[v6,1/2] clk: qcom: Add support for SMD-RPM Clocks

diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
new file mode 100644
index 000000000000..91be034ea75b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -0,0 +1,36 @@ 
+Qualcomm RPM Clock Controller Binding
+------------------------------------------------
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+Required properties :
+- compatible : shall contain only one of the following. The generic
+               compatible "qcom,rpmcc" should be also included.
+
+			"qcom,rpmcc-msm8916", "qcom,rpmcc"
+
+- #clock-cells : shall contain 1
+
+Example:
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: qcom,rpmcc {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+			};
+		};
+	};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index b552eceec2be..5963d36f0c45 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -2,6 +2,9 @@  config QCOM_GDSC
 	bool
 	select PM_GENERIC_DOMAINS if PM
 
+config QCOM_RPMCC
+	bool
+
 config COMMON_CLK_QCOM
 	tristate "Support for Qualcomm's clock controllers"
 	depends on OF
@@ -9,6 +12,19 @@  config COMMON_CLK_QCOM
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
 
+config QCOM_CLK_SMD_RPM
+	tristate "RPM over SMD based Clock Controller"
+	depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
+	select QCOM_RPMCC
+	help
+	  The RPM (Resource Power Manager) is a dedicated hardware engine for
+	  managing the shared SoC resources in order to keep the lowest power
+	  profile. It communicates with other hardware subsystems via shared
+	  memory and accepts clock requests, aggregates the requests and turns
+	  the clocks on/off or scales them on demand.
+	  Say Y if you want to support the clocks exposed by the RPM on
+	  platforms such as apq8016, apq8084, msm8974 etc.
+
 config APQ_GCC_8084
 	tristate "APQ8084 Global Clock Controller"
 	select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index dc4280b85db1..5f4673b7b03a 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -25,3 +25,4 @@  obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
new file mode 100644
index 000000000000..f9eb5c616c95
--- /dev/null
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -0,0 +1,433 @@ 
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include "clk-smd-rpm.h"
+#include <dt-bindings/clock/qcom,rpmcc.h>
+
+#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
+
+static DEFINE_MUTEX(rpm_smd_clk_lock);
+
+static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
+				       unsigned long rate)
+{
+	struct clk_smd_rpm_req req = {
+		.key = cpu_to_le32(r->rpm_key),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
+	};
+
+	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+				  r->rpm_res_type, r->rpm_clk_id, &req,
+				  sizeof(req));
+}
+
+static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
+				      unsigned long rate)
+{
+	struct clk_smd_rpm_req req = {
+		.key = cpu_to_le32(r->rpm_key),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
+	};
+
+	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
+				  r->rpm_res_type, r->rpm_clk_id, &req,
+				  sizeof(req));
+}
+
+static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
+			    unsigned long *active, unsigned long *sleep)
+{
+	*active = rate;
+
+	/*
+	 * Active-only clocks don't care what the rate is during sleep. So,
+	 * they vote for zero.
+	 */
+	if (r->active_only)
+		*sleep = 0;
+	else
+		*sleep = *active;
+}
+
+static int clk_smd_rpm_prepare(struct clk_hw *hw)
+{
+	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+	struct clk_smd_rpm *peer = r->peer;
+	unsigned long this_rate = 0, this_sleep_rate = 0;
+	unsigned long peer_rate = 0, peer_sleep_rate = 0;
+	unsigned long active_rate, sleep_rate;
+	int ret = 0;
+
+	mutex_lock(&rpm_smd_clk_lock);
+
+	/* Don't send requests to the RPM if the rate has not been set. */
+	if (!r->rate)
+		goto out;
+
+	to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
+
+	/* Take peer clock's rate into account only if it's enabled. */
+	if (peer->enabled)
+		to_active_sleep(peer, peer->rate,
+				&peer_rate, &peer_sleep_rate);
+
+	active_rate = max(this_rate, peer_rate);
+
+	if (r->branch)
+		active_rate = !!active_rate;
+
