@@ -206,6 +206,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-pogo_e02.dtb \
+ kirkwood-pogoplug-series-4.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
new file mode 100644
@@ -0,0 +1,179 @@
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Cloud Engines PogoPlug Series 4";
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "uart0:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_eject>;
+ pinctrl-names = "default";
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_EJECTCD>;
+ label = "Eject Button";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+ health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio_wp: pmx-sdio-wp {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_eject: pmx-button-eject {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green: pmx-led-green {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_red: pmx-led-red {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+};
+
+&uart0 {
+ status = "okay";
+ current-speed = <115200>;
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ nr-ports = <1>;
+};
+
+&sdio {
+ status = "okay";
+ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+ pinctrl-names = "default";
+ cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+ /* 128 MiB of NAND flash */
+ chip-delay = <40>;
+ status = "okay";
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x00200000 0x300000>;
+ };
+
+ partition@500000 {
+ label = "uImage2";
+ reg = <0x00500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "failsafe";
+ reg = <0x00800000 0x800000>;
+ };
+
+ partition@1000000 {
+ label = "root";
+ reg = <0x01000000 0x7000000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
This adds a device tree for the CloudEngines PogoPlug series 4 NAS device. Inspired by out-of-tree boardfiles from ArchLinux by Kevin Mihelich. Cc: Moonman <moonman.ca@gmail.com> Cc: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Use <dt-bindings/input/linux-event-codes.h> - Specify default baud rate etc differently - Rename LEDs "pogoplugv4*" - Skip registering i2c0 as there is nothing on it --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts | 179 +++++++++++++++++++++++ 2 files changed, 180 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -- 2.4.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel