diff mbox series

mmc: sdhci-acpi: remove unexpected word "the"

Message ID 20220621094459.80271-1-jiangjian@cdjrlc.com
State New
Headers show
Series mmc: sdhci-acpi: remove unexpected word "the" | expand

Commit Message

Jiang Jian June 21, 2022, 9:44 a.m. UTC
there is an unexpected word "the" in the comments that need to be removed

*       instead use the the SDR104 preset register.

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
---
 drivers/mmc/host/sdhci-acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Adrian Hunter June 22, 2022, 8:38 a.m. UTC | #1
On 21/06/22 12:44, Jiang Jian wrote:
> there is an unexpected word "the" in the comments that need to be removed
> 
> *       instead use the the SDR104 preset register.
> 
> Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-acpi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index c0350e9c03f3..93fe6e5a5f9f 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -648,7 +648,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
>  	 *       in reading a garbage value and using the wrong presets.
>  	 *
>  	 *       Since HS400 and HS200 presets must be identical, we could
> -	 *       instead use the the SDR104 preset register.
> +	 *       instead use the SDR104 preset register.
>  	 *
>  	 *    If the above issues are resolved we could remove this quirk for
>  	 *    firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index c0350e9c03f3..93fe6e5a5f9f 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -648,7 +648,7 @@  static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
 	 *       in reading a garbage value and using the wrong presets.
 	 *
 	 *       Since HS400 and HS200 presets must be identical, we could
-	 *       instead use the the SDR104 preset register.
+	 *       instead use the SDR104 preset register.
 	 *
 	 *    If the above issues are resolved we could remove this quirk for
 	 *    firmware that that has valid presets (i.e., SDR12 <= 12 MHz).