diff mbox series

[v3,6/8] iio: magnetometer: yas530: Rename functions and registers

Message ID f1a49262b124cbcdf4a258f65fd54ee389de3a29.1655509425.git.jahau@rocketmail.com
State Superseded
Headers show
Series [v3,1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed | expand

Commit Message

Jakob Hauser June 18, 2022, 12:13 a.m. UTC 
This is a preparation for adding YAS537 variant.

Rename functions used only by YAS530 & YAS532 from yas5xx to yas530_532.
Same for the registers.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/iio/magnetometer/yamaha-yas530.c | 106 ++++++++++++-----------
 1 file changed, 55 insertions(+), 51 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index c6f5f25793c4..98c8d365fab7 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -40,20 +40,22 @@ 
 
 #include <asm/unaligned.h>
 
-/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */
+/* Commonly used registers */
 #define YAS5XX_DEVICE_ID		0x80
-#define YAS5XX_ACTUATE_INIT_COIL	0x81
-#define YAS5XX_MEASURE			0x82
-#define YAS5XX_CONFIG			0x83
-#define YAS5XX_MEASURE_INTERVAL		0x84
-#define YAS5XX_OFFSET_X			0x85 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y1		0x86 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y2		0x87 /* [-31 .. 31] */
-#define YAS5XX_TEST1			0x88
-#define YAS5XX_TEST2			0x89
-#define YAS5XX_CAL			0x90
 #define YAS5XX_MEASURE_DATA		0xB0
 
+/* Registers used by YAS530 and YAS532 */
+#define YAS530_532_ACTUATE_INIT_COIL	0x81
+#define YAS530_532_MEASURE		0x82
+#define YAS530_532_CONFIG		0x83
+#define YAS530_532_MEASURE_INTERVAL	0x84
+#define YAS530_532_OFFSET_X		0x85 /* [-31 .. 31] */
+#define YAS530_532_OFFSET_Y1		0x86 /* [-31 .. 31] */
+#define YAS530_532_OFFSET_Y2		0x87 /* [-31 .. 31] */
+#define YAS530_532_TEST1		0x88
+#define YAS530_532_TEST2		0x89
+#define YAS530_532_CAL			0x90
+
 /* Bits in the YAS5xx config register */
 #define YAS5XX_CONFIG_INTON		BIT(0) /* Interrupt on? */
 #define YAS5XX_CONFIG_INTHACT		BIT(1) /* Interrupt active high? */
@@ -182,7 +184,7 @@  static u16 yas532_extract_axis(u8 *data)
 }
 
 /**
- * yas5xx_measure() - Make a measure from the hardware
+ * yas530_532_measure() - Make a measure from the hardware
  * @yas5xx: The device state
  * @t: the raw temperature measurement
  * @x: the raw x axis measurement
@@ -190,7 +192,8 @@  static u16 yas532_extract_axis(u8 *data)
  * @y2: the y2 axis measurement
  * @return: 0 on success or error code
  */
-static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+static int yas530_532_measure(struct yas5xx *yas5xx, u16 *t,
+			      u16 *x, u16 *y1, u16 *y2)
 {
 	unsigned int busy;
 	u8 data[8];
@@ -198,7 +201,7 @@  static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	u16 val;
 
 	mutex_lock(&yas5xx->lock);
-	ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, YAS5XX_MEASURE_START);
+	ret = regmap_write(yas5xx->map, YAS530_532_MEASURE, YAS5XX_MEASURE_START);
 	if (ret < 0)
 		goto out_unlock;
 
@@ -264,7 +267,7 @@  static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	return ret;
 }
 
-static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
+static s32 yas530_532_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 {
 	struct yas5xx_calibration *c = &yas5xx->calibration;
 	static const s32 yas532ac_coef[] = {
@@ -306,7 +309,7 @@  static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 }
 