+	ret = clk_smd_rpm_set_rate_active(r, active_rate);
+	if (ret)
+		goto out;
+
+	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
+	if (r->branch)
+		sleep_rate = !!sleep_rate;
+
+	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+	if (ret)
+		/* Undo the active set vote and restore it */
+		ret = clk_smd_rpm_set_rate_active(r, peer_rate);
+
+out:
+	if (!ret)
+		r->enabled = true;
+
+	mutex_unlock(&rpm_smd_clk_lock);
+
+	return ret;
+}
+
+static void clk_smd_rpm_unprepare(struct clk_hw *hw)
+{
+	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+	struct clk_smd_rpm *peer = r->peer;
+	unsigned long peer_rate = 0, peer_sleep_rate = 0;
+	unsigned long active_rate, sleep_rate;
+	int ret;
+
+	mutex_lock(&rpm_smd_clk_lock);
+
+	if (!r->rate)
+		goto out;
+
+	/* Take peer clock's rate into account only if it's enabled. */
+	if (peer->enabled)
+		to_active_sleep(peer, peer->rate, &peer_rate,
+				&peer_sleep_rate);
+
+	active_rate = r->branch ? !!peer_rate : peer_rate;
+	ret = clk_smd_rpm_set_rate_active(r, active_rate);
+	if (ret)
+		goto out;
+
+	sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
+	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+	if (ret)
+		goto out;
+
+	r->enabled = false;
+
+out:
+	mutex_unlock(&rpm_smd_clk_lock);
+}
+
+static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+	struct clk_smd_rpm *peer = r->peer;
+	unsigned long active_rate, sleep_rate;
+	unsigned long this_rate = 0, this_sleep_rate = 0;
+	unsigned long peer_rate = 0, peer_sleep_rate = 0;
+	int ret = 0;
+
+	mutex_lock(&rpm_smd_clk_lock);
+
+	if (!r->enabled)
+		goto out;
+
+	to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
+
+	/* Take peer clock's rate into account only if it's enabled. */
+	if (peer->enabled)
+		to_active_sleep(peer, peer->rate,
+				&peer_rate, &peer_sleep_rate);
+
+	active_rate = max(this_rate, peer_rate);
+	ret = clk_smd_rpm_set_rate_active(r, active_rate);
+	if (ret)
+		goto out;
+
+	sleep_rate = max(this_sleep_rate, peer_sleep_rate);
+	ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+	if (ret)
+		goto out;
+
+	r->rate = rate;
+
+out:
+	mutex_unlock(&rpm_smd_clk_lock);
+
+	return ret;
+}
+
+static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	/*
+	 * RPM handles rate rounding and we don't have a way to
+	 * know what the rate will be, so just return whatever
+	 * rate is requested.
+	 */
+	return rate;
+}
+
+static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+
+	/*
+	 * RPM handles rate rounding and we don't have a way to
+	 * know what the rate will be, so just return whatever
+	 * rate was set.
+	 */
+	return r->rate;
+}
+
+static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
+{
+	int ret;
+	struct clk_smd_rpm_req req = {
+		.key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(1),
+	};
+
+	ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
+				 QCOM_SMD_RPM_MISC_CLK,
+				 QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
+	if (ret) {
+		pr_err("RPM clock scaling (sleep set) not enabled!\n");
+		return ret;
+	}
+
+	ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+				 QCOM_SMD_RPM_MISC_CLK,
+				 QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
+	if (ret) {
+		pr_err("RPM clock scaling (active set) not enabled!\n");
+		return ret;
+	}
+
+	pr_debug("%s: RPM clock scaling is enabled\n", __func__);
+	return 0;
+}
+
+const struct clk_ops clk_smd_rpm_ops = {
+	.prepare	= clk_smd_rpm_prepare,
+	.unprepare	= clk_smd_rpm_unprepare,
+	.set_rate	= clk_smd_rpm_set_rate,
+	.round_rate	= clk_smd_rpm_round_rate,
+	.recalc_rate	= clk_smd_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_smd_rpm_ops);
+
+const struct clk_ops clk_smd_rpm_branch_ops = {
+	.prepare	= clk_smd_rpm_prepare,
+	.unprepare	= clk_smd_rpm_unprepare,
+	.round_rate	= clk_smd_rpm_round_rate,
+	.recalc_rate	= clk_smd_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_smd_rpm_branch_ops);
+
+struct rpm_cc {
+	struct qcom_rpm *rpm;
+	struct clk_onecell_data data;
+	struct clk *clks[];
+};
+
+struct rpm_smd_clk_desc {
+	struct clk_smd_rpm **clks;
+	size_t num_clks;
+};
+
+/* msm8916 */
+DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM_BRANCH(msm8916, xo, xo_a, QCOM_SMD_RPM_MISC_CLK, 0, 19200000);
+DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
