diff mbox series

[RFC,v8,net-next,14/16] net: dsa: ocelot: add external ocelot switch control

Message ID 20220508185313.2222956-15-colin.foster@in-advantage.com
State New
Headers show
Series add support for VSC7512 control over SPI | expand

Commit Message

Colin Foster May 8, 2022, 6:53 p.m. UTC 
Add control of an external VSC7512 chip by way of the ocelot-mfd interface.

Currently the four copper phy ports are fully functional. Communication to
external phys is also functional, but the SGMII / QSGMII interfaces are
currently non-functional.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/mfd/ocelot-core.c           |   3 +
 drivers/net/dsa/ocelot/Kconfig      |  14 ++
 drivers/net/dsa/ocelot/Makefile     |   5 +
 drivers/net/dsa/ocelot/ocelot_ext.c | 368 ++++++++++++++++++++++++++++
 include/soc/mscc/ocelot.h           |   2 +
 5 files changed, 392 insertions(+)
 create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c

Comments

Vladimir Oltean May 9, 2022, 4:27 p.m. UTC | #1 
On Sun, May 08, 2022 at 11:53:11AM -0700, Colin Foster wrote:
> Add control of an external VSC7512 chip by way of the ocelot-mfd interface.
> 
> Currently the four copper phy ports are fully functional. Communication to
> external phys is also functional, but the SGMII / QSGMII interfaces are
> currently non-functional.
> 
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> ---
>  drivers/mfd/ocelot-core.c           |   3 +
>  drivers/net/dsa/ocelot/Kconfig      |  14 ++
>  drivers/net/dsa/ocelot/Makefile     |   5 +
>  drivers/net/dsa/ocelot/ocelot_ext.c | 368 ++++++++++++++++++++++++++++
>  include/soc/mscc/ocelot.h           |   2 +
>  5 files changed, 392 insertions(+)
>  create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c
> 
> diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
> index 117028f7d845..c582b409a9f3 100644
> --- a/drivers/mfd/ocelot-core.c
> +++ b/drivers/mfd/ocelot-core.c
> @@ -112,6 +112,9 @@ static const struct mfd_cell vsc7512_devs[] = {
>  		.of_compatible = "mscc,ocelot-miim",
>  		.num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
>  		.resources = vsc7512_miim1_resources,
> +	}, {
> +		.name = "ocelot-ext-switch",
> +		.of_compatible = "mscc,vsc7512-ext-switch",
>  	},
>  };
>  
> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> index 220b0b027b55..f40b2c7171ad 100644
> --- a/drivers/net/dsa/ocelot/Kconfig
> +++ b/drivers/net/dsa/ocelot/Kconfig
> @@ -1,4 +1,18 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +config NET_DSA_MSCC_OCELOT_EXT
> +	tristate "Ocelot External Ethernet switch support"
> +	depends on NET_DSA && SPI
> +	depends on NET_VENDOR_MICROSEMI
> +	select MDIO_MSCC_MIIM
> +	select MFD_OCELOT_CORE
> +	select MSCC_OCELOT_SWITCH_LIB
> +	select NET_DSA_TAG_OCELOT_8021Q
> +	select NET_DSA_TAG_OCELOT
> +	help
> +	  This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
> +	  when controlled through SPI. It can be used with the Microsemi dev
> +	  boards and an external CPU or custom hardware.
> +
>  config NET_DSA_MSCC_FELIX
>  	tristate "Ocelot / Felix Ethernet switch support"
>  	depends on NET_DSA && PCI
> diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
> index f6dd131e7491..d7f3f5a4461c 100644
> --- a/drivers/net/dsa/ocelot/Makefile
> +++ b/drivers/net/dsa/ocelot/Makefile
> @@ -1,11 +1,16 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
> +obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
>  obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
>  
>  mscc_felix-objs := \
>  	felix.o \
>  	felix_vsc9959.o
>  
> +mscc_ocelot_ext-objs := \
> +	felix.o \
> +	ocelot_ext.o
> +
>  mscc_seville-objs := \
>  	felix.o \
>  	seville_vsc9953.o
> diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
> new file mode 100644
> index 000000000000..ba924f6b8d12
> --- /dev/null
> +++ b/drivers/net/dsa/ocelot/ocelot_ext.c
> @@ -0,0 +1,368 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021-2022 Innovative Advantage Inc.
> + */
> +
> +#include <asm/byteorder.h>
> +#include <linux/iopoll.h>
> +#include <linux/kconfig.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <soc/mscc/ocelot_ana.h>
> +#include <soc/mscc/ocelot_dev.h>
> +#include <soc/mscc/ocelot_qsys.h>
> +#include <soc/mscc/ocelot_vcap.h>
> +#include <soc/mscc/ocelot_ptp.h>
> +#include <soc/mscc/ocelot_sys.h>
> +#include <soc/mscc/ocelot.h>
> +#include <soc/mscc/vsc7514_regs.h>
> +#include "felix.h"
> +
> +#define VSC7512_NUM_PORTS		11
> +
> +static const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +};
> +
> +static const u32 vsc7512_gcb_regmap[] = {
> +	REG(GCB_SOFT_RST,			0x0008),
> +	REG(GCB_MIIM_MII_STATUS,		0x009c),
> +	REG(GCB_PHY_PHY_CFG,			0x00f0),
> +	REG(GCB_PHY_PHY_STAT,			0x00f4),
> +};
> +
> +static const u32 *vsc7512_regmap[TARGET_MAX] = {
> +	[ANA] = vsc7514_ana_regmap,
> +	[QS] = vsc7514_qs_regmap,
> +	[QSYS] = vsc7514_qsys_regmap,
> +	[REW] = vsc7514_rew_regmap,
> +	[SYS] = vsc7514_sys_regmap,
> +	[S0] = vsc7514_vcap_regmap,
> +	[S1] = vsc7514_vcap_regmap,
> +	[S2] = vsc7514_vcap_regmap,
> +	[PTP] = vsc7514_ptp_regmap,
> +	[GCB] = vsc7512_gcb_regmap,
> +	[DEV_GMII] = vsc7514_dev_gmii_regmap,
> +};
> +
> +static void ocelot_ext_reset_phys(struct ocelot *ocelot)
> +{
> +	ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
> +	ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
> +	mdelay(500);
> +}
> +
> +static int ocelot_ext_reset(struct ocelot *ocelot)
> +{
> +	int retries = 100;
> +	int err, val;
> +
> +	ocelot_ext_reset_phys(ocelot);
> +
> +	/* Initialize chip memories */
> +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
> +	if (err)
> +		return err;
> +
> +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
> +	if (err)
> +		return err;
> +
> +	/* MEM_INIT is a self-clearing bit. Wait for it to be clear (should be
> +	 * 100us) before enabling the switch core
> +	 */
> +	do {
> +		msleep(1);
> +		err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
> +					&val);
> +		if (err)
> +			return err;
> +	} while (val && --retries);

