diff mbox series

[v2,07/11] qla2xxx: Fix losing target when it reappears during delete

Message ID 20220616053508.27186-8-njavali@marvell.com
State New
Headers show
Series qla2xxx bug fixes | expand

Commit Message

Nilesh Javali June 16, 2022, 5:35 a.m. UTC 
From: Arun Easi <aeasi@marvell.com>

FC target disappeared during port perturbation tests
due to a race that tramples target state.
Fix the issue by adding state checks before proceeding.

Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8b87fefda423..feca9e44b21c 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2714,17 +2714,24 @@  qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 	if (!fcport)
 		return;
 
-	/* Now that the rport has been deleted, set the fcport state to
-	   FCS_DEVICE_DEAD */
-	qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
+
+	/*
+	 * Now that the rport has been deleted, set the fcport state to
+	 * FCS_DEVICE_DEAD, if the fcport is still lost.
+	 */
+	if (fcport->scan_state != QLA_FCPORT_FOUND)
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
 
 	/*
 	 * Transport has effectively 'deleted' the rport, clear
 	 * all local references.
 	 */
 	spin_lock_irqsave(host->host_lock, flags);
-	fcport->rport = fcport->drport = NULL;
-	*((fc_port_t **)rport->dd_data) = NULL;
+	/* Confirm port has not reappeared before clearing pointers. */
+	if (rport->port_state != FC_PORTSTATE_ONLINE) {
+		fcport->rport = fcport->drport = NULL;
+		*((fc_port_t **)rport->dd_data) = NULL;
+	}
 	spin_unlock_irqrestore(host->host_lock, flags);
 
 	if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
@@ -2757,9 +2764,12 @@  qla2x00_terminate_rport_io(struct fc_rport *rport)
 	/*
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
+	 *
+	 * Attempt to cleanup only lost devices.
 	 */
 	if (fcport->loop_id != FC_NO_LOOP_ID) {
-		if (IS_FWI2_CAPABLE(fcport->vha->hw)) {
+		if (IS_FWI2_CAPABLE(fcport->vha->hw) &&
+		    fcport->scan_state != QLA_FCPORT_FOUND) {
 			if (fcport->loop_id != FC_NO_LOOP_ID)
 				fcport->logout_on_delete = 1;
 
@@ -2769,7 +2779,7 @@  qla2x00_terminate_rport_io(struct fc_rport *rport)
 				       __LINE__);
 				qlt_schedule_sess_for_deletion(fcport);
 			}
-		} else {
+		} else if (!IS_FWI2_CAPABLE(fcport->vha->hw)) {
 			qla2x00_port_logout(fcport->vha, fcport);
 		}
 	}