diff mbox series

arm64: dts: arm/fvp-base-revc: Remove 'panel-dpi' compatible

Message ID 20220610204057.2203419-1-robh@kernel.org
State Accepted
Commit 7fc96d7162c0506a7a27bf8dfaaa3ba83509457f
Headers show
Series arm64: dts: arm/fvp-base-revc: Remove 'panel-dpi' compatible | expand

Commit Message

Rob Herring June 10, 2022, 8:40 p.m. UTC
The rtsm-display panel timing node was removed in commit 928faf5e3e8d
("arm64: dts: fvp: Remove panel timings"). Without the node, 'panel-dpi'
is not needed either.

Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/fvp-base-revc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Sudeep Holla June 14, 2022, 10:14 a.m. UTC | #1
On Fri, 10 Jun 2022 14:40:57 -0600, Rob Herring wrote:
> The rtsm-display panel timing node was removed in commit 928faf5e3e8d
> ("arm64: dts: fvp: Remove panel timings"). Without the node, 'panel-dpi'
> is not needed either.
>

Applied to sudeep.holla/linux (for-next/juno), thanks!

[1/1] arm64: dts: arm/fvp-base-revc: Remove 'panel-dpi' compatible
      https://git.kernel.org/sudeep.holla/c/7fc96d7162

--
Regards,
Sudeep
Linus Walleij June 28, 2022, 8:22 p.m. UTC | #2
On Fri, Jun 10, 2022 at 10:41 PM Rob Herring <robh@kernel.org> wrote:

> The rtsm-display panel timing node was removed in commit 928faf5e3e8d
> ("arm64: dts: fvp: Remove panel timings"). Without the node, 'panel-dpi'
> is not needed either.
>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Rob Herring <robh@kernel.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index a496e39e6204..5f6f30c801a7 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -186,7 +186,7 @@  smmu: iommu@2b400000 {
 	};
 
 	panel {
-		compatible = "arm,rtsm-display", "panel-dpi";
+		compatible = "arm,rtsm-display";
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&clcd_pads>;