@@ -92,20 +92,20 @@ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
0x0201006c>; /* DOWN */
};
- gpio_keys: volume_keys0 {
+ gpio_keys: volume-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
- switch9 {
+ switch-9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch10 {
+ switch-10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -36,10 +36,10 @@ cpu@0 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- back_button {
+ back-button {
label = "Back Button";
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
@@ -47,7 +47,7 @@ back_button {
wakeup-source;
};
- front_button {
+ front-button {
label = "Front Button";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
@@ -70,61 +70,61 @@ expander-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- record {
+ key-record {
label = "Record";
/* linux,code = <BTN_0>; */
gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
};
- play {
+ key-play {
label = "Play";
linux,code = <KEY_PLAY>;
gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
};
- Stop {
+ key-stop {
label = "Stop";
linux,code = <KEY_STOP>;
gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
};
- fwd {
+ key-fwd {
label = "FWD";
linux,code = <KEY_FASTFORWARD>;
gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
};
- rwd {
+ key-rwd {
label = "RWD";
linux,code = <KEY_REWIND>;
gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
};
- shift {
+ key-shift {
label = "Shift";
linux,code = <KEY_LEFTSHIFT>;
gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
};
- Mode {
+ key-mode {
label = "Mode";
linux,code = <BTN_MODE>;
gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
};
- Menu {
+ key-menu {
label = "Menu";
linux,code = <KEY_MENU>;
gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
};
- Up {
+ key-up {
label = "Up";
linux,code = <KEY_UP>;
gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
};
- Down {
+ key-down {
label = "Down";
linux,code = <KEY_DOWN>;
gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
@@ -37,55 +37,55 @@ gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- user_pb {
+ button-user {
label = "User Push Button";
linux,code = <BTN_0>;
gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
};
- user_sw_1 {
+ switch-1 {
label = "User Switch 1";
linux,code = <BTN_1>;
gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
};
- user_sw_2 {
+ switch-2 {
label = "User Switch 2";
linux,code = <BTN_2>;
gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
};
- user_sw_3 {
+ switch-3 {
label = "User Switch 3";
linux,code = <BTN_3>;
gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
};
- user_sw_4 {
+ switch-4 {
label = "User Switch 4";
linux,code = <BTN_4>;
gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
};
- user_sw_5 {
+ switch-5 {
label = "User Switch 5";
linux,code = <BTN_5>;
gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
};
- user_sw_6 {
+ switch-6 {
label = "User Switch 6";
linux,code = <BTN_6>;
gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
};
- user_sw_7 {
+ switch-7 {
label = "User Switch 7";
linux,code = <BTN_7>;
gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
};
- user_sw_8 {
+ switch-8 {
label = "User Switch 8";
linux,code = <BTN_8>;
gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
@@ -98,7 +98,7 @@ v1_5d: fixed-regulator-v1_5d{
vin-supply = <&v1_5dreg>;
};
- gpio_keys: gpio_keys {
+ gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins_default>;
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/am335x-evm.dts | 6 +++--- arch/arm/boot/dts/am335x-shc.dts | 6 +++--- arch/arm/boot/dts/am3517-evm-ui.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/am3517-evm.dts | 18 +++++++++--------- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- 5 files changed, 26 insertions(+), 26 deletions(-)