@@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable)
dp_catalog_ctrl_reset(ctrl->catalog);
- if (enable)
- dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+ /*
+ * all dp controller programmable registers will not
+ * be reset to default value after DP_SW_RESET
+ * therefore interrupt mask bits have to be updated
+ * to enable/disable interrupts
+ */
+ dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
}
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
@@ -98,6 +98,8 @@ struct dp_display_private {
struct dp_ctrl *ctrl;
struct dp_debug *debug;
+ atomic_t suspended;
+
struct dp_usbpd_cb usbpd_cb;
struct dp_display_mode dp_mode;
struct msm_dp dp_display;
@@ -187,6 +189,11 @@ static int dp_add_event(struct dp_display_private *dp_priv, u32 event,
int pndx;
spin_lock_irqsave(&dp_priv->event_lock, flag);
+ if (atomic_read(&dp_priv->suspended)) {
+ spin_unlock_irqrestore(&dp_priv->event_lock, flag);
+ return -EPERM;
+ }
+
pndx = dp_priv->event_pndx + 1;
pndx %= DP_EVENT_Q_MAX;
if (pndx == dp_priv->event_gndx) {
@@ -454,6 +461,13 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized);
+ if (!dp->core_initialized) {
+ DRM_DEBUG_DP("DP core not initialized\n");
+ return;
+ }
+
+ synchronize_irq(dp->irq);
+
dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
dp_aux_deinit(dp->aux);
dp_power_deinit(dp->power);
@@ -1362,6 +1376,8 @@ static int dp_pm_resume(struct device *dev)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized, dp_display->power_on);
+ atomic_set(&dp->suspended, 0);
+
/* start from disconnected state */
dp->hpd_state = ST_DISCONNECTED;
@@ -1431,6 +1447,8 @@ static int dp_pm_suspend(struct device *dev)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized, dp_display->power_on);
+ atomic_inc(&dp->suspended);
+
/* mainlink enabled */
if (dp_power_clk_status(dp->power, DP_CTRL_PM))
dp_ctrl_off_link_stream(dp->ctrl);
dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. This patch removes the enable flag condition checking to always clear mask bits of interrupt status registers to disable interrupts if enable flag is false. This patch also will fix the potential problem happen at system suspend where dp_ctrl_reset_irq_ctrl() was called to try to disable HPD related irqs but the irq is still unmasked unexpectedly and can come in while system are suspending. This leads to bus hangs if the irq is handled after we power down the DP hardware because we run the irq handler and access a device register assuming that no irq could ever come in if we powered down the device. We don't know when the irq will be handled though, so it's possible the irq is pending from before we disable the irq in the hardware. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Fixes: ba0a422be723 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 9 +++++++-- drivers/gpu/drm/msm/dp/dp_display.c | 18 ++++++++++++++++++ 2 files changed, 25 insertions(+), 2 deletions(-)