@@ -21,6 +21,9 @@
#include <linux/iio/machine.h>
#include <linux/mfd/axp20x.h>
+#define AXP192_ADC_EN1_MASK GENMASK(7, 0)
+#define AXP192_ADC_EN2_MASK (BIT(7) | GENMASK(3, 0))
+
#define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))
@@ -31,6 +34,15 @@
#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
+#define AXP192_GPIO30_IN_RANGE_GPIO0 BIT(0)
+#define AXP192_GPIO30_IN_RANGE_GPIO1 BIT(1)
+#define AXP192_GPIO30_IN_RANGE_GPIO2 BIT(2)
+#define AXP192_GPIO30_IN_RANGE_GPIO3 BIT(3)
+#define AXP192_GPIO30_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
+#define AXP192_GPIO30_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
+#define AXP192_GPIO30_IN_RANGE_GPIO2_VAL(x) (((x) & BIT(0)) << 2)
+#define AXP192_GPIO30_IN_RANGE_GPIO3_VAL(x) (((x) & BIT(0)) << 3)
+
#define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
@@ -70,6 +82,25 @@ struct axp20x_adc_iio {
const struct axp_data *data;
};
+enum axp192_adc_channel_v {
+ AXP192_ACIN_V = 0,
+ AXP192_VBUS_V,
+ AXP192_TS_IN,
+ AXP192_GPIO0_V,
+ AXP192_GPIO1_V,
+ AXP192_GPIO2_V,
+ AXP192_GPIO3_V,
+ AXP192_IPSOUT_V,
+ AXP192_BATT_V,
+};
+
+enum axp192_adc_channel_i {
+ AXP192_ACIN_I = 0,
+ AXP192_VBUS_I,
+ AXP192_BATT_CHRG_I,
+ AXP192_BATT_DISCHRG_I,
+};
+
enum axp20x_adc_channel_v {
AXP20X_ACIN_V = 0,
AXP20X_VBUS_V,
@@ -157,6 +188,43 @@ static struct iio_map axp22x_maps[] = {
* The only exception is for the battery. batt_v will be in_voltage6_raw and
* charge current in_current6_raw and discharge current will be in_current7_raw.
*/
+static const struct iio_chan_spec axp192_adc_channels[] = {
+ AXP20X_ADC_CHANNEL(AXP192_ACIN_V, "acin_v", IIO_VOLTAGE,
+ AXP20X_ACIN_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_ACIN_I, "acin_i", IIO_CURRENT,
+ AXP20X_ACIN_I_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_VBUS_V, "vbus_v", IIO_VOLTAGE,
+ AXP20X_VBUS_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_VBUS_I, "vbus_i", IIO_CURRENT,
+ AXP20X_VBUS_I_ADC_H),
+ {
+ .type = IIO_TEMP,
+ .address = AXP20X_TEMP_ADC_H,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .datasheet_name = "pmic_temp",
+ },
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
+ AXP20X_GPIO0_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO1_V, "gpio1_v", IIO_VOLTAGE,
+ AXP20X_GPIO1_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO2_V, "gpio2_v", IIO_VOLTAGE,
+ AXP192_GPIO2_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO3_V, "gpio3_v", IIO_VOLTAGE,
+ AXP192_GPIO3_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_IPSOUT_V, "ipsout_v", IIO_VOLTAGE,
+ AXP20X_IPSOUT_V_HIGH_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_V, "batt_v", IIO_VOLTAGE,
+ AXP20X_BATT_V_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
+ AXP20X_BATT_CHRG_I_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
+ AXP20X_BATT_DISCHRG_I_H),
+ AXP20X_ADC_CHANNEL(AXP192_TS_IN, "ts_v", IIO_VOLTAGE,
+ AXP20X_TS_IN_H),
+};
+
static const struct iio_chan_spec axp20x_adc_channels[] = {
AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE,
AXP20X_ACIN_V_ADC_H),
@@ -277,6 +345,44 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
}
+static int axp192_adc_scale_voltage(int channel, int *val, int *val2)
+{
+ switch (channel) {
+ case AXP192_ACIN_V:
+ case AXP192_VBUS_V:
+ *val = 1;
+ *val2 = 700000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_GPIO0_V:
+ case AXP192_GPIO1_V:
+ case AXP192_GPIO2_V:
+ case AXP192_GPIO3_V:
+ *val = 0;
+ *val2 = 500000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_BATT_V:
+ *val = 1;
+ *val2 = 100000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_IPSOUT_V:
+ *val = 1;
+ *val2 = 400000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_TS_IN:
+ /* 0.8 mV per LSB */
+ *val = 0;
+ *val2 = 800000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
{
switch (channel) {
@@ -380,6 +486,29 @@ static int axp20x_adc_scale_current(int channel, int *val, int *val2)
}
}
+static int axp192_adc_scale(struct iio_chan_spec const *chan, int *val,
+ int *val2)
+{
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ return axp192_adc_scale_voltage(chan->channel, val, val2);
+
+ case IIO_CURRENT:
+ /*
+ * AXP192 current channels are identical to the AXP20x,
+ * therefore we can re-use the scaling function.