Can you use readx_poll_timeout() here?

> +
> +	if (!retries)
> +		return -ETIMEDOUT;
> +
> +	return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
> +}
> +
> +static const struct ocelot_ops ocelot_ext_ops = {
> +	.reset		= ocelot_ext_reset,
> +	.wm_enc		= ocelot_wm_enc,
> +	.wm_dec		= ocelot_wm_dec,
> +	.wm_stat	= ocelot_wm_stat,
> +	.port_to_netdev	= felix_port_to_netdev,
> +	.netdev_to_port	= felix_netdev_to_port,
> +};
> +
> +static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
> +	[ANA] = {
> +		.start	= 0x71880000,
> +		.end	= 0x7188ffff,
> +		.name	= "ana",
> +	},
> +	[QS] = {
> +		.start	= 0x71080000,
> +		.end	= 0x710800ff,
> +		.name	= "qs",
> +	},
> +	[QSYS] = {
> +		.start	= 0x71800000,
> +		.end	= 0x719fffff,
> +		.name	= "qsys",
> +	},
> +	[REW] = {
> +		.start	= 0x71030000,
> +		.end	= 0x7103ffff,
> +		.name	= "rew",
> +	},
> +	[SYS] = {
> +		.start	= 0x71010000,
> +		.end	= 0x7101ffff,
> +		.name	= "sys",
> +	},
> +	[S0] = {
> +		.start	= 0x71040000,
> +		.end	= 0x710403ff,
> +		.name	= "s0",
> +	},
> +	[S1] = {
> +		.start	= 0x71050000,
> +		.end	= 0x710503ff,
> +		.name	= "s1",
> +	},
> +	[S2] = {
> +		.start	= 0x71060000,
> +		.end	= 0x710603ff,
> +		.name	= "s2",
> +	},
> +	[GCB] =	{
> +		.start	= 0x71070000,
> +		.end	= 0x7107022b,
> +		.name	= "devcpu_gcb",
> +	},
> +};
> +
> +static const struct resource vsc7512_port_io_res[] = {
> +	{
> +		.start	= 0x711e0000,
> +		.end	= 0x711effff,
> +		.name	= "port0",
> +	},
> +	{
> +		.start	= 0x711f0000,
> +		.end	= 0x711fffff,
> +		.name	= "port1",
> +	},
> +	{
> +		.start	= 0x71200000,
> +		.end	= 0x7120ffff,
> +		.name	= "port2",
> +	},
> +	{
> +		.start	= 0x71210000,
> +		.end	= 0x7121ffff,
> +		.name	= "port3",
> +	},
> +	{
> +		.start	= 0x71220000,
> +		.end	= 0x7122ffff,
> +		.name	= "port4",
> +	},
> +	{
> +		.start	= 0x71230000,
> +		.end	= 0x7123ffff,
> +		.name	= "port5",
> +	},
> +	{
> +		.start	= 0x71240000,
> +		.end	= 0x7124ffff,
> +		.name	= "port6",
> +	},
> +	{
> +		.start	= 0x71250000,
> +		.end	= 0x7125ffff,
> +		.name	= "port7",
> +	},
> +	{
> +		.start	= 0x71260000,
> +		.end	= 0x7126ffff,
> +		.name	= "port8",
> +	},
> +	{
> +		.start	= 0x71270000,
> +		.end	= 0x7127ffff,
> +		.name	= "port9",
> +	},
> +	{
> +		.start	= 0x71280000,
> +		.end	= 0x7128ffff,
> +		.name	= "port10",
> +	},
> +};
> +
> +static void ocelot_ext_phylink_validate(struct ocelot *ocelot, int port,
> +					unsigned long *supported,
> +					struct phylink_link_state *state)
> +{
> +	struct ocelot_port *ocelot_port = ocelot->ports[port];
> +
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> +
> +	if (state->interface != PHY_INTERFACE_MODE_NA &&

This check is no longer necessary, please look again at the other
phylink validation functions.

> +	    state->interface != ocelot_port->phy_mode) {

Also, I don't see what is the point of providing one phylink validation
method only to replace it later in the patchset with the generic one.
Please squash "net: dsa: ocelot: utilize phylink_generic_validate" into
this.

