diff mbox series

[4.14,1/3] mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC

Message ID 20220517182746.252893-2-f.fainelli@gmail.com
State Superseded
Headers show
Series [4.14,1/3] mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC | expand

Commit Message

Florian Fainelli May 17, 2022, 6:27 p.m. UTC 
From: Ulf Hansson <ulf.hansson@linaro.org>

commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream

The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH
to complete, are not defined by the eMMC spec. However, a timeout of 10
minutes as is currently being used, is just silly for both of these cases.
Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for
CACHE_FLUSH.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/mmc/core/mmc_ops.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 54686ca4bfb7..44e90062c95a 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -23,7 +23,9 @@ 
 #include "host.h"
 #include "mmc_ops.h"
 
-#define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
+#define MMC_OPS_TIMEOUT_MS		(10 * 60 * 1000) /* 10min*/
+#define MMC_BKOPS_TIMEOUT_MS		(120 * 1000) /* 120s */
+#define MMC_CACHE_FLUSH_TIMEOUT_MS	(30 * 1000) /* 30s */
 
 static const u8 tuning_blk_pattern_4bit[] = {
 	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
@@ -989,7 +991,7 @@  void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 	mmc_retune_hold(card->host);
 
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BKOPS_START, 1, timeout, 0,
+			EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS, 0,
 			use_busy_signal, true, false);
 	if (err) {
 		pr_warn("%s: Error %d starting bkops\n",
@@ -1022,7 +1024,8 @@  int mmc_flush_cache(struct mmc_card *card)
 			(card->ext_csd.cache_size > 0) &&
 			(card->ext_csd.cache_ctrl & 1)) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_FLUSH_CACHE, 1, 0);
+				 EXT_CSD_FLUSH_CACHE, 1,
+				 MMC_CACHE_FLUSH_TIMEOUT_MS);
 		if (err)
 			pr_err("%s: cache flush error %d\n",
 					mmc_hostname(card->host), err);