+ */
+ return axp20x_adc_scale_current(chan->channel, val, val2);
+
+ case IIO_TEMP:
+ *val = 100;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val,
int *val2)
{
@@ -439,6 +568,42 @@ static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
}
}
+static int axp192_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
+ int *val)
+{
+ struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regmap_read(info->regmap, AXP192_GPIO30_IN_RANGE, val);
+ if (ret < 0)
+ return ret;
+
+ switch (channel) {
+ case AXP192_GPIO0_V:
+ *val &= AXP192_GPIO30_IN_RANGE_GPIO0;
+ break;
+
+ case AXP192_GPIO1_V:
+ *val &= AXP192_GPIO30_IN_RANGE_GPIO1;
+ break;
+
+ case AXP192_GPIO2_V:
+ *val &= AXP192_GPIO30_IN_RANGE_GPIO2;
+ break;
+
+ case AXP192_GPIO3_V:
+ *val &= AXP192_GPIO30_IN_RANGE_GPIO3;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *val = *val ? 700000 : 0;
+
+ return IIO_VAL_INT;
+}
+
static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
int *val)
{
@@ -467,6 +632,22 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
return IIO_VAL_INT;
}
+static int axp192_adc_offset(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ return axp192_adc_offset_voltage(indio_dev, chan->channel, val);
+
+ case IIO_TEMP:
+ *val = -1447;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_offset(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
@@ -483,6 +664,25 @@ static int axp20x_adc_offset(struct iio_dev *indio_dev,
}
}
+static int axp192_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_OFFSET:
+ return axp192_adc_offset(indio_dev, chan, val);
+
+ case IIO_CHAN_INFO_SCALE:
+ return axp192_adc_scale(chan, val, val2);
+
+ case IIO_CHAN_INFO_RAW:
+ return axp20x_adc_raw(indio_dev, chan, val);
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
@@ -543,6 +743,54 @@ static int axp813_read_raw(struct iio_dev *indio_dev,
}
}
+static int axp192_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2,
+ long mask)
+{
+ struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ unsigned int reg, regval;
+
+ /*
+ * The AXP192 PMIC allows the user to choose between 0V and 0.7V offsets
+ * for (independently) GPIO0-3 when in ADC mode.