> +		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> +		return;
> +	}
> +
> +	phylink_set_port_modes(mask);
> +
> +	phylink_set(mask, Pause);
> +	phylink_set(mask, Autoneg);
> +	phylink_set(mask, Asym_Pause);
> +	phylink_set(mask, 10baseT_Half);
> +	phylink_set(mask, 10baseT_Full);
> +	phylink_set(mask, 100baseT_Half);
> +	phylink_set(mask, 100baseT_Full);
> +	phylink_set(mask, 1000baseT_Half);
> +	phylink_set(mask, 1000baseT_Full);
> +
> +	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
> +	bitmap_and(state->advertising, state->advertising, mask,
> +		   __ETHTOOL_LINK_MODE_MASK_NBITS);
> +}
> +
> +static struct regmap *ocelot_ext_regmap_init(struct ocelot *ocelot,
> +					     struct resource *res)
> +{
> +	return ocelot_init_regmap_from_resource(ocelot->dev, res);
> +}
> +
> +static const struct felix_info vsc7512_info = {
> +	.target_io_res			= vsc7512_target_io_res,
> +	.port_io_res			= vsc7512_port_io_res,
> +	.regfields			= vsc7514_regfields,
> +	.map				= vsc7512_regmap,
> +	.ops				= &ocelot_ext_ops,
> +	.stats_layout			= vsc7514_stats_layout,
> +	.vcap				= vsc7514_vcap_props,
> +	.num_mact_rows			= 1024,
> +	.num_ports			= VSC7512_NUM_PORTS,
> +	.num_tx_queues			= OCELOT_NUM_TC,
> +	.phylink_validate		= ocelot_ext_phylink_validate,
> +	.port_modes			= vsc7512_port_modes,
> +	.init_regmap			= ocelot_ext_regmap_init,
> +};
> +
> +static int ocelot_ext_probe(struct platform_device *pdev)
> +{
> +	struct dsa_switch *ds;
> +	struct ocelot *ocelot;
> +	struct felix *felix;
> +	struct device *dev;
> +	int err;
> +
> +	dev = &pdev->dev;

I would prefer if this assignment was part of the variable declaration.

> +
> +	felix = kzalloc(sizeof(*felix), GFP_KERNEL);
> +	if (!felix)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, felix);
> +
> +	ocelot = &felix->ocelot;
> +	ocelot->dev = dev;
> +
> +	ocelot->num_flooding_pgids = 1;
> +
> +	felix->info = &vsc7512_info;
> +
> +	ds = kzalloc(sizeof(*ds), GFP_KERNEL);
> +	if (!ds) {
> +		err = -ENOMEM;
> +		dev_err(dev, "Failed to allocate DSA switch\n");
> +		goto err_free_felix;
> +	}
> +
> +	ds->dev = dev;
> +	ds->num_ports = felix->info->num_ports;
> +	ds->num_tx_queues = felix->info->num_tx_queues;
> +
> +	ds->ops = &felix_switch_ops;
> +	ds->priv = ocelot;
> +	felix->ds = ds;
> +	felix->tag_proto = DSA_TAG_PROTO_OCELOT;
> +
> +	err = dsa_register_switch(ds);
> +	if (err) {
> +		dev_err(dev, "Failed to register DSA switch: %d\n", err);

dev_err_probe please (look at the other drivers)

> +		goto err_free_ds;
> +	}
> +
> +	return 0;
> +
> +err_free_ds:
> +	kfree(ds);
> +err_free_felix:
> +	kfree(felix);
> +	return err;
> +}
> +
> +static int ocelot_ext_remove(struct platform_device *pdev)
> +{
> +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> +
> +	if (!felix)
> +		return 0;
> +
> +	dsa_unregister_switch(felix->ds);
> +
> +	kfree(felix->ds);
> +	kfree(felix);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +
> +	return 0;
> +}
> +
> +static void ocelot_ext_shutdown(struct platform_device *pdev)
> +{
> +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> +
> +	if (!felix)
> +		return;
> +
> +	dsa_switch_shutdown(felix->ds);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +}
> +
> +const struct of_device_id ocelot_ext_switch_of_match[] = {

