diff mbox series

[net-next,v3,2/7] usbnet: smsc95xx: Don't clear read-only PHY interrupt

Message ID 97d9528bb7fbee7313c5c6fb3a80346faaa32c13.1652343655.git.lukas@wunner.de
State New
Headers show
Series Polling be gone on LAN95xx | expand

Commit Message

Lukas Wunner May 12, 2022, 8:42 a.m. UTC 
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver
attempts to clear the signaled interrupts by writing "all ones" to the
Interrupt Status Register.

However the driver only ever enables a single type of interrupt, namely
the PHY Interrupt.  And according to page 119 of the LAN950x datasheet,
its bit in the Interrupt Status Register is read-only.  There's no other
way to clear it than in a separate PHY register:

https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf

Consequently, writing "all ones" to the Interrupt Status Register is
pointless and can be dropped.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
---
 drivers/net/usb/smsc95xx.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index edf0492ad489..2cb44d65bbc3 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -572,10 +572,6 @@  static int smsc95xx_link_reset(struct usbnet *dev)
 	unsigned long flags;
 	int ret;
 
-	ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
-	if (ret < 0)
-		return ret;
-
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 	if (pdata->phydev->duplex != DUPLEX_FULL) {
 		pdata->mac_cr &= ~MAC_CR_FDPX_;