diff mbox series

[3/9] Input: synaptics-rmi4 - fix command completion check for bootloader v7/v8

Message ID 20220608124808.51402-4-matthias.schiffer@ew.tq-group.com
State Accepted
Commit b4d6c6a07faa5c860421182d7599f12acfc7dfd0
Headers show
Series Input: synaptics-rmi4 - Bootloader v7/v8 firmware update improvements | expand

Commit Message

Matthias Schiffer June 8, 2022, 12:48 p.m. UTC 
The command register is reset to 0 when a command has completed. Check
for this condition instead of the error status, which will not accurately
reflect completion. In particular, the incorrect condition caused every
command error to be reported as a timeout.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
 drivers/input/rmi4/rmi_f34.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
index 3afc94f679ed..b811706fb77b 100644
--- a/drivers/input/rmi4/rmi_f34.c
+++ b/drivers/input/rmi4/rmi_f34.c
@@ -114,13 +114,13 @@  static irqreturn_t rmi_f34_attention(int irq, void *ctx)
 			complete(&f34->v5.cmd_done);
 	} else {
 		ret = rmi_read_block(f34->fn->rmi_dev,
-				     f34->fn->fd.data_base_addr +
-						f34->v7.off.flash_status,
-				     &status, sizeof(status));
-		rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
+					f34->fn->fd.data_base_addr +
+						f34->v7.off.flash_cmd,
+					&status, sizeof(status));
+		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: cmd: %#02x, ret: %d\n",
 			__func__, status, ret);
 
-		if (!ret && !(status & 0x1f))
+		if (!ret && status == CMD_V7_IDLE)
 			complete(&f34->v7.cmd_done);
 	}