S8_REDUN_SHIFT;
+			p[9] = (calib2[0] & MSM8994_S9_REDUN_MASK) >> MSM8994_S9_REDUN_SHIFT;
+			p[10] = (calib2[0] & MSM8994_S10_REDUN_MASK) >> MSM8994_S10_REDUN_SHIFT;
+			p[11] = (calib2[0] & MSM8994_S11_REDUN_MASK) >> MSM8994_S11_REDUN_SHIFT;
+			p[12] = (calib2[0] & MSM8994_S12_REDUN_MASK) >> MSM8994_S12_REDUN_SHIFT;
+			p[13] = (calib2[0] & MSM8994_S13_REDUN_MASK) >> MSM8994_S13_REDUN_SHIFT;
+			p[14] = (calib2[0] & MSM8994_S14_REDUN_MASK) >> MSM8994_S14_REDUN_SHIFT;
+			p[15] = (calib2[0] & MSM8994_S15_REDUN_MASK) >> MSM8994_S15_REDUN_SHIFT;
+		} else {
+			dev_dbg(priv->dev, "%s: REDUN NON-TWO_PT mode, mode = %u", __func__, mode);
+		}
+	} else {
+		dev_dbg(priv->dev, "%s: Calibrating in NOT-REDUN mode, calib_redun_sel = %u",
+			__func__, calib_redun_sel);
+		mode = (calib0[2] & MSM8994_CAL_SEL_MASK) >> MSM8994_CAL_SEL_SHIFT;
+
+		if (mode == TWO_PT_CALIB) {
+			dev_dbg(priv->dev, "%s: NOT-REDUN TWO_PT mode, mode = %u", __func__, mode);
+			base0 = (calib0[0] & MSM8994_BASE0_MASK) >> MSM8994_BASE0_SHIFT;
+			base1 = (calib0[0] & MSM8994_BASE1_MASK) >> MSM8994_BASE1_SHIFT;
+			p[0] = (calib0[0] & MSM8994_S0_MASK) >> MSM8994_S0_SHIFT;
+			p[1] = (calib0[0] & MSM8994_S1_MASK) >> MSM8994_S1_SHIFT;
+			p[2] = (calib0[1] & MSM8994_S2_MASK) >> MSM8994_S2_SHIFT;
+			p[3] = (calib0[1] & MSM8994_S3_MASK) >> MSM8994_S3_SHIFT;
+			p[4] = (calib0[1] & MSM8994_S4_MASK) >> MSM8994_S4_SHIFT;
+			p[5] = (calib0[1] & MSM8994_S5_MASK) >> MSM8994_S5_SHIFT;
+			p[6] = (calib0[1] & MSM8994_S6_MASK) >> MSM8994_S6_SHIFT;
+			p[7] = (calib0[1] & MSM8994_S7_MASK) >> MSM8994_S7_SHIFT;
+			p[8] = (calib0[1] & MSM8994_S8_MASK) >> MSM8994_S8_SHIFT;
+			p[9] = (calib0[1] & MSM8994_S9_MASK) >> MSM8994_S9_SHIFT;
+			p[10] = (calib0[1] & MSM8994_S10_MASK) >> MSM8994_S10_SHIFT;
+			p[11] = (calib0[2] & MSM8994_S11_MASK) >> MSM8994_S11_SHIFT;
+			p[12] = (calib0[2] & MSM8994_S12_MASK) >> MSM8994_S12_SHIFT;
+			p[13] = (calib0[2] & MSM8994_S13_MASK) >> MSM8994_S13_SHIFT;
+			p[14] = (calib0[2] & MSM8994_S14_MASK) >> MSM8994_S14_SHIFT;
+			p[15] = (calib0[2] & MSM8994_S15_MASK) >> MSM8994_S15_SHIFT;
+		} else {
+			dev_dbg(priv->dev, "%s: NOT-REDUN NON-TWO_PT mode, mode = %u", __func__, mode);
+			/* Keep the init-time 532 value */
+		}
+	}
+
+	/* 8992 features less sensors and remaps some */
+	if (priv->num_sensors == 13) {
+		p[6] = p[7];
+		p[7] = p[9];
+		p[8] = p[10];
+		p[9] = p[11];
+		p[10] = p[12];
+		p[11] = p[13];
+		p[12] = p[14];
+	}
+
+	compute_intercept_slope_8994(priv, base0, base1, p, mode);
+	kfree(calib0);
+	kfree(calib1);
+	kfree(calib2);
+	kfree(calib_mode);
+	kfree(calib_rsel);
+
+	return 0;
+}
+
+/* v1.x: msm8956/8976, msm8994 (v1.2), qcs404/qcs405 */
 
 static struct tsens_features tsens_v1_feat = {
 	.ver_major	= VER_1_X,
 	.crit_int	= 0,
 	.adc		= 1,
 	.srot_split	= 1,
-	.max_sensors	= 11,
+	.max_sensors	= 16,
 };
 
 static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
@@ -323,12 +570,12 @@  static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
 	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
 
 	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
-	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
-	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+	REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
 
 	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
-	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
-	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+	REG_FIELD_FOR_EACH_SENSOR16(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR16(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
 	[LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  0,  0),
 	[LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  1,  1),
 	[LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  2,  2),
@@ -349,14 +596,14 @@  static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
 	/* NO CRITICAL INTERRUPT SUPPORT on v1 */
 
 	/* Sn_STATUS */
-	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
-	REG_FIELD_FOR_EACH_SENSOR11(VALID,        TM_Sn_STATUS_OFF, 14, 14),
+	REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR16(VALID,        TM_Sn_STATUS_OFF, 14, 14),
 	/* xxx_STATUS bits: 1 == threshold violated */
-	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
-	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
-	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+	REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
+	REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+	REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
 	/* No CRITICAL field on v1.x */
-	REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
+	REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
 
 	/* TRDY: 1=ready, 0=in progress */
 	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
@@ -388,3 +635,25 @@  struct tsens_plat_data data_8976 = {
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
+
+static const struct tsens_ops ops_8992_8994 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8994,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8992 = {
+	.num_sensors	= 13,
+	.ops		= &ops_8992_8994,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 14 },
+	.feat		= &tsens_v1_feat,
+	.fields	= tsens_v1_regfields,
+};
+
+struct tsens_plat_data data_8994 = {
+	.num_sensors	= 16,
+	.ops		= &ops_8992_8994,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+	.feat		= &tsens_v1_feat,
+	.fields	= tsens_v1_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 154d3cb19c88..514a23370acb 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -982,6 +982,12 @@  static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8974-tsens",
 		.data = &data_8974,
+	}, {
+		.compatible = "qcom,msm8992-tsens",
+		.data = &data_8992,
+	}, {
+		.compatible = "qcom,msm8994-tsens",
+		.data = &data_8994,
 	}, {
 		.compatible = "qcom,msm8976-tsens",
 		.data = &data_8976,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 1471a2c00f15..ca2b0ac914c1 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -590,7 +590,7 @@  extern struct tsens_plat_data data_8960;
 extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
 
 /* TSENS v1 targets */
-extern struct tsens_plat_data data_tsens_v1, data_8976;
+extern struct tsens_plat_data data_tsens_v1, data_8976, data_8992, data_8994;
 
 /* TSENS v2 targets */
 extern struct tsens_plat_data data_8996, data_tsens_v2;