@@ -1172,9 +1172,8 @@ static blk_status_t alua_prep_fn(struct scsi_device *sdev, struct request *req)
case SCSI_ACCESS_STATE_OPTIMAL:
case SCSI_ACCESS_STATE_ACTIVE:
case SCSI_ACCESS_STATE_LBA:
- return BLK_STS_OK;
case SCSI_ACCESS_STATE_TRANSITIONING:
- return BLK_STS_AGAIN;
+ return BLK_STS_OK;
default:
req->rq_flags |= RQF_QUIET;
return BLK_STS_IOERR;
@@ -1330,7 +1330,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_0) {
/* FLOGI needs to be 3 for WQE FCFI */
- ct = ((SLI4_CT_FCFI >> 1) & 1) | (SLI4_CT_FCFI & 1);
+ ct = SLI4_CT_FCFI;
bf_set(wqe_ct, &wqe->els_req.wqe_com, ct);
/* Set the fcfi to the fcfi we registered with */
@@ -10720,10 +10720,10 @@ __lpfc_sli_prep_gen_req_s4(struct lpfc_iocbq *cmdiocbq, struct lpfc_dmabuf *bmp,
/* Words 0 - 2 */
bde = (struct ulp_bde64_le *)&cmdwqe->generic.bde;
- bde->addr_low = cpu_to_le32(putPaddrLow(bmp->phys));
- bde->addr_high = cpu_to_le32(putPaddrHigh(bmp->phys));
+ bde->addr_low = bpl->addr_low;
+ bde->addr_high = bpl->addr_high;
bde->type_size = cpu_to_le32(xmit_len);
- bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BLP_64);
+ bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BDE_64);
/* Word 3 */
cmdwqe->gen_req.request_payload_len = xmit_len;
@@ -3826,6 +3826,9 @@ int qlt_abort_cmd(struct qla_tgt_cmd *cmd)
spin_lock_irqsave(&cmd->cmd_lock, flags);
if (cmd->aborted) {
+ if (cmd->sg_mapped)
+ qlt_unmap_sg(vha, cmd);
+
spin_unlock_irqrestore(&cmd->cmd_lock, flags);
/*
* It's normal to see 2 calls in this path:
Four fixes, all in drivers. These patches mosly fix error legs and exceptional conditions (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with lpfc features. The patch is available here: git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes The short changelog is: Brian Bunker (1): scsi: scsi_dh_alua: Properly handle the ALUA transitioning state Gleb Chesnokov (1): scsi: qla2xxx: Fix missed DMA unmap for aborted commands James Smart (2): scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE scsi: lpfc: Fix split code for FLOGI on FCoE And the diffstat: drivers/scsi/device_handler/scsi_dh_alua.c | 3 +-- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 6 +++--- drivers/scsi/qla2xxx/qla_target.c | 3 +++ 4 files changed, 8 insertions(+), 6 deletions(-) With full diff below. James ---