diff mbox series

[RESEND,v2] led: multicolor: Fix intensity setting while SW blinking

Message ID 20220601063735.123863-1-sven@svenschwermer.de
State Superseded
Headers show
Series [RESEND,v2] led: multicolor: Fix intensity setting while SW blinking | expand

Commit Message

Sven Schwermer June 1, 2022, 6:37 a.m. UTC 
From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>

When writing to the multi_intensity file, don't unconditionally call
led_set_brightness. By only doing this if blinking is inactive we
prevent blinking from stopping if the blinking is in its off phase while
the file is written.

Instead, if blinking is active, the changed intensity values are applied
upon the next blink. This is consistent with changing the brightness on
monochrome LEDs with active blinking.

Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
---

Notes:
    V1->V2: Change title, add tags

 drivers/leds/led-class-multicolor.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)


base-commit: 210e04ff768142b96452030c4c2627512b30ad95
diff mbox series

Patch

diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c
index e317408583df..5b1479b5d32c 100644
--- a/drivers/leds/led-class-multicolor.c
+++ b/drivers/leds/led-class-multicolor.c
@@ -59,7 +59,8 @@  static ssize_t multi_intensity_store(struct device *dev,
 	for (i = 0; i < mcled_cdev->num_colors; i++)
 		mcled_cdev->subled_info[i].intensity = intensity_value[i];
 
-	led_set_brightness(led_cdev, led_cdev->brightness);
+	if (!test_bit(LED_BLINK_SW, &led_cdev->work_flags))
+		led_set_brightness(led_cdev, led_cdev->brightness);
 	ret = size;
 err_out:
 	mutex_unlock(&led_cdev->led_access);