static

> +	{ .compatible = "mscc,vsc7512-ext-switch" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
> +
> +static struct platform_driver ocelot_ext_switch_driver = {
> +	.driver = {
> +		.name = "ocelot-ext-switch",
> +		.of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
> +	},
> +	.probe = ocelot_ext_probe,
> +	.remove = ocelot_ext_remove,
> +	.shutdown = ocelot_ext_shutdown,
> +};
> +module_platform_driver(ocelot_ext_switch_driver);
> +
> +MODULE_DESCRIPTION("External Ocelot Switch driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index 61888453f913..ade84e86741e 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -402,6 +402,8 @@ enum ocelot_reg {
>  	GCB_MIIM_MII_STATUS,
>  	GCB_MIIM_MII_CMD,
>  	GCB_MIIM_MII_DATA,
> +	GCB_PHY_PHY_CFG,
> +	GCB_PHY_PHY_STAT,
>  	DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
>  	DEV_PORT_MISC,
>  	DEV_EVENTS,
> -- 
> 2.25.1
>
Colin Foster May 10, 2022, 12:02 a.m. UTC | #2 
On Mon, May 09, 2022 at 04:27:22PM +0000, Vladimir Oltean wrote:
> On Sun, May 08, 2022 at 11:53:11AM -0700, Colin Foster wrote:
> > Add control of an external VSC7512 chip by way of the ocelot-mfd interface.
> > 
> > Currently the four copper phy ports are fully functional. Communication to
> > external phys is also functional, but the SGMII / QSGMII interfaces are
> > currently non-functional.
> > 
> > Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> > ---
> >  drivers/mfd/ocelot-core.c           |   3 +
> >  drivers/net/dsa/ocelot/Kconfig      |  14 ++
> >  drivers/net/dsa/ocelot/Makefile     |   5 +
> >  drivers/net/dsa/ocelot/ocelot_ext.c | 368 ++++++++++++++++++++++++++++
> >  include/soc/mscc/ocelot.h           |   2 +
> >  5 files changed, 392 insertions(+)
> >  create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c
> > 
> > diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
> > index 117028f7d845..c582b409a9f3 100644
> > --- a/drivers/mfd/ocelot-core.c
> > +++ b/drivers/mfd/ocelot-core.c
> > @@ -112,6 +112,9 @@ static const struct mfd_cell vsc7512_devs[] = {
> >  		.of_compatible = "mscc,ocelot-miim",
> >  		.num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
> >  		.resources = vsc7512_miim1_resources,
> > +	}, {
> > +		.name = "ocelot-ext-switch",
> > +		.of_compatible = "mscc,vsc7512-ext-switch",
> >  	},
> >  };
> >  
> > diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> > index 220b0b027b55..f40b2c7171ad 100644
> > --- a/drivers/net/dsa/ocelot/Kconfig
> > +++ b/drivers/net/dsa/ocelot/Kconfig
> > @@ -1,4 +1,18 @@
> >  # SPDX-License-Identifier: GPL-2.0-only
> > +config NET_DSA_MSCC_OCELOT_EXT
> > +	tristate "Ocelot External Ethernet switch support"
> > +	depends on NET_DSA && SPI
> > +	depends on NET_VENDOR_MICROSEMI
> > +	select MDIO_MSCC_MIIM
> > +	select MFD_OCELOT_CORE
> > +	select MSCC_OCELOT_SWITCH_LIB
> > +	select NET_DSA_TAG_OCELOT_8021Q
> > +	select NET_DSA_TAG_OCELOT
> > +	help
> > +	  This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
> > +	  when controlled through SPI. It can be used with the Microsemi dev
> > +	  boards and an external CPU or custom hardware.
> > +
> >  config NET_DSA_MSCC_FELIX
> >  	tristate "Ocelot / Felix Ethernet switch support"
> >  	depends on NET_DSA && PCI
> > diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
> > index f6dd131e7491..d7f3f5a4461c 100644
> > --- a/drivers/net/dsa/ocelot/Makefile
> > +++ b/drivers/net/dsa/ocelot/Makefile
> > @@ -1,11 +1,16 @@
> >  # SPDX-License-Identifier: GPL-2.0-only
> >  obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
> > +obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
> >  obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
> >  
> >  mscc_felix-objs := \
> >  	felix.o \
> >  	felix_vsc9959.o
> >  
> > +mscc_ocelot_ext-objs := \
> > +	felix.o \
> > +	ocelot_ext.o
> > +
> >  mscc_seville-objs := \
> >  	felix.o \
> >  	seville_vsc9953.o
> > diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
> > new file mode 100644
> > index 000000000000..ba924f6b8d12
> > --- /dev/null
> > +++ b/drivers/net/dsa/ocelot/ocelot_ext.c
> > @@ -0,0 +1,368 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright 2021-2022 Innovative Advantage Inc.
> > + */
> > +
> > +#include <asm/byteorder.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kconfig.h>
> > +#include <linux/phylink.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <soc/mscc/ocelot_ana.h>
> > +#include <soc/mscc/ocelot_dev.h>
> > +#include <soc/mscc/ocelot_qsys.h>
> > +#include <soc/mscc/ocelot_vcap.h>
> > +#include <soc/mscc/ocelot_ptp.h>
> > +#include <soc/mscc/ocelot_sys.h>
> > +#include <soc/mscc/ocelot.h>
> > +#include <soc/mscc/vsc7514_regs.h>
> > +#include "felix.h"
> > +
> > +#define VSC7512_NUM_PORTS		11
> > +
> > +static const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
> > +	OCELOT_PORT_MODE_INTERNAL,
> > +	OCELOT_PORT_MODE_INTERNAL,
> > +	OCELOT_PORT_MODE_INTERNAL,
> > +	OCELOT_PORT_MODE_INTERNAL,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +	OCELOT_PORT_MODE_SGMII,
> > +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> > +};
> > +
> > +static const u32 vsc7512_gcb_regmap[] = {
> > +	REG(GCB_SOFT_RST,			0x0008),
> > +	REG(GCB_MIIM_MII_STATUS,		0x009c),
> > +	REG(GCB_PHY_PHY_CFG,			0x00f0),
> > +	REG(GCB_PHY_PHY_STAT,			0x00f4),
> > +};
> > +
> > +static const u32 *vsc7512_regmap[TARGET_MAX] = {
> > +	[ANA] = vsc7514_ana_regmap,
> > +	[QS] = vsc7514_qs_regmap,
> > +	[QSYS] = vsc7514_qsys_regmap,
> > +	[REW] = vsc7514_rew_regmap,
> > +	[SYS] = vsc7514_sys_regmap,
> > +	[S0] = vsc7514_vcap_regmap,
> > +	[S1] = vsc7514_vcap_regmap,
> > +	[S2] = vsc7514_vcap_regmap,
> > +	[PTP] = vsc7514_ptp_regmap,
> > +	[GCB] = vsc7512_gcb_regmap,
> > +	[DEV_GMII] = vsc7514_dev_gmii_regmap,
> > +};
> > +
> > +static void ocelot_ext_reset_phys(struct ocelot *ocelot)
> > +{
> > +	ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
> > +	ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
> > +	mdelay(500);
> > +}
> > +
> > +static int ocelot_ext_reset(struct ocelot *ocelot)
> > +{
> > +	int retries = 100;
> > +	int err, val;
> > +
> > +	ocelot_ext_reset_phys(ocelot);
> > +
> > +	/* Initialize chip memories */
> > +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
> > +	if (err)
> > +		return err;
> > +
> > +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
> > +	if (err)
> > +		return err;
> > +
> > +	/* MEM_INIT is a self-clearing bit. Wait for it to be clear (should be
> > +	 * 100us) before enabling the switch core
> > +	 */
> > +	do {
> > +		msleep(1);
> > +		err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
> > +					&val);
> > +		if (err)
> > +			return err;
> > +	} while (val && --retries);
> 
> Can you use readx_poll_timeout() here?

It looks like I can, yes. I'll update.