+ */
+ if (mask != IIO_CHAN_INFO_OFFSET)
+ return -EINVAL;
+
+ if (val != 0 && val != 700000)
+ return -EINVAL;
+
+ val = val ? 1 : 0;
+
+ switch (chan->channel) {
+ case AXP192_GPIO0_V:
+ reg = AXP192_GPIO30_IN_RANGE_GPIO0;
+ regval = AXP192_GPIO30_IN_RANGE_GPIO0_VAL(val);
+ break;
+
+ case AXP192_GPIO1_V:
+ reg = AXP192_GPIO30_IN_RANGE_GPIO1;
+ regval = AXP192_GPIO30_IN_RANGE_GPIO1_VAL(val);
+ break;
+
+ case AXP192_GPIO2_V:
+ reg = AXP192_GPIO30_IN_RANGE_GPIO2;
+ regval = AXP192_GPIO30_IN_RANGE_GPIO2_VAL(val);
+ break;
+
+ case AXP192_GPIO3_V:
+ reg = AXP192_GPIO30_IN_RANGE_GPIO3;
+ regval = AXP192_GPIO30_IN_RANGE_GPIO3_VAL(val);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(info->regmap, AXP192_GPIO30_IN_RANGE, reg,
+ regval);
+}
+
static int axp20x_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2,
long mask)
@@ -581,6 +829,18 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
regval);
}
+static int axp192_read_label(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan, char *label)
+{
+ return snprintf(label, PAGE_SIZE, "%s\n", chan->datasheet_name);
+}
+
+static const struct iio_info axp192_adc_iio_info = {
+ .read_raw = axp192_read_raw,
+ .write_raw = axp192_write_raw,
+ .read_label = axp192_read_label,
+};
+
static const struct iio_info axp20x_adc_iio_info = {
.read_raw = axp20x_read_raw,
.write_raw = axp20x_write_raw,
@@ -620,19 +880,29 @@ struct axp_data {
int num_channels;
struct iio_chan_spec const *channels;
unsigned long adc_en1_mask;
+ unsigned long adc_en2_mask;
int (*adc_rate)(struct axp20x_adc_iio *info,
int rate);
- bool adc_en2;
struct iio_map *maps;
};
+static const struct axp_data axp192_data = {
+ .iio_info = &axp192_adc_iio_info,
+ .num_channels = ARRAY_SIZE(axp192_adc_channels),
+ .channels = axp192_adc_channels,
+ .adc_en1_mask = AXP192_ADC_EN1_MASK,
+ .adc_en2_mask = AXP192_ADC_EN2_MASK,
+ .adc_rate = axp20x_adc_rate,
+ .maps = axp20x_maps,
+};
+
static const struct axp_data axp20x_data = {
.iio_info = &axp20x_adc_iio_info,
.num_channels = ARRAY_SIZE(axp20x_adc_channels),
.channels = axp20x_adc_channels,
.adc_en1_mask = AXP20X_ADC_EN1_MASK,
+ .adc_en2_mask = AXP20X_ADC_EN2_MASK,
.adc_rate = axp20x_adc_rate,
- .adc_en2 = true,
.maps = axp20x_maps,
};
@@ -642,7 +912,6 @@ static const struct axp_data axp22x_data = {
.channels = axp22x_adc_channels,
.adc_en1_mask = AXP22X_ADC_EN1_MASK,
.adc_rate = axp22x_adc_rate,
- .adc_en2 = false,
.maps = axp22x_maps,
};
@@ -652,11 +921,11 @@ static const struct axp_data axp813_data = {
.channels = axp813_adc_channels,
.adc_en1_mask = AXP22X_ADC_EN1_MASK,
.adc_rate = axp813_adc_rate,
- .adc_en2 = false,
.maps = axp22x_maps,
};
static const struct of_device_id axp20x_adc_of_match[] = {
+ { .compatible = "x-powers,axp192-adc", .data = (void *)&axp192_data, },
{ .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
{ .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
{ .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
@@ -665,6 +934,7 @@ static const struct of_device_id axp20x_adc_of_match[] = {
MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
static const struct platform_device_id axp20x_adc_id_match[] = {
+ { .name = "axp192-adc", .driver_data = (kernel_ulong_t)&axp192_data, },
{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
{ .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
@@ -710,10 +980,11 @@ static int axp20x_probe(struct platform_device *pdev)
/* Enable the ADCs on IP */
regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
- if (info->data->adc_en2)
- /* Enable GPIO0/1 and internal temperature ADCs */
+ if (info->data->adc_en2_mask)
+ /* Enable GPIO and internal temperature ADCs */
regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
- AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
+ info->data->adc_en2_mask,
+ info->data->adc_en2_mask);
/* Configure ADCs rate */
info->data->adc_rate(info, 100);
@@ -738,7 +1009,7 @@ static int axp20x_probe(struct platform_device *pdev)
fail_map:
regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
- if (info->data->adc_en2)
+ if (info->data->adc_en2_mask)
regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
return ret;
@@ -754,7 +1025,7 @@ static int axp20x_remove(struct platform_device *pdev)
regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
- if (info->data->adc_en2)
+ if (info->data->adc_en2_mask)
regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
return 0;
The AXP192 is identical to the AXP20x, except for the addition of two more GPIO ADC channels. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- drivers/iio/adc/axp20x_adc.c | 289 +++++++++++++++++++++++++++++++++-- 1 file changed, 280 insertions(+), 9 deletions(-)