 /**
- * yas5xx_get_measure() - Measure a sample of all axis and process
+ * yas530_532_get_measure() - Measure a sample of all axis and process
  * @yas5xx: The device state
  * @to: Temperature out
  * @xo: X axis out
@@ -314,7 +317,8 @@  static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
  * @zo: Z axis out
  * @return: 0 on success or error code
  */
-static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+static int yas530_532_get_measure(struct yas5xx *yas5xx, s32 *to,
+				  s32 *xo, s32 *yo, s32 *zo)
 {
 	struct yas5xx_calibration *c = &yas5xx->calibration;
 	u16 t_ref, t, x, y1, y2;
@@ -323,14 +327,14 @@  static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
 	int ret;
 
 	/* We first get raw data that needs to be translated to [x,y,z] */
-	ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+	ret = yas530_532_measure(yas5xx, &t, &x, &y1, &y2);
 	if (ret)
 		return ret;
 
 	/* Do some linearization if available */
-	sx = yas5xx_linearize(yas5xx, x, 0);
-	sy1 = yas5xx_linearize(yas5xx, y1, 1);
-	sy2 = yas5xx_linearize(yas5xx, y2, 2);
+	sx = yas530_532_linearize(yas5xx, x, 0);
+	sy1 = yas530_532_linearize(yas5xx, y1, 1);
+	sy2 = yas530_532_linearize(yas5xx, y2, 2);
 
 	/* Set the temperature reference value (unit: counts) */
 	switch (yas5xx->devid) {
@@ -602,11 +606,11 @@  static const struct regmap_config yas5xx_regmap_config = {
 };
 
 /**
- * yas53x_extract_calibration() - extracts the a2-a9 and k calibration
+ * yas530_532_extract_calibration() - extracts the a2-a9 and k calibration
  * @data: the bitfield to use
  * @c: the calibration to populate
  */
-static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c)
+static void yas530_532_extract_calibration(u8 *data, struct yas5xx_calibration *c)
 {
 	u64 val = get_unaligned_be64(data);
 
@@ -644,12 +648,12 @@  static int yas530_get_calibration_data(struct yas5xx *yas5xx)
 	int ret;
 
 	/* Dummy read, first read is ALWAYS wrong */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_532_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 
 	/* Actual calibration readout */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_532_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 	dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
@@ -661,7 +665,7 @@  static int yas530_get_calibration_data(struct yas5xx *yas5xx)
 	c->Cx = data[0] * 6 - 768;
 	c->Cy1 = data[1] * 6 - 768;
 	c->Cy2 = data[2] * 6 - 768;
-	yas53x_extract_calibration(&data[3], c);
+	yas530_532_extract_calibration(&data[3], c);
 
 	/*
 	 * Extract linearization:
@@ -692,11 +696,11 @@  static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	int ret;
 
 	/* Dummy read, first read is ALWAYS wrong */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_532_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 	/* Actual calibration readout */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_532_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 	dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
@@ -715,7 +719,7 @@  static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	c->Cx = data[0] * 10 - 1280;
 	c->Cy1 = data[1] * 10 - 1280;
 	c->Cy2 = data[2] * 10 - 1280;
-	yas53x_extract_calibration(&data[3], c);
+	yas530_532_extract_calibration(&data[3], c);
 	/*
 	 * Extract linearization:
 	 * Linearization layout in the 32 bits at byte 10:
@@ -738,7 +742,7 @@  static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	return 0;
 }
 
-static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
+static void yas530_532_dump_calibration(struct yas5xx *yas5xx)
 {
 	struct yas5xx_calibration *c = &yas5xx->calibration;
 
@@ -761,20 +765,20 @@  static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
 	dev_dbg(yas5xx->dev, "dck = %d\n", c->dck);
 }
 
-static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
+static int yas530_532_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
 {
 	int ret;
 
-	ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox);
+	ret = regmap_write(yas5xx->map, YAS530_532_OFFSET_X, ox);
 	if (ret)
 		return ret;
-	ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1);
+	ret = regmap_write(yas5xx->map, YAS530_532_OFFSET_Y1, oy1);
 	if (ret)
 		return ret;
-	return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2);
+	return regmap_write(yas5xx->map, YAS530_532_OFFSET_Y2, oy2);
 }
 
-static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
+static s8 yas530_532_adjust_offset(s8 old, int bit, u16 center, u16 measure)
 {
 	if (measure > center)
 		return old + BIT(bit);
@@ -783,7 +787,7 @@  static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
 	return old;
 }
 
-static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
+static int yas530_532_measure_offsets(struct yas5xx *yas5xx)
 {
 	int ret;
 	u16 center;
@@ -792,7 +796,7 @@  static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	int i;
 
 	/* Actuate the init coil and measure offsets */
-	ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0);
+	ret = regmap_write(yas5xx->map, YAS530_532_ACTUATE_INIT_COIL, 0);
 	if (ret)
 		return ret;
 
@@ -826,26 +830,26 @@  static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	oy2 = 0;
 
 	for (i = 4; i >= 0; i--) {
-		ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+		ret = yas530_532_set_offsets(yas5xx, ox, oy1, oy2);
 		if (ret)
 			return ret;
 
-		ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+		ret = yas530_532_measure(yas5xx, &t, &x, &y1, &y2);
 		if (ret)
 			return ret;
 		dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n",
 			5-i, x, y1, y2);
 
-		ox = yas5xx_adjust_offset(ox, i, center, x);
-		oy1 = yas5xx_adjust_offset(oy1, i, center, y1);
-		oy2 = yas5xx_adjust_offset(oy2, i, center, y2);
+		ox = yas530_532_adjust_offset(ox, i, center, x);
+		oy1 = yas530_532_adjust_offset(oy1, i, center, y1);
+		oy2 = yas530_532_adjust_offset(oy2, i, center, y2);
 	}
 
 	/* Needed for calibration algorithm */
 	yas5xx->hard_offsets[0] = ox;
 	yas5xx->hard_offsets[1] = oy1;
 	yas5xx->hard_offsets[2] = oy2;
-	ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+	ret = yas530_532_set_offsets(yas5xx, ox, oy1, oy2);
 	if (ret)
 		return ret;
 
@@ -854,27 +858,27 @@  static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	return 0;
 }
 
-static int yas5xx_power_on(struct yas5xx *yas5xx)
+static int yas530_532_power_on(struct yas5xx *yas5xx)
 {
 	unsigned int val;
 	int ret;
 
 	/* Zero the test registers */
-	ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0);
+	ret = regmap_write(yas5xx->map, YAS530_532_TEST1, 0);
 	if (ret)
 		return ret;
-	ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0);
+	ret = regmap_write(yas5xx->map, YAS530_532_TEST2, 0);
 	if (ret)
 		return ret;
 
 	/* Set up for no interrupts, calibrated clock divider */
 	val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck);
-	ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val);
+	ret = regmap_write(yas5xx->map, YAS530_532_CONFIG, val);
 	if (ret)
 		return ret;
 
 	/* Measure interval 0 (back-to-back?)  */
-	return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0);
+	return regmap_write(yas5xx->map, YAS530_532_MEASURE_INTERVAL, 0);
 }
 
 static int yas5xx_probe(struct i2c_client *i2c,
@@ -956,11 +960,11 @@  static int yas5xx_probe(struct i2c_client *i2c,
 		goto assert_reset;
 	}
 
-	yas5xx_dump_calibration(yas5xx);
-	ret = yas5xx_power_on(yas5xx);
+	yas530_532_dump_calibration(yas5xx);
+	ret = yas530_532_power_on(yas5xx);
 	if (ret)
 		goto assert_reset;
-	ret = yas5xx_meaure_offsets(yas5xx);
+	ret = yas530_532_measure_offsets(yas5xx);
 	if (ret)
 		goto assert_reset;