| Message ID | 20220611204651.19947-2-zajec5@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [V3,1/2] mtd: allow getting MTD device associated with a specific DT node | expand |
Hello Rafał, On 11.06.22 22:46, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > U-Boot stores its setup as environment variables. It's a list of > key-value pairs stored on flash device with a custom header. > > This commit adds an NVMEM driver that: > 1. Provides NVMEM access to environment vars binary data > 2. Extracts variables as NVMEM cells > > Current Linux's NVMEM sysfs API allows reading whole NVMEM data block. > It can be used by user-space tools for reading U-Boot env vars block > without the hassle of finding its location. Parsing will still need to > be re-done there. > > Kernel-parsed NVMEM cells can be read however by Linux drivers. This may > be uesful for Ethernet drivers for reading device MAC address which is useful. > often stored as U-Boot env variable. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > V3: Use of_get_mtd_device_by_node() (thanks Ahmad) & update description Looks better now! > V2: Drop ARCH_BCM4908 dependency as there are plenty architectures using > U-Boot bootloader. Thanks Srinivas. > > As noticed by Ahmad a missing NVMEM subsystem feature is user-space > access to parsed NVMEM cells. That is something I started working on > some time ago and I'm planning to get back to at some point, please > check: > [PATCH 2/2] nvmem: expose NVMEM cells in sysfs > https://lore.kernel.org/lkml/20211220064730.28806-2-zajec5@gmail.com/ Thanks for the link. > --- > MAINTAINERS | 1 + > drivers/nvmem/Kconfig | 11 ++ > drivers/nvmem/Makefile | 2 + > drivers/nvmem/u-boot-env.c | 231 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 245 insertions(+) > create mode 100644 drivers/nvmem/u-boot-env.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 475e28365385..43b427fa76b0 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -20411,6 +20411,7 @@ U-BOOT ENVIRONMENT VARIABLES > M: Rafał Miłecki <rafal@milecki.pl> > S: Maintained > F: Documentation/devicetree/bindings/nvmem/u-boot,env.yaml > +F: drivers/nvmem/u-boot-env.c > > UACCE ACCELERATOR FRAMEWORK > M: Zhangfei Gao <zhangfei.gao@linaro.org> > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig > index d72d879a6d34..5f1b32b953b9 100644 > --- a/drivers/nvmem/Kconfig > +++ b/drivers/nvmem/Kconfig > @@ -344,4 +344,15 @@ config NVMEM_APPLE_EFUSES > This driver can also be built as a module. If so, the module will > be called nvmem-apple-efuses. > > +config NVMEM_U_BOOT_ENV > + tristate "U-Boot environment variables support" > + depends on OF && MTD > + select CRC32 > + help > + U-Boot stores its setup as environment variables. This driver adds > + support for verifying & exporting such data. It also exposes variables > + as NVMEM cells so they can be referenced by other drivers. > + > + If compiled as module it will be called nvmem_u-boot-env. You should probably mention that this is tied to MTD somewhere in the help text as u-boot env on EEPROM/raw eMMC is not covered by this. > + > endif > diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile > index c710b64f9fe4..399f9972d45b 100644 > --- a/drivers/nvmem/Makefile > +++ b/drivers/nvmem/Makefile > @@ -69,3 +69,5 @@ obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o > nvmem-apple-efuses-y := apple-efuses.o > obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o > nvmem-microchip-otpc-y := microchip-otpc.o > +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o > +nvmem_u-boot-env-y := u-boot-env.o > diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c > new file mode 100644 > index 000000000000..92c2dd11d99f > --- /dev/null > +++ b/drivers/nvmem/u-boot-env.c > @@ -0,0 +1,231 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl> > + */ > + > +#include <linux/crc32.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/mtd/mtd.h> > +#include <linux/nvmem-consumer.h> > +#include <linux/nvmem-provider.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +enum u_boot_env_format { > + U_BOOT_FORMAT_SINGLE, > + U_BOOT_FORMAT_REDUNDANT, > +}; > + > +struct u_boot_env { > + struct device *dev; > + enum u_boot_env_format format; > + > + /* Parent device */ > + struct mtd_info *mtd; > + size_t offset; > + size_t size; > + > + /* Cells */ > + struct nvmem_cell_info *cells; > + int ncells; > +}; > + > +struct u_boot_env_image_single { > + __le32 crc32; > + uint8_t data[0]; GCC zero-length arrays are being phased out in favor of flexible array members. Just replace the [0] with []. See Documentation/process/deprecated.rst for more information. > +} __packed; > + > +struct u_boot_env_image_redundant { > + __le32 crc32; > + u8 mark; > + uint8_t data[0]; Same here > +} __packed; > + > +static int u_boot_env_read(void *context, unsigned int offset, void *val, > + size_t bytes) > +{ > + struct u_boot_env *priv = context; > + struct device *dev = priv->dev; > + size_t bytes_read; > + int err; > + > + err = mtd_read(priv->mtd, priv->offset + offset, bytes, &bytes_read, val); Nitpick: if you called u_boot_env::offset u_boot_env::start instead, code would be more readable IMO. > + if (err && !mtd_is_bitflip(err)) { > + dev_err(dev, "Failed to read from mtd: %d\n", err); Nitpick: %pe > + return err; > + } > + > + if (bytes_read != bytes) { > + dev_err(dev, "Failed to read %zd bytes\n", bytes); %zu > + return -EIO; > + } > + > + return 0; > +} > + > +static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, > + size_t data_offset, size_t data_len) > +{ > + struct device *dev = priv->dev; > + char *data = buf + data_offset; > + char *var, *value, *eq; > + int idx; > + > + priv->ncells = 0; > + for (var = data; var < data + data_len && *var; var += strlen(var) + 1) > + priv->ncells++; > + > + priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL); > + if (!priv->cells) > + return -ENOMEM; > + > + for (var = data, idx = 0; > + var < data + data_len && *var; > + var = value + strlen(value) + 1, idx++) { > + eq = strchr(var, '='); > + if (!eq) > + break; > + *eq = '\0'; > + value = eq + 1; > + > + priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL); > + if (!priv->cells[idx].name) > + return -ENOMEM; > + priv->cells[idx].offset = data_offset + value - data; > + priv->cells[idx].bytes = strlen(value); U-Boot environment can't hold binary values? > + } > + > + if (WARN_ON(idx != priv->ncells)) > + priv->ncells = idx; > + > + return 0; > +} > + > +static int u_boot_env_parse(struct u_boot_env *priv) > +{ > + struct device *dev = priv->dev; > + size_t crc32_data_offset; > + size_t crc32_data_len; > + size_t crc32_offset; > + size_t data_offset; > + size_t data_len; > + uint32_t crc32; > + uint32_t calc; > + size_t bytes; > + uint8_t *buf; > + int err; > + > + buf = kcalloc(1, priv->size, GFP_KERNEL); > + if (!buf) { > + err = -ENOMEM; > + goto err_out; > + } > + > + err = mtd_read(priv->mtd, priv->offset, priv->size, &bytes, buf); > + if ((err && !mtd_is_bitflip(err)) || bytes != priv->size) { > + dev_err(dev, "Failed to read from mtd: %d\n", err); > + goto err_kfree; > + } > + > + switch (priv->format) { > + case U_BOOT_FORMAT_SINGLE: > + crc32_offset = offsetof(struct u_boot_env_image_single, crc32); > + crc32_data_offset = offsetof(struct u_boot_env_image_single, data); > + data_offset = offsetof(struct u_boot_env_image_single, data); > + break; > + case U_BOOT_FORMAT_REDUNDANT: > + crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32); > + crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark); > + data_offset = offsetof(struct u_boot_env_image_redundant, data); > + break; > + } > + crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset)); > + crc32_data_len = priv->size - crc32_data_offset; > + data_len = priv->size - data_offset; > + > + calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L; > + if (calc != crc32) { > + dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32); > + err = -EINVAL; > + goto err_kfree; > + } > + > + buf[priv->size - 1] = '\0'; > + err = u_boot_env_add_cells(priv, buf, data_offset, data_len); > + if (err) > + dev_err(dev, "Failed to add cells: %d\n", err); > + > +err_kfree: > + kfree(buf); > +err_out: > + return err; > +} > + > +static const struct of_device_id u_boot_env_of_match_table[] = { > + { .