> 
> > +
> > +	if (!retries)
> > +		return -ETIMEDOUT;
> > +
> > +	return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
> > +}
> > +
> > +static const struct ocelot_ops ocelot_ext_ops = {
> > +	.reset		= ocelot_ext_reset,
> > +	.wm_enc		= ocelot_wm_enc,
> > +	.wm_dec		= ocelot_wm_dec,
> > +	.wm_stat	= ocelot_wm_stat,
> > +	.port_to_netdev	= felix_port_to_netdev,
> > +	.netdev_to_port	= felix_netdev_to_port,
> > +};
> > +
> > +static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
> > +	[ANA] = {
> > +		.start	= 0x71880000,
> > +		.end	= 0x7188ffff,
> > +		.name	= "ana",
> > +	},
> > +	[QS] = {
> > +		.start	= 0x71080000,
> > +		.end	= 0x710800ff,
> > +		.name	= "qs",
> > +	},
> > +	[QSYS] = {
> > +		.start	= 0x71800000,
> > +		.end	= 0x719fffff,
> > +		.name	= "qsys",
> > +	},
> > +	[REW] = {
> > +		.start	= 0x71030000,
> > +		.end	= 0x7103ffff,
> > +		.name	= "rew",
> > +	},
> > +	[SYS] = {
> > +		.start	= 0x71010000,
> > +		.end	= 0x7101ffff,
> > +		.name	= "sys",
> > +	},
> > +	[S0] = {
> > +		.start	= 0x71040000,
> > +		.end	= 0x710403ff,
> > +		.name	= "s0",
> > +	},
> > +	[S1] = {
> > +		.start	= 0x71050000,
> > +		.end	= 0x710503ff,
> > +		.name	= "s1",
> > +	},
> > +	[S2] = {
> > +		.start	= 0x71060000,
> > +		.end	= 0x710603ff,
> > +		.name	= "s2",
> > +	},
> > +	[GCB] =	{
> > +		.start	= 0x71070000,
> > +		.end	= 0x7107022b,
> > +		.name	= "devcpu_gcb",
> > +	},
> > +};
> > +
> > +static const struct resource vsc7512_port_io_res[] = {
> > +	{
> > +		.start	= 0x711e0000,
> > +		.end	= 0x711effff,
> > +		.name	= "port0",
> > +	},
> > +	{
> > +		.start	= 0x711f0000,
> > +		.end	= 0x711fffff,
> > +		.name	= "port1",
> > +	},
> > +	{
> > +		.start	= 0x71200000,
> > +		.end	= 0x7120ffff,
> > +		.name	= "port2",
> > +	},
> > +	{
> > +		.start	= 0x71210000,
> > +		.end	= 0x7121ffff,
> > +		.name	= "port3",
> > +	},
> > +	{
> > +		.start	= 0x71220000,
> > +		.end	= 0x7122ffff,
> > +		.name	= "port4",
> > +	},
> > +	{
> > +		.start	= 0x71230000,
> > +		.end	= 0x7123ffff,
> > +		.name	= "port5",
> > +	},
> > +	{
> > +		.start	= 0x71240000,
> > +		.end	= 0x7124ffff,
> > +		.name	= "port6",
> > +	},
> > +	{
> > +		.start	= 0x71250000,
> > +		.end	= 0x7125ffff,
> > +		.name	= "port7",
> > +	},
> > +	{
> > +		.start	= 0x71260000,
> > +		.end	= 0x7126ffff,
> > +		.name	= "port8",
> > +	},
> > +	{
> > +		.start	= 0x71270000,
> > +		.end	= 0x7127ffff,
> > +		.name	= "port9",
> > +	},
> > +	{
> > +		.start	= 0x71280000,
> > +		.end	= 0x7128ffff,
> > +		.name	= "port10",
> > +	},
> > +};
> > +
> > +static void ocelot_ext_phylink_validate(struct ocelot *ocelot, int port,
> > +					unsigned long *supported,
> > +					struct phylink_link_state *state)
> > +{
> > +	struct ocelot_port *ocelot_port = ocelot->ports[port];
> > +
> > +	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> > +
> > +	if (state->interface != PHY_INTERFACE_MODE_NA &&
> 
> This check is no longer necessary, please look again at the other
> phylink validation functions.
> 
> > +	    state->interface != ocelot_port->phy_mode) {
> 
> Also, I don't see what is the point of providing one phylink validation
> method only to replace it later in the patchset with the generic one.
> Please squash "net: dsa: ocelot: utilize phylink_generic_validate" into
> this.

Yes, that was a poor decision on my part to keep that patch separate. I
should have squashed it, since you already pointed this out last round
and that is exactly what the last commit of this series was addressing.

