diff mbox series

[v6,5/5] PCI: qcom: Drop manual pipe_clk_src handling

Message ID 20220513175339.2981959-6-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series PCI: qcom: Rework pipe_clk/pipe_clk_src handling | expand

Commit Message

Dmitry Baryshkov May 13, 2022, 5:53 p.m. UTC 
Manual reparenting of pipe_clk_src is being replaced with the parking of
the clock with clk_disable()/clk_enable() in the phy driver. Drop
redundant code switching of the pipe clock between the PHY clock source
and the safe bi_tcxo.

Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 39 +-------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

Comments

Johan Hovold May 18, 2022, 7:41 a.m. UTC | #1 
On Fri, May 13, 2022 at 08:53:39PM +0300, Dmitry Baryshkov wrote:
> Manual reparenting of pipe_clk_src is being replaced with the parking of
> the clock with clk_disable()/clk_enable() in the phy driver. Drop
> redundant code switching of the pipe clock between the PHY clock source
> and the safe bi_tcxo.

Thanks for updating the commit message.

> Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 39 +-------------------------
>  1 file changed, 1 insertion(+), 38 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index a6becafb6a77..b48c899bcc97 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c

> @@ -1496,14 +1461,12 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
>  static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_ddrss_sf_tbu_clk = true,
> -	.pipe_clk_need_muxing = true,
>  	.has_aggre1_clk = true,
>  };
>  
>  static const struct qcom_pcie_cfg sc7280_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_tbu_clk = true,
> -	.pipe_clk_need_muxing = true,
>  };
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {

Note that this hunk fails to apply due to commit 134b5ce3ed33 ("PCI:
qcom: Remove ddrss_sf_tbu clock from SC8180X").

Fixing it up is trivial but still.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>

Johan
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a6becafb6a77..b48c899bcc97 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -164,9 +164,6 @@  struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk_src;
-	struct clk *phy_pipe_clk;
-	struct clk *ref_clk_src;
 };
 
 union qcom_pcie_resources {
@@ -192,7 +189,6 @@  struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
-	unsigned int pipe_clk_need_muxing:1;
 	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
 	unsigned int has_aggre0_clk:1;
@@ -1158,20 +1154,6 @@  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
-	if (pcie->cfg->pipe_clk_need_muxing) {
-		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
-		if (IS_ERR(res->pipe_clk_src))
-			return PTR_ERR(res->pipe_clk_src);
-
-		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
-		if (IS_ERR(res->phy_pipe_clk))
-			return PTR_ERR(res->phy_pipe_clk);
-
-		res->ref_clk_src = devm_clk_get(dev, "ref");
-		if (IS_ERR(res->ref_clk_src))
-			return PTR_ERR(res->ref_clk_src);
-	}
-
 	return 0;
 }
 
@@ -1189,10 +1171,6 @@  static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	/* Set TCXO as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
-
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
@@ -1254,18 +1232,8 @@  static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
 	clk_bulk_disable_unprepare(res->num_clks, res->clks);
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-}
 
-static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	/* Set pipe clock as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
-
-	return 0;
+	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1441,7 +1409,6 @@  static const struct qcom_pcie_ops ops_2_7_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1450,7 +1417,6 @@  static const struct qcom_pcie_ops ops_1_9_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
@@ -1488,7 +1454,6 @@  static const struct qcom_pcie_cfg sm8250_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre0_clk = true,
 	.has_aggre1_clk = true,
 };
@@ -1496,14 +1461,12 @@  static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 };
 
 static const struct dw_pcie_ops dw_pcie_ops = {