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, }, > + { .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, > + { .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, > + {}, > +}; > + > +static int u_boot_env_probe(struct platform_device *pdev) > +{ > + struct nvmem_config config = { > + .name = "u-boot-env", > + .reg_read = u_boot_env_read, > + }; > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + const struct of_device_id *of_id; > + struct u_boot_env *priv; > + int err; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + priv->dev = dev; > + > + of_id = of_match_device(u_boot_env_of_match_table, dev); > + if (!of_id) > + return -EINVAL; No need for the check. > + priv->format = (uintptr_t)of_id->data; of_device_get_match_data() can be used instead and compatible list moved to the bottom. > + > + if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) || bad idea. Not 64-bit safe. > + of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) { Likewise. Also you don't take #address-cells, #size-cells into account. There's of_translate_address() for that, not sure if there's something more specific. But parsing reg like this is not the right way. > + dev_err(dev, "Failed to read \"reg\" property\n"); > + return -EINVAL; > + } > + > + priv->mtd = of_get_mtd_device_by_node(np->parent); > + if (IS_ERR(priv->mtd)) { > + dev_err(dev, "Failed to get %pOF MTD: %ld\n", np->parent, PTR_ERR(priv->mtd)); dev_err -> dev_err_probe. To take care of EPROBE_DEFER. > + return PTR_ERR(priv->mtd); > + } > + > + err = u_boot_env_parse(priv); > + if (err) > + return err; > + > + config.dev = dev; > + config.cells = priv->cells; > + config.ncells = priv->ncells; > + config.priv = priv; > + config.size = priv->size; > + > + return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config)); > +} > + > +static struct platform_driver u_boot_env_driver = { > + .probe = u_boot_env_probe, > + .driver = { > + .name = "u_boot_env", > + .of_match_table = u_boot_env_of_match_table, > + }, > +}; > +module_platform_driver(u_boot_env_driver); > + > +MODULE_AUTHOR("Rafał Miłecki"); > +MODULE_LICENSE("GPL"); > +MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table); Cheers, Ahmad
Hello, > > +static int u_boot_env_probe(struct platform_device *pdev) > > +{ > > + struct nvmem_config config = { > > + .name = "u-boot-env", > > + .reg_read = u_boot_env_read, > > + }; > > + struct device *dev = &pdev->dev; > > + struct device_node *np = dev->of_node; > > + const struct of_device_id *of_id; > > + struct u_boot_env *priv; > > + int err; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + priv->dev = dev; > > + > > + of_id = of_match_device(u_boot_env_of_match_table, dev); > > + if (!of_id) > > + return -EINVAL; > > + priv->format = (uintptr_t)of_id->data; > > + > > + if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) || > > + of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) { > > + dev_err(dev, "Failed to read \"reg\" property\n"); > > + return -EINVAL; > > + } > > + > > + priv->mtd = of_get_mtd_device_by_node(np->parent); > > + if (IS_ERR(priv->mtd)) { > > + dev_err(dev, "Failed to get %pOF MTD: %ld\n", np->parent, PTR_ERR(priv->mtd)); > > + return PTR_ERR(priv->mtd); > > + } > > Partitions are mtd devices themselves and the mtd layer directly > associates these devices to their OF node, so it should be possible > to do a of_get_mtd_device_by_node(np) which gets you the partition. > You can use the whole mtd device then and do not have to fiddle with > reg properties, offsets and sizes in your driver yourself. Just for the record, there will be one mtd device per partition, but the "full" mtd device will only exist if the configuration contains CONFIG_MTD_PARTITIONED_MASTER. Thanks, Miquèl