> 
> > +		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> > +		return;
> > +	}
> > +
> > +	phylink_set_port_modes(mask);
> > +
> > +	phylink_set(mask, Pause);
> > +	phylink_set(mask, Autoneg);
> > +	phylink_set(mask, Asym_Pause);
> > +	phylink_set(mask, 10baseT_Half);
> > +	phylink_set(mask, 10baseT_Full);
> > +	phylink_set(mask, 100baseT_Half);
> > +	phylink_set(mask, 100baseT_Full);
> > +	phylink_set(mask, 1000baseT_Half);
> > +	phylink_set(mask, 1000baseT_Full);
> > +
> > +	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
> > +	bitmap_and(state->advertising, state->advertising, mask,
> > +		   __ETHTOOL_LINK_MODE_MASK_NBITS);
> > +}
> > +
> > +static struct regmap *ocelot_ext_regmap_init(struct ocelot *ocelot,
> > +					     struct resource *res)
> > +{
> > +	return ocelot_init_regmap_from_resource(ocelot->dev, res);
> > +}
> > +
> > +static const struct felix_info vsc7512_info = {
> > +	.target_io_res			= vsc7512_target_io_res,
> > +	.port_io_res			= vsc7512_port_io_res,
> > +	.regfields			= vsc7514_regfields,
> > +	.map				= vsc7512_regmap,
> > +	.ops				= &ocelot_ext_ops,
> > +	.stats_layout			= vsc7514_stats_layout,
> > +	.vcap				= vsc7514_vcap_props,
> > +	.num_mact_rows			= 1024,
> > +	.num_ports			= VSC7512_NUM_PORTS,
> > +	.num_tx_queues			= OCELOT_NUM_TC,
> > +	.phylink_validate		= ocelot_ext_phylink_validate,
> > +	.port_modes			= vsc7512_port_modes,
> > +	.init_regmap			= ocelot_ext_regmap_init,
> > +};
> > +
> > +static int ocelot_ext_probe(struct platform_device *pdev)
> > +{
> > +	struct dsa_switch *ds;
> > +	struct ocelot *ocelot;
> > +	struct felix *felix;
> > +	struct device *dev;
> > +	int err;
> > +
> > +	dev = &pdev->dev;
> 
> I would prefer if this assignment was part of the variable declaration.
> 
> > +
> > +	felix = kzalloc(sizeof(*felix), GFP_KERNEL);
> > +	if (!felix)
> > +		return -ENOMEM;
> > +
> > +	dev_set_drvdata(dev, felix);
> > +
> > +	ocelot = &felix->ocelot;
> > +	ocelot->dev = dev;
> > +
> > +	ocelot->num_flooding_pgids = 1;
> > +
> > +	felix->info = &vsc7512_info;
> > +
> > +	ds = kzalloc(sizeof(*ds), GFP_KERNEL);
> > +	if (!ds) {
> > +		err = -ENOMEM;
> > +		dev_err(dev, "Failed to allocate DSA switch\n");
> > +		goto err_free_felix;
> > +	}
> > +
> > +	ds->dev = dev;
> > +	ds->num_ports = felix->info->num_ports;
> > +	ds->num_tx_queues = felix->info->num_tx_queues;
> > +
> > +	ds->ops = &felix_switch_ops;
> > +	ds->priv = ocelot;
> > +	felix->ds = ds;
> > +	felix->tag_proto = DSA_TAG_PROTO_OCELOT;
> > +
> > +	err = dsa_register_switch(ds);
> > +	if (err) {
> > +		dev_err(dev, "Failed to register DSA switch: %d\n", err);
> 
> dev_err_probe please (look at the other drivers)
> 
> > +		goto err_free_ds;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_free_ds:
> > +	kfree(ds);
> > +err_free_felix:
> > +	kfree(felix);
> > +	return err;
> > +}
> > +
> > +static int ocelot_ext_remove(struct platform_device *pdev)
> > +{
> > +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> > +
> > +	if (!felix)
> > +		return 0;
> > +
> > +	dsa_unregister_switch(felix->ds);
> > +
> > +	kfree(felix->ds);
> > +	kfree(felix);
> > +
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +
> > +	return 0;
> > +}
> > +
> > +static void ocelot_ext_shutdown(struct platform_device *pdev)
> > +{
> > +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> > +
> > +	if (!felix)
> > +		return;
> > +
> > +	dsa_switch_shutdown(felix->ds);
> > +
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +}
> > +
> > +const struct of_device_id ocelot_ext_switch_of_match[] = {
> 
> static
> 
> > +	{ .compatible = "mscc,vsc7512-ext-switch" },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
> > +
> > +static struct platform_driver ocelot_ext_switch_driver = {
> > +	.driver = {
> > +		.name = "ocelot-ext-switch",
> > +		.of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
> > +	},
> > +	.probe = ocelot_ext_probe,
> > +	.remove = ocelot_ext_remove,
> > +	.shutdown = ocelot_ext_shutdown,
> > +};
> > +module_platform_driver(ocelot_ext_switch_driver);
> > +
> > +MODULE_DESCRIPTION("External Ocelot Switch driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> > index 61888453f913..ade84e86741e 100644
> > --- a/include/soc/mscc/ocelot.h
> > +++ b/include/soc/mscc/ocelot.h
> > @@ -402,6 +402,8 @@ enum ocelot_reg {
> >  	GCB_MIIM_MII_STATUS,
> >  	GCB_MIIM_MII_CMD,
> >  	GCB_MIIM_MII_DATA,
> > +	GCB_PHY_PHY_CFG,
> > +	GCB_PHY_PHY_STAT,
> >  	DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
> >  	DEV_PORT_MISC,
> >  	DEV_EVENTS,
> > -- 
> > 2.25.1
> >
diff mbox series

Patch

diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
index 117028f7d845..c582b409a9f3 100644
--- a/drivers/mfd/ocelot-core.c
+++ b/drivers/mfd/ocelot-core.c
@@ -112,6 +112,9 @@  static const struct mfd_cell vsc7512_devs[] = {
 		.of_compatible = "mscc,ocelot-miim",
 		.num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
 		.resources = vsc7512_miim1_resources,
+	}, {
+		.name = "ocelot-ext-switch",
+		.of_compatible = "mscc,vsc7512-ext-switch",
 	},
 };
 
diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
index 220b0b027b55..f40b2c7171ad 100644
--- a/drivers/net/dsa/ocelot/Kconfig
+++ b/drivers/net/dsa/ocelot/Kconfig
@@ -1,4 +1,18 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
+config NET_DSA_MSCC_OCELOT_EXT
+	tristate "Ocelot External Ethernet switch support"
+	depends on NET_DSA && SPI
+	depends on NET_VENDOR_MICROSEMI
+	select MDIO_MSCC_MIIM
+	select MFD_OCELOT_CORE
+	select MSCC_OCELOT_SWITCH_LIB
+	select NET_DSA_TAG_OCELOT_8021Q
+	select NET_DSA_TAG_OCELOT
+	help
+	  This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
+	  when controlled through SPI. It can be used with the Microsemi dev
+	  boards and an external CPU or custom hardware.
+
 config NET_DSA_MSCC_FELIX
 	tristate "Ocelot / Felix Ethernet switch support"
 	depends on NET_DSA && PCI
diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
index f6dd131e7491..d7f3f5a4461c 100644
--- a/drivers/net/dsa/ocelot/Makefile
+++ b/drivers/net/dsa/ocelot/Makefile
@@ -1,11 +1,16 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
+obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
 obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
 
