| Message ID | 20220618214009.2178567-7-aidanmacdonald.0x0@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for AXP192 PMIC | expand |
On Sat, 18 Jun 2022 22:39:59 +0100, Aidan MacDonald wrote: > The AXP192 PMIC is different enough from the PMICs supported by > the AXP20x GPIO driver to warrant a separate driver. The AXP192 > driver also supports interrupts and pinconf settings. > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > .../bindings/gpio/x-powers,axp192-gpio.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.example.dts:18.26-23.11: Warning (unit_address_vs_reg): /example-0/gpio@0: node has a unit name, but no reg or ranges property doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml new file mode 100644 index 000000000000..1e368cac9d3a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: X-Powers AXP192 GPIO Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +properties: + compatible: + const: x-powers,axp192-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: > + The first cell is the pin number and the second is the GPIO flags. + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-pins$": + $ref: /schemas/pinctrl/pinmux-node.yaml# + + properties: + pins: + items: + enum: + - GPIO0 + - GPIO1 + - GPIO2 + - GPIO3 + - GPIO4 + - N_RSTO + + function: + enum: + - output + - input + - ldo + - pwm + - adc + - low_output + - floating + - ext_chg_ctl + - ldo_status + +required: + - compatible + - "#gpio-cells" + - gpio-controller + - gpio-ranges + +additionalProperties: false + +examples: + - | + pinctrl0: gpio@0 { + compatible = "x-powers,axp192-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 0 6>; + };
The AXP192 PMIC is different enough from the PMICs supported by the AXP20x GPIO driver to warrant a separate driver. The AXP192 driver also supports interrupts and pinconf settings. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- .../bindings/gpio/x-powers,axp192-gpio.yaml | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml