[2/4] arm64: dts: qcom: add SC8280XP platform

Message ID	20220607214113.4057684-3-bjorn.andersson@linaro.org
State	Superseded
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Manivannan Sadhasivam <mani@kernel.org> Cc: Jassi Brar <jassisinghbrar@gmail.com>, Johan Hovold <johan+linaro@kernel.org>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/4] arm64: dts: qcom: add SC8280XP platform Date: Tue, 7 Jun 2022 14:41:11 -0700 Message-Id: <20220607214113.4057684-3-bjorn.andersson@linaro.org> In-Reply-To: <20220607214113.4057684-1-bjorn.andersson@linaro.org> References: <20220607214113.4057684-1-bjorn.andersson@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	None \| expand [2/4] arm64: dts: qcom: add SC8280XP platform [4/4] arm64: dts: qcom: add SA8540P and ADP

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi new file mode 100644 index 000000000000..4143813643ad --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -0,0 +1,2195 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,sc8280xp.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8280xp", "qcom,scm"; + }; + }; + + aggre1_noc: interconncet-aggre1-noc { + compatible = "qcom,sc8280xp-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sc8280xp-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sc8280xp-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sc8280xp-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sc8280xp-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sc8280xp-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sc8280xp-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8280xp-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sc8280xp-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sc8280xp-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sc8280xp-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sc8280xp-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@80000000 { + reg = <0 0x80000000 0 0x860000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + memory@80880000 { + reg = <0 0x80880000 0 0x80000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + memory@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + memory@83b00000 { + reg = <0 0x83b00000 0 0x1700000>; + no-map; + }; + + memory@85b00000 { + reg = <0 0x85b00000 0 0xc00000>; + no-map; + }; + + pil_adsp_mem: memory@86c00000 { + reg = <0 0x86c00000 0 0x2000000>; + no-map; + }; + + pil_nsp0_mem: memory@8a100000 { + reg = <0 0x8a100000 0 0x1e00000>; + no-map; + }; + + pil_nsp1_mem: memory@8c600000 { + reg = <0 0x8c600000 0 0x1e00000>; + no-map; + }; + + memory@aeb00000 { + reg = <0 0xaeb00000 0 0x16600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_nsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_nsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_0_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_1_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qup2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xa3 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup2_uart17: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + qup2_i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x563 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup0_i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x83 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + ufs_card_hc: ufshc@1da4000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01da4000 0 0x3000>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_card_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_CARD_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + iommus = <&apps_smmu 0x4a0 0x0>; + + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&gcc GCC_UFS_CARD_AHB_CLK>, + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_card_phy: phy@1da7000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01da7000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + + resets = <&ufs_card_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_card_phy_lanes: phy@1da7400 { + reg = <0 0x01da7400 0 0x108>, + <0 0x01da7600 0 0x1e0>, + <0 0x01da7c00 0 0x1dc>, + <0 0x01da7800 0 0x108>, + <0 0x01da7a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + usb_0_hsphy: phy@88e5000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e5000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy0: phy@88e7000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + }; + + usb_2_hsphy1: phy@88e8000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e8000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + }; + + usb_2_hsphy2: phy@88e9000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e9000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; + }; + + usb_2_hsphy3: phy@88ea000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088ea000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; + }; + + usb_2_qmpphy0: phy-wrapper@88ef000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088ef000 0 0x1c8>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP0_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + usb_2_ssphy0: phy@88efe00 { + reg = <0 0x088efe00 0 0x160>, + <0 0x088f0000 0 0x1ec>, + <0 0x088ef200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy0_pipe_clk"; + }; + }; + + usb_2_qmpphy1: phy-wrapper@88f1000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088f1000 0 0x1c8>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP1_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + usb_2_ssphy1: phy@88efe00 { + reg = <0 0x088f1e00 0 0x160>, + <0 0x088f2000 0 0x1ec>, + <0 0x088f1200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy1_pipe_clk"; + }; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc8280xp-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_LCX>, + <&rpmhpd SC8280XP_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + usb_0_qmpphy: phy-wrapper@88ec000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088ec000 0 0x1e4>, + <0 0x088eb000 0 0x40>, + <0 0x088ed000 0 0x1c8>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_EUD_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + usb_0_ssphy: usb3-phy@88e9200 { + reg = <0 0x088eb400 0 0x100>, + <0 0x088eb600 0 0x3ec>, + <0 0x088ec400 0 0x1f0>, + <0 0x088eba00 0 0x100>, + <0 0x088ebc00 0 0x3ec>, + <0 0x088ec700 0 0x64>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb0_phy_pipe_clk_src"; + }; + + usb_0_dpphy: dp-phy@88ed200 { + reg = <0 0x088ed200 0 0x200>, + <0 0x088ed400 0 0x200>, + <0 0x088eda00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_1_hsphy: phy@8902000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x08902000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@8904000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x08904000 0 0x1e4>, + <0 0x08903000 0 0x40>, + <0 0x08905000 0 0x1c8>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x08903400 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904400 0 0x1f0>, + <0 0x08903a00 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904200 0 0x18>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb1_phy_pipe_clk_src"; + }; + + usb_1_dpphy: dp-phy@88ed200 { + reg = <0 0x08904200 0 0x200>, + <0 0x08904400 0 0x200>, + <0 0x08904a00 0 0x200>, + <0 0x08904600 0 0x200>, + <0 0x08904800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_2: usb@a4f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "core", "iface", "bus_aggr", "utmi", "sleep", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>, + <&pdc 126 IRQ_TYPE_EDGE_RISING>, + <&pdc 129 IRQ_TYPE_EDGE_RISING>, + <&pdc 128 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_MP_GDSC>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xd93c>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x800 0x0>; + phys = <&usb_2_hsphy0>, <&usb_2_ssphy0>; + phy-names = "usb2-phy", "usb3-phy"; + /* + * TODO: Link controller to all 6 phys. + * phys = <&usb_2_hsphy0>, <&usb_2_ssphy0>, + * <&usb_2_hsphy1>, <&usb_2_ssphy1>, + * <&usb_2_hsphy2>, + * <&usb_2_hsphy3>; + * phy-names = "usb2-phy", "usb3-phy"; + */ + }; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "core", "iface", "bus_aggr", "utmi", "sleep", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x820 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "core", "iface", "bus_aggr", "utmi", "sleep", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x860 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8280xp-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 3>, + <69 86 1>, + <70 520 54>, + <124 609 28>, + <159 638 1>, + <160 720 8>, + <168 801 1>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 1>, + <216 646 5>, + <221 390 5>, + <226 700 3>, + <229 240 3>, + <232 269 1>, + <233 377 1>, + <234 372 1>, + <235 138 1>, + <236 857 1>, + <237 860 1>, + <238 137 1>, + <239 668 1>, + <240 366 1>, + <241 949 1>, + <242 815 5>, + <247 769 1>, + <248 768 1>, + <249 663 1>, + <250 799 2>, + <252 798 1>, + <253 765 1>, + <254 763 1>, + <255 454 1>, + <258 139 1>, + <259 786 2>, + <261 370 2>, + <263 158 2>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c26000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8280xp-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8280xp-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + remoteproc_nsp0: remoteproc@1b300000 { + compatible = "qcom,sc8280xp-nsp0-pas"; + reg = <0 0x1b300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp0_mem>; + + qcom,smem-states = <&smp2p_nsp0_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp0"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x3181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x3182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x3186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x3187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x3188 0x0420>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x318c 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x318d 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x318e 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x318f 0x0420>; + }; + }; + }; + }; + + remoteproc_nsp1: remoteproc@21300000 { + compatible = "qcom,sc8280xp-nsp1-pas"; + reg = <0 0x21300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp1_mem>; + + qcom,smem-states = <&smp2p_nsp1_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp1"; + qcom,remote-pid = <12>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +};

[2/4] arm64: dts: qcom: add SC8280XP platform

Commit Message

Comments

Patch