diff mbox series

[v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode

Message ID f395ffd03a6594ee11975b708721a33ccf8a4871.1653916330.git.hakan.jansson@infineon.com
State Accepted
Commit 6d912cc3c21fd64c50451c62059683f1fa5102f7
Headers show
Series Bluetooth: hci_bcm: Autobaud mode support | expand

Commit Message

Hakan Jansson May 30, 2022, 3:02 p.m. UTC
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode
selection.

Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.

Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
---
V2 -> V3:
  - Rename DT property and modify description
    https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/

V1 -> V2:
  - Modify property description

 .../devicetree/bindings/net/broadcom-bluetooth.yaml        | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

bluez.test.bot@gmail.com May 30, 2022, 5:22 p.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=646037

---Test result---

Test Summary:
CheckPatch                    PASS      2.94 seconds
GitLint                       FAIL      1.47 seconds
SubjectPrefix                 FAIL      0.65 seconds
BuildKernel                   PASS      35.43 seconds
BuildKernel32                 PASS      31.25 seconds
Incremental Build with patchesPASS      48.75 seconds
TestRunner: Setup             PASS      552.97 seconds
TestRunner: l2cap-tester      PASS      18.88 seconds
TestRunner: bnep-tester       PASS      6.90 seconds
TestRunner: mgmt-tester       PASS      114.46 seconds
TestRunner: rfcomm-tester     PASS      11.12 seconds
TestRunner: sco-tester        PASS      11.08 seconds
TestRunner: smp-tester        PASS      11.06 seconds
TestRunner: userchan-tester   PASS      7.66 seconds

Details
##############################
Test: GitLint - FAIL - 1.47 seconds
Run gitlint with rule in .gitlint
[v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
14: B1 Line exceeds max length (93>80): "    https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/"

[v3,2/2] Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
21: B1 Line exceeds max length (93>80): "    https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/"


##############################
Test: SubjectPrefix - FAIL - 0.65 seconds
Check subject contains "Bluetooth" prefix
"Bluetooth: " is not specified in the subject



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index 5aac094fd217..0a58d0fbcbc4 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -92,6 +92,13 @@  properties:
        pcm-sync-mode: slave, master
        pcm-clock-mode: slave, master
 
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
   interrupts:
     items:
       - description: Handle to the line HOST_WAKE used to wake