diff mbox series

[3/5] rtw88: fix stopping queues in wrong timing when HW scan

Message ID 20220610065102.17580-4-pkshih@realtek.com
State Superseded
Headers show
Series rtw88: use const pointer of chip_info and fix hw_scan misbehavior | expand

Commit Message

Ping-Ke Shih June 10, 2022, 6:51 a.m. UTC 
From: Chih-Kang Chang <gary.chang@realtek.com>

HW scan need to start queues after switch to OP channel, and stop queues
before leaving op channel. However, in original code, driver will start
queues after switch to OP channel, but stop queues until switch to OP
channel next time, that will cause packets transmitted in wrong channel.
So we fix the stop queues timing.

Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/fw.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 2cceae93f0eb5..bb2e743d2ab22 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -2217,7 +2217,12 @@  void rtw_hw_scan_chan_switch(struct rtw_dev *rtwdev, struct sk_buff *skb)
 				chan_type = COEX_SWITCH_TO_24G_NOFORSCAN;
 			rtw_coex_switchband_notify(rtwdev, chan_type);
 		}
-		if (rtw_is_op_chan(rtwdev, chan))
+		/* The channel of C2H RTW_SCAN_NOTIFY_ID_PRESWITCH is next
+		 * channel that hardware will switch. We need to stop queue
+		 * if next channel is non-op channel.
+		 */
+		if (!rtw_is_op_chan(rtwdev, chan) &&
+		    rtw_is_op_chan(rtwdev, hal->current_channel))
 			ieee80211_stop_queues(rtwdev->hw);
 	}