diff mbox series

[v3,3/4] arm64: dts: qcom: pm660l: Add LPG node

Message ID 20220511190718.764445-3-marijn.suijten@somainline.org
State New
Headers show
Series [v3,1/4] dt-bindings: leds: qcom-lpg: Add compatible for PM660L LPG block | expand

Commit Message

Marijn Suijten May 11, 2022, 7:07 p.m. UTC
The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs.  The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index cfef42353611..636b8d398d96 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -65,6 +65,15 @@  pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm660l_lpg: lpg@b100 {
+			compatible = "qcom,pm660l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800 0xd900>;