On 14.06.2022 08:45, Ahmad Fatoum wrote: >> + if (err && !mtd_is_bitflip(err)) { >> + dev_err(dev, "Failed to read from mtd: %d\n", err); > > Nitpick: %pe My "err" variable in int, not a pointer (I don't use PTR_ERR()). >> +static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, >> + size_t data_offset, size_t data_len) >> +{ >> + struct device *dev = priv->dev; >> + char *data = buf + data_offset; >> + char *var, *value, *eq; >> + int idx; >> + >> + priv->ncells = 0; >> + for (var = data; var < data + data_len && *var; var += strlen(var) + 1) >> + priv->ncells++; >> + >> + priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL); >> + if (!priv->cells) >> + return -ENOMEM; >> + >> + for (var = data, idx = 0; >> + var < data + data_len && *var; >> + var = value + strlen(value) + 1, idx++) { >> + eq = strchr(var, '='); >> + if (!eq) >> + break; >> + *eq = '\0'; >> + value = eq + 1; >> + >> + priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL); >> + if (!priv->cells[idx].name) >> + return -ENOMEM; >> + priv->cells[idx].offset = data_offset + value - data; >> + priv->cells[idx].bytes = strlen(value); > > U-Boot environment can't hold binary values? I believe it can't. In any case \0 is a always a separator. >> + } >> + >> + if (WARN_ON(idx != priv->ncells)) >> + priv->ncells = idx; >> + >> + return 0; >> +}
diff --git a/MAINTAINERS b/MAINTAINERS index 475e28365385..43b427fa76b0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20411,6 +20411,7 @@ U-BOOT ENVIRONMENT VARIABLES M: Rafał Miłecki <rafal@milecki.pl> S: Maintained F: Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +F: drivers/nvmem/u-boot-env.c UACCE ACCELERATOR FRAMEWORK M: Zhangfei Gao <zhangfei.gao@linaro.org> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index d72d879a6d34..5f1b32b953b9 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -344,4 +344,15 @@ config NVMEM_APPLE_EFUSES This driver can also be built as a module. If so, the module will be called nvmem-apple-efuses. +config NVMEM_U_BOOT_ENV + tristate "U-Boot environment variables support" + depends on OF && MTD + select CRC32 + help + U-Boot stores its setup as environment variables. This driver adds + support for verifying & exporting such data. It also exposes variables + as NVMEM cells so they can be referenced by other drivers. + + If compiled as module it will be called nvmem_u-boot-env. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index c710b64f9fe4..399f9972d45b 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -69,3 +69,5 @@ obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o nvmem-apple-efuses-y := apple-efuses.o obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o nvmem-microchip-otpc-y := microchip-otpc.o +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o +nvmem_u-boot-env-y := u-boot-env.o diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c new file mode 100644 index 000000000000..92c2dd11d99f --- /dev/null +++ b/drivers/nvmem/u-boot-env.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl> + */ + +#include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +enum u_boot_env_format { + U_BOOT_FORMAT_SINGLE, + U_BOOT_FORMAT_REDUNDANT, +}; + +struct u_boot_env { + struct device *dev; + enum u_boot_env_format format; + + /* Parent device */ + struct mtd_info *mtd; + size_t offset; + size_t size; + + /* Cells */ + struct nvmem_cell_info *cells; + int ncells; +}; + +struct u_boot_env_image_single { + __le32 crc32; + uint8_t data[0]; +} __packed; + +struct u_boot_env_image_redundant { + __le32 crc32; + u8 mark; + uint8_t data[0]; +} __packed; + +static int u_boot_env_read(void *context, unsigned int offset, void *val, + size_t bytes) +{ + struct u_boot_env *priv = context; + struct device *dev = priv->dev; + size_t bytes_read; + int err; + + err = mtd_read(priv->mtd, priv->offset + offset, bytes, &bytes_read, val); + if (err && !mtd_is_bitflip(err)) { + dev_err(dev, "Failed to read from mtd: %d\n", err); + return err; + } + + if (bytes_read != bytes) { + dev_err(dev, "Failed to read %zd bytes\n", bytes); + return -EIO; + } + + return 0; +} + +static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, + size_t data_offset, size_t data_len) +{ + struct device *dev = priv->dev; + char *data = buf + data_offset; + char *var, *value, *eq; + int idx; + + priv->ncells = 0; + for (var = data; var < data + data_len && *var; var += strlen(var) + 1) + priv->ncells++; + + priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL); + if (!priv->cells) + return -ENOMEM; + + for (var = data, idx = 0; + var < data + data_len && *var; + var = value + strlen(value) + 1, idx++) { + eq = strchr(var, '='); + if (!eq) + break; + *eq = '\0'; + value = eq + 1; + + priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL); + if (!priv->cells[idx].name) + return -ENOMEM; + priv->cells[idx].offset = data_offset + value - data; + priv->cells[idx].bytes = strlen(value); + } + + if (WARN_ON(idx != priv->ncells)) + priv->ncells = idx; + + return 0; +} + +static int u_boot_env_parse(struct u_boot_env *priv) +{ + struct device *dev = priv->dev; + size_t crc32_data_offset; + size_t crc32_data_len; + size_t crc32_offset; + size_t data_offset; + size_t data_len; + uint32_t crc32; + uint32_t calc; + size_t bytes; + uint8_t *buf; + int err; + + buf = kcalloc(1, priv->size, GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto err_out; + } + + err = mtd_read(priv->mtd, priv->offset, priv->size, &bytes, buf); + if ((err && !mtd_is_bitflip(err)) || bytes != priv->size) { + dev_err(dev, "Failed to read from mtd: %d\n", err); + goto err_kfree; + } + + switch (priv->format) { + case U_BOOT_FORMAT_SINGLE: + crc32_offset = offsetof(struct u_boot_env_image_single, crc32); + crc32_data_offset = offsetof(struct u_boot_env_image_single, data); + data_offset = offsetof(struct u_boot_env_image_single, data); + break; + case U_BOOT_FORMAT_REDUNDANT: + crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32); + crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark); + data_offset = offsetof(struct u_boot_env_image_redundant, data); + break; + } + crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset)); + crc32_data_len = priv->size - crc32_data_offset; + data_len = priv->size - data_offset; + + calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L; + if (calc != crc32) { + dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32); + err = -EINVAL; + goto err_kfree; + } + + buf[priv->size - 1] = '\0'; + err = u_boot_env_add_cells(priv, buf, data_offset, data_len); + if (err) + dev_err(dev, "Failed to add cells: %d\n", err); + +err_kfree: + kfree(buf); +err_out: + return err; +} + +static const struct of_device_id u_boot_env_of_match_table[] = { + { .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, }, + { .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, + { .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, + {}, +}; + +static int u_boot_env_probe(struct platform_device *pdev) +{ + struct nvmem_config config = { + .name = "u-boot-env", + .reg_read = u_boot_env_read, + }; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct of_device_id *of_id; + struct u_boot_env *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = dev; + + of_id = of_match_device(u_boot_env_of_match_table, dev); + if (!of_id) + return -EINVAL; + priv->format = (uintptr_t)of_id->data; + + if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) || + of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) { + dev_err(dev, "Failed to read \"reg\" property\n"); + return -EINVAL; + } + + priv->mtd = of_get_mtd_device_by_node(np->parent); + if (IS_ERR(priv->mtd)) { + dev_err(dev, "Failed to get %pOF MTD: %ld\n", np->parent, PTR_ERR(priv->mtd)); + return PTR_ERR(priv->mtd); + } + + err = u_boot_env_parse(priv); + if (err) + return err; + + config.dev = dev; + config.cells = priv->cells; + config.ncells = priv->ncells; + config.priv = priv; + config.size = priv->size; + + return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config)); +} + +static struct platform_driver u_boot_env_driver = { + .probe = u_boot_env_probe, + .driver = { + .name = "u_boot_env", + .of_match_table = u_boot_env_of_match_table, + }, +}; +module_platform_driver(u_boot_env_driver); + +MODULE_AUTHOR("Rafał Miłecki"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);