diff mbox series

[V13,8/9] arm64: dts: qcom: pm8008: Add base dts file

Message ID 1653043777-24003-9-git-send-email-quic_c_skakit@quicinc.com
State Superseded
Headers show
Series Add Qualcomm Technologies, Inc. PM8008 regulator driver | expand

Commit Message

Satya Priya Kakitapalli (Temp) May 20, 2022, 10:49 a.m. UTC 
Add base DTS file for pm8008.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in V13:
 - None.

Changes in V12:
 - None.

Changes in V11:
 - Remove intermediate regulators node and add the ldos under
   pm8008@8 node.
 - change the address cells as 2 for pm8008 parent mfd node.
 - add compatible to register the ldos.
 - add reg with i2c client offset and address.

 arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..5606344
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,54 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2022, The Linux Foundation. All rights reserved.
+
+&pm8008_bus {
+	pm8008: pmic@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		pm8008_l1: ldo1@1,4000 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4000>;
+			regulator-name = "pm8008_ldo1";
+		};
+
+		pm8008_l2: ldo2@1,4100 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4100>;
+			regulator-name = "pm8008_ldo2";
+		};
+
+		pm8008_l3: ldo3@1,4200 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4200>;
+			regulator-name = "pm8008_ldo3";
+		};
+
+		pm8008_l4: ldo4@1,4300 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4300>;
+			regulator-name = "pm8008_ldo4";
+		};
+
+		pm8008_l5: ldo5@1,4400 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4400>;
+			regulator-name = "pm8008_ldo5";
+		};
+
+		pm8008_l6: ldo6@1,4500 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4500>;
+			regulator-name = "pm8008_ldo6";
+		};
+
+		pm8008_l7: ldo7@1,4600 {
+			compatible = "qcom,pm8008-regulator";
+			reg = <0x1 0x4600>;
+			regulator-name = "pm8008_ldo7";
+		};
+	};
+};