diff mbox series

[5.17,024/225] usb: dwc3: Try usb-role-switch first in dwc3_drd_init

Message ID 20220504153112.490831148@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH May 4, 2022, 4:44 p.m. UTC 
From: Sven Peter <sven@svenpeter.dev>

commit ab7aa2866d295438dc60522f85c5421c6b4f1507 upstream.

If the PHY controller node has a "port" dwc3 tries to find an
extcon device even when "usb-role-switch" is present. This happens
because dwc3_get_extcon() sees that "port" node and then calls
extcon_find_edev_by_node() which will always return EPROBE_DEFER
in that case.

On the other hand, even if an extcon was present and dwc3_get_extcon()
was successful it would still be ignored in favor of "usb-role-switch".

Let's just first check if "usb-role-switch" is configured in the device
tree and directly use it instead and only try to look for an extcon
device otherwise.

Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.")
Cc: stable <stable@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/drd.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff mbox series

Patch

--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -571,16 +571,15 @@  int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
 
+	if (ROLE_SWITCH &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch"))
+		return dwc3_setup_role_switch(dwc);
+
 	dwc->edev = dwc3_get_extcon(dwc);
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (ROLE_SWITCH &&
-	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
-		ret = dwc3_setup_role_switch(dwc);
-		if (ret < 0)
-			return ret;
-	} else if (dwc->edev) {
+	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);