diff mbox series

usb: dwc3: gadget: Fix IN endpoint max packet size allocation

Message ID 20220523213948.22142-1-quic_wcheng@quicinc.com
State New
Headers show
Series usb: dwc3: gadget: Fix IN endpoint max packet size allocation | expand

Commit Message

Wesley Cheng May 23, 2022, 9:39 p.m. UTC
The current logic to assign the max packet limit for IN endpoints attempts
to take the default HW value and apply the optimal endpoint settings based
on it.  However, if the default value reports a TxFIFO size large enough
for only one max packet, it will divide the value and assign a smaller ep
max packet limit.

For example, if the default TxFIFO size fits 1024B, current logic will
assign 1024/3 = 341B to ep max packet size.  If function drivers attempt to
request for an endpoint with a wMaxPacketSize of 1024B (SS BULK max packet
size) then it will fail, as the gadget is unable to find an endpoint which
can fit the requested size.

Functionally, if the TxFIFO has enough space to fit one max packet, it will
be sufficient, at least when initializing the endpoints.

Fixes: d94ea5319813 ("usb: dwc3: gadget: Properly set maxpacket limit")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4f54f0ef21df..c201df4743b9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2974,6 +2974,7 @@  static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	struct dwc3 *dwc = dep->dwc;
 	u32 mdwidth;
 	int size;
+	int maxpacket;
 
 	mdwidth = dwc3_mdwidth(dwc);
 
@@ -2986,21 +2987,24 @@  static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	else
 		size = DWC31_GTXFIFOSIZ_TXFDEP(size);
 
-	/* FIFO Depth is in MDWDITH bytes. Multiply */
-	size *= mdwidth;
-
 	/*
-	 * To meet performance requirement, a minimum TxFIFO size of 3x
-	 * MaxPacketSize is recommended for endpoints that support burst and a
-	 * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
-	 * support burst. Use those numbers and we can calculate the max packet
-	 * limit as below.
+	 * maxpacket size is determined as part of the following, after assuming
+	 * a mult value of one maxpacket:
+	 * DWC3 revision 280A and prior:
+	 * fifo_size = mult * (max_packet / mdwidth) + 1;
+	 * maxpacket = mdwidth * (fifo_size - 1);
+	 *
+	 * DWC3 revision 290A and onwards:
+	 * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
+	 * maxpacket = mdwidth * ((fifo_size - 1) - 1) - mdwidth;
 	 */
-	if (dwc->maximum_speed >= USB_SPEED_SUPER)
-		size /= 3;
+	if (DWC3_VER_IS_PRIOR(DWC3, 290A))
+		maxpacket = mdwidth * (size - 1);
 	else
-		size /= 2;
+		maxpacket = mdwidth * ((size - 1) - 1) - mdwidth;
 
+	/* Functionally, space for one max packet is sufficient */
+	size = min_t(int, maxpacket, 1024);
 	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 
 	dep->endpoint.max_streams = 16;