 mscc_felix-objs := \
 	felix.o \
 	felix_vsc9959.o
 
+mscc_ocelot_ext-objs := \
+	felix.o \
+	ocelot_ext.o
+
 mscc_seville-objs := \
 	felix.o \
 	seville_vsc9953.o
diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
new file mode 100644
index 000000000000..ba924f6b8d12
--- /dev/null
+++ b/drivers/net/dsa/ocelot/ocelot_ext.c
@@ -0,0 +1,368 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021-2022 Innovative Advantage Inc.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/iopoll.h>
+#include <linux/kconfig.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <soc/mscc/ocelot_ana.h>
+#include <soc/mscc/ocelot_dev.h>
+#include <soc/mscc/ocelot_qsys.h>
+#include <soc/mscc/ocelot_vcap.h>
+#include <soc/mscc/ocelot_ptp.h>
+#include <soc/mscc/ocelot_sys.h>
+#include <soc/mscc/ocelot.h>
+#include <soc/mscc/vsc7514_regs.h>
+#include "felix.h"
+
+#define VSC7512_NUM_PORTS		11
+
+static const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
+	OCELOT_PORT_MODE_INTERNAL,
+	OCELOT_PORT_MODE_INTERNAL,
+	OCELOT_PORT_MODE_INTERNAL,
+	OCELOT_PORT_MODE_INTERNAL,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+	OCELOT_PORT_MODE_SGMII,
+	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
+};
+
+static const u32 vsc7512_gcb_regmap[] = {
+	REG(GCB_SOFT_RST,			0x0008),
+	REG(GCB_MIIM_MII_STATUS,		0x009c),
+	REG(GCB_PHY_PHY_CFG,			0x00f0),
+	REG(GCB_PHY_PHY_STAT,			0x00f4),
+};
+
+static const u32 *vsc7512_regmap[TARGET_MAX] = {
+	[ANA] = vsc7514_ana_regmap,
+	[QS] = vsc7514_qs_regmap,
+	[QSYS] = vsc7514_qsys_regmap,
+	[REW] = vsc7514_rew_regmap,
+	[SYS] = vsc7514_sys_regmap,
+	[S0] = vsc7514_vcap_regmap,
+	[S1] = vsc7514_vcap_regmap,
+	[S2] = vsc7514_vcap_regmap,
+	[PTP] = vsc7514_ptp_regmap,
+	[GCB] = vsc7512_gcb_regmap,
+	[DEV_GMII] = vsc7514_dev_gmii_regmap,
+};
+
+static void ocelot_ext_reset_phys(struct ocelot *ocelot)
+{
+	ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
+	ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
+	mdelay(500);
+}
+
+static int ocelot_ext_reset(struct ocelot *ocelot)
+{
+	int retries = 100;
+	int err, val;
+
+	ocelot_ext_reset_phys(ocelot);
+
+	/* Initialize chip memories */
+	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+	if (err)
+		return err;
+
+	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
+	if (err)
+		return err;
+
+	/* MEM_INIT is a self-clearing bit. Wait for it to be clear (should be
+	 * 100us) before enabling the switch core
+	 */
+	do {
+		msleep(1);
+		err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
+					&val);
+		if (err)
+			return err;
+	} while (val && --retries);
+
+	if (!retries)
+		return -ETIMEDOUT;
+
+	return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
+}
+
+static const struct ocelot_ops ocelot_ext_ops = {
+	.reset		= ocelot_ext_reset,
+	.wm_enc		= ocelot_wm_enc,
+	.wm_dec		= ocelot_wm_dec,
+	.wm_stat	= ocelot_wm_stat,
+	.port_to_netdev	= felix_port_to_netdev,
+	.netdev_to_port	= felix_netdev_to_port,
+};
+
+static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
+	[ANA] = {
+		.start	= 0x71880000,
+		.end	= 0x7188ffff,
+		.name	= "ana",
+	},
+	[QS] = {
+		.start	= 0x71080000,
+		.end	= 0x710800ff,
+		.name	= "qs",
+	},
+	[QSYS] = {
+		.start	= 0x71800000,
+		.end	= 0x719fffff,
+		.name	= "qsys",
+	},
+	[REW] = {
+		.start	= 0x71030000,
+		.end	= 0x7103ffff,
+		.name	= "rew",
+	},
+	[SYS] = {
+		.start	= 0x71010000,
+		.end	= 0x7101ffff,
+		.name	= "sys",
+	},
+	[S0] = {
+		.start	= 0x71040000,
+		.end	= 0x710403ff,
+		.name	= "s0",
+	},
+	[S1] = {
+		.start	= 0x71050000,
+		.end	= 0x710503ff,
+		.name	= "s1",
+	},
+	[S2] = {
+		.start	= 0x71060000,
+		.end	= 0x710603ff,
+		.name	= "s2",
+	},
+	[GCB] =	{
+		.start	= 0x71070000,
+		.end	= 0x7107022b,
+		.name	= "devcpu_gcb",
+	},
+};
+
+static const struct resource vsc7512_port_io_res[] = {
+	{
+		.start	= 0x711e0000,
+		.end	= 0x711effff,
+		.name	= "port0",
+	},
+	{
+		.start	= 0x711f0000,
+		.end	= 0x711fffff,
+		.name	= "port1",
+	},
+	{
+		.start	= 0x71200000,
+		.end	= 0x7120ffff,
+		.name	= "port2",
+	},
+	{
+		.start	= 0x71210000,
+		.end	= 0x7121ffff,
+		.name	= "port3",
+	},
+	{
+		.start	= 0x71220000,
+		.end	= 0x7122ffff,
+		.name	= "port4",
+	},
+	{
+		.start	= 0x71230000,
+		.end	= 0x7123ffff,
+		.name	= "port5",
+	},
+	{
+		.start	= 0x71240000,
+		.end	= 0x7124ffff,
+		.name	= "port6",
+	},
+	{
