diff mbox series

[1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms

Message ID 20220518202217.85803-1-dinguyen@kernel.org
State New
Headers show
Series [1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms | expand

Commit Message

Dinh Nguyen May 18, 2022, 8:22 p.m. UTC 
The I2C pins on the SoCFPGA platforms do not go through a GPIO module,
thus cannot be recovered by the default method of by doing a GPIO access.
Only a reset of the I2C IP block can a recovery be successful.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 drivers/i2c/busses/i2c-designware-core.h    |  3 ++-
 drivers/i2c/busses/i2c-designware-master.c  | 19 +++++++++++++++++--
 drivers/i2c/busses/i2c-designware-platdrv.c |  2 ++
 3 files changed, 21 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski May 21, 2022, 3:16 p.m. UTC | #1 
On 18/05/2022 22:22, Dinh Nguyen wrote:
> The I2C pins on Intel's SoCFPGA platform are not connected to GPIOs and
> thus cannot be recovered by the standard GPIO method.
> 
> Document the "intel,socfpga-i2c" binding.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 70b80e710990..4e997e381fb6 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -303,7 +303,8 @@  struct dw_i2c_dev {
 #define MODEL_MSCC_OCELOT	BIT(8)
 #define MODEL_BAIKAL_BT1	BIT(9)
 #define MODEL_AMD_NAVI_GPU	BIT(10)
-#define MODEL_MASK		GENMASK(11, 8)
+#define MODEL_SOCFPGA		BIT(11)
+#define MODEL_MASK		GENMASK(12, 8)
 
 /*
  * Enable UCSI interrupt by writing 0xd at register
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 44a94b225ed8..333ad17b967d 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -813,12 +813,29 @@  static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
 	i2c_dw_init_master(dev);
 }
 
+static int i2c_custom_scl_recovery(struct i2c_adapter *adap)
+{
+	i2c_dw_prepare_recovery(adap);
+	i2c_dw_unprepare_recovery(adap);
+	return 0;
+}
+
 static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 {
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 	struct i2c_adapter *adap = &dev->adapter;
 	struct gpio_desc *gpio;
 
+	switch (dev->flags & MODEL_MASK) {
+	case MODEL_SOCFPGA:
+		rinfo->recover_bus = i2c_custom_scl_recovery;
+		break;
+	default:
+		rinfo->recover_bus = i2c_generic_scl_recovery;
+		break;
+	}
+	adap->bus_recovery_info = rinfo;
+
 	gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
 	if (IS_ERR_OR_NULL(gpio))
 		return PTR_ERR_OR_ZERO(gpio);
@@ -830,10 +847,8 @@  static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 		return PTR_ERR(gpio);
 	rinfo->sda_gpiod = gpio;
 
-	rinfo->recover_bus = i2c_generic_scl_recovery;
 	rinfo->prepare_recovery = i2c_dw_prepare_recovery;
 	rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
-	adap->bus_recovery_info = rinfo;
 
 	dev_info(dev->dev, "running with gpio recovery mode! scl%s",
 		 rinfo->sda_gpiod ? ",sda" : "");
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 70ade5306e45..92dfe3456ca7 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -153,6 +153,8 @@  static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
 	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
 	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
+	{ .compatible = "intel,socfpga-i2c", .data = (void *)MODEL_SOCFPGA },
+
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);