+		.start	= 0x71250000,
+		.end	= 0x7125ffff,
+		.name	= "port7",
+	},
+	{
+		.start	= 0x71260000,
+		.end	= 0x7126ffff,
+		.name	= "port8",
+	},
+	{
+		.start	= 0x71270000,
+		.end	= 0x7127ffff,
+		.name	= "port9",
+	},
+	{
+		.start	= 0x71280000,
+		.end	= 0x7128ffff,
+		.name	= "port10",
+	},
+};
+
+static void ocelot_ext_phylink_validate(struct ocelot *ocelot, int port,
+					unsigned long *supported,
+					struct phylink_link_state *state)
+{
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
+
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+	if (state->interface != PHY_INTERFACE_MODE_NA &&
+	    state->interface != ocelot_port->phy_mode) {
+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+		return;
+	}
+
+	phylink_set_port_modes(mask);
+
+	phylink_set(mask, Pause);
+	phylink_set(mask, Autoneg);
+	phylink_set(mask, Asym_Pause);
+	phylink_set(mask, 10baseT_Half);
+	phylink_set(mask, 10baseT_Full);
+	phylink_set(mask, 100baseT_Half);
+	phylink_set(mask, 100baseT_Full);
+	phylink_set(mask, 1000baseT_Half);
+	phylink_set(mask, 1000baseT_Full);
+
+	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static struct regmap *ocelot_ext_regmap_init(struct ocelot *ocelot,
+					     struct resource *res)
+{
+	return ocelot_init_regmap_from_resource(ocelot->dev, res);
+}
+
+static const struct felix_info vsc7512_info = {
+	.target_io_res			= vsc7512_target_io_res,
+	.port_io_res			= vsc7512_port_io_res,
+	.regfields			= vsc7514_regfields,
+	.map				= vsc7512_regmap,
+	.ops				= &ocelot_ext_ops,
+	.stats_layout			= vsc7514_stats_layout,
+	.vcap				= vsc7514_vcap_props,
+	.num_mact_rows			= 1024,
+	.num_ports			= VSC7512_NUM_PORTS,
+	.num_tx_queues			= OCELOT_NUM_TC,
+	.phylink_validate		= ocelot_ext_phylink_validate,
+	.port_modes			= vsc7512_port_modes,
+	.init_regmap			= ocelot_ext_regmap_init,
+};
+
+static int ocelot_ext_probe(struct platform_device *pdev)
+{
+	struct dsa_switch *ds;
+	struct ocelot *ocelot;
+	struct felix *felix;
+	struct device *dev;
+	int err;
+
+	dev = &pdev->dev;
+
+	felix = kzalloc(sizeof(*felix), GFP_KERNEL);
+	if (!felix)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, felix);
+
+	ocelot = &felix->ocelot;
+	ocelot->dev = dev;
+
+	ocelot->num_flooding_pgids = 1;
+
+	felix->info = &vsc7512_info;
+
+	ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+	if (!ds) {
+		err = -ENOMEM;
+		dev_err(dev, "Failed to allocate DSA switch\n");
+		goto err_free_felix;
+	}
+
+	ds->dev = dev;
+	ds->num_ports = felix->info->num_ports;
+	ds->num_tx_queues = felix->info->num_tx_queues;
+
+	ds->ops = &felix_switch_ops;
+	ds->priv = ocelot;
+	felix->ds = ds;
+	felix->tag_proto = DSA_TAG_PROTO_OCELOT;
+
+	err = dsa_register_switch(ds);
+	if (err) {
+		dev_err(dev, "Failed to register DSA switch: %d\n", err);
+		goto err_free_ds;
+	}
+
+	return 0;
+
+err_free_ds:
+	kfree(ds);
+err_free_felix:
+	kfree(felix);
+	return err;
+}
+
+static int ocelot_ext_remove(struct platform_device *pdev)
+{
+	struct felix *felix = dev_get_drvdata(&pdev->dev);
+
+	if (!felix)
+		return 0;
+
+	dsa_unregister_switch(felix->ds);
+
+	kfree(felix->ds);
+	kfree(felix);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	return 0;
+}
+
+static void ocelot_ext_shutdown(struct platform_device *pdev)
+{
+	struct felix *felix = dev_get_drvdata(&pdev->dev);
+
+	if (!felix)
+		return;
+
+	dsa_switch_shutdown(felix->ds);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+}
+
+const struct of_device_id ocelot_ext_switch_of_match[] = {
+	{ .compatible = "mscc,vsc7512-ext-switch" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
+
+static struct platform_driver ocelot_ext_switch_driver = {
+	.driver = {
+		.name = "ocelot-ext-switch",
+		.of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
+	},
+	.probe = ocelot_ext_probe,
+	.remove = ocelot_ext_remove,
+	.shutdown = ocelot_ext_shutdown,
+};
+module_platform_driver(ocelot_ext_switch_driver);
+
+MODULE_DESCRIPTION("External Ocelot Switch driver");
+MODULE_LICENSE("GPL");
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 61888453f913..ade84e86741e 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -402,6 +402,8 @@  enum ocelot_reg {
 	GCB_MIIM_MII_STATUS,
 	GCB_MIIM_MII_CMD,
 	GCB_MIIM_MII_DATA,
+	GCB_PHY_PHY_CFG,
+	GCB_PHY_PHY_STAT,
 	DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
 	DEV_PORT_MISC,
 	DEV_EVENTS,