+
+static struct clk_smd_rpm *msm8916_clks[] = {
+	[RPM_XO_CLK_SRC]	= &msm8916_xo,
+	[RPM_XO_A_CLK_SRC]	= &msm8916_xo_a,
+	[RPM_PCNOC_CLK]		= &msm8916_pcnoc_clk,
+	[RPM_PCNOC_A_CLK]	= &msm8916_pcnoc_a_clk,
+	[RPM_SNOC_CLK]		= &msm8916_snoc_clk,
+	[RPM_SNOC_A_CLK]	= &msm8916_snoc_a_clk,
+	[RPM_BIMC_CLK]		= &msm8916_bimc_clk,
+	[RPM_BIMC_A_CLK]	= &msm8916_bimc_a_clk,
+	[RPM_QDSS_CLK]		= &msm8916_qdss_clk,
+	[RPM_QDSS_A_CLK]	= &msm8916_qdss_a_clk,
+	[RPM_BB_CLK1]		= &msm8916_bb_clk1,
+	[RPM_BB_CLK1_A]		= &msm8916_bb_clk1_a,
+	[RPM_BB_CLK2]		= &msm8916_bb_clk2,
+	[RPM_BB_CLK2_A]		= &msm8916_bb_clk2_a,
+	[RPM_RF_CLK1]		= &msm8916_rf_clk1,
+	[RPM_RF_CLK1_A]		= &msm8916_rf_clk1_a,
+	[RPM_RF_CLK2]		= &msm8916_rf_clk2,
+	[RPM_RF_CLK2_A]		= &msm8916_rf_clk2_a,
+	[RPM_BB_CLK1_PIN]	= &msm8916_bb_clk1_pin,
+	[RPM_BB_CLK1_A_PIN]	= &msm8916_bb_clk1_a_pin,
+	[RPM_BB_CLK2_PIN]	= &msm8916_bb_clk2_pin,
+	[RPM_BB_CLK2_A_PIN]	= &msm8916_bb_clk2_a_pin,
+	[RPM_RF_CLK1_PIN]	= &msm8916_rf_clk1_pin,
+	[RPM_RF_CLK1_A_PIN]	= &msm8916_rf_clk1_a_pin,
+	[RPM_RF_CLK2_PIN]	= &msm8916_rf_clk2_pin,
+	[RPM_RF_CLK2_A_PIN]	= &msm8916_rf_clk2_a_pin,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
+	.clks = msm8916_clks,
+	.num_clks = ARRAY_SIZE(msm8916_clks),
+};
+
+static const struct of_device_id rpm_smd_clk_match_table[] = {
+	{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
+
+static int rpm_smd_clk_probe(struct platform_device *pdev)
+{
+	struct clk **clks;
+	struct clk *clk;
+	struct rpm_cc *rcc;
+	struct clk_onecell_data *data;
+	int ret;
+	size_t num_clks, i;
+	struct qcom_smd_rpm *rpm;
+	struct clk_smd_rpm **rpm_smd_clks;
+	const struct rpm_smd_clk_desc *desc;
+
+	rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!rpm) {
+		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	rpm_smd_clks = desc->clks;
+	num_clks = desc->num_clks;
+
+	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
+			   GFP_KERNEL);
+	if (!rcc)
+		return -ENOMEM;
+
+	clks = rcc->clks;
+	data = &rcc->data;
+	data->clks = clks;
+	data->clk_num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		if (!rpm_smd_clks[i]) {
+			clks[i] = ERR_PTR(-ENOENT);
+			continue;
+		}
+
+		rpm_smd_clks[i]->rpm = rpm;
+		clk = devm_clk_register(&pdev->dev, &rpm_smd_clks[i]->hw);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			goto err;
+		}
+
+		clks[i] = clk;
+	}
+
+	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+				  data);
+	if (ret)
+		goto err;
+
+	ret = clk_smd_rpm_enable_scaling(rpm);
+	if (ret) {
+		of_clk_del_provider(pdev->dev.of_node);
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
+	return ret;
+}
+
+static int rpm_smd_clk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static struct platform_driver rpm_smd_clk_driver = {
+	.driver = {
+		.name = "qcom-clk-smd-rpm",
+		.of_match_table = rpm_smd_clk_match_table,
+	},
+	.probe = rpm_smd_clk_probe,
+	.remove = rpm_smd_clk_remove,
+};
+
+static int __init rpm_smd_clk_init(void)
+{
+	return platform_driver_register(&rpm_smd_clk_driver);
+}
+core_initcall(rpm_smd_clk_init);
+
+static void __exit rpm_smd_clk_exit(void)
+{
+	platform_driver_unregister(&rpm_smd_clk_driver);
+}
+module_exit(rpm_smd_clk_exit);
+
+MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-clk-smd-rpm");
diff --git a/drivers/clk/qcom/clk-smd-rpm.h b/drivers/clk/qcom/clk-smd-rpm.h
new file mode 100644
index 000000000000..7ac58294d368
--- /dev/null
+++ b/drivers/clk/qcom/clk-smd-rpm.h
@@ -0,0 +1,142 @@ 
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_SMD_RPM_H__
+#define __QCOM_CLK_SMD_RPM_H__
+
+#include <linux/clk-provider.h>
+
+#define QCOM_RPM_KEY_SOFTWARE_ENABLE			0x6e657773
+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY	0x62636370
+#define QCOM_RPM_SMD_KEY_RATE				0x007a484b
+#define QCOM_RPM_SMD_KEY_ENABLE				0x62616e45
+#define QCOM_RPM_SMD_KEY_STATE				0x54415453
+#define QCOM_RPM_SCALING_ENABLE_ID			0x2
+
+struct qcom_smd_rpm;
+
+struct clk_smd_rpm {
+	const int rpm_res_type;
+	const int rpm_key;
+	const int rpm_clk_id;
+	const int rpm_status_id;
+	const bool active_only;
+	bool enabled;
+	bool branch;
+	struct clk_smd_rpm *peer;
+	struct clk_hw hw;
+	unsigned long rate;
+	struct qcom_smd_rpm *rpm;
+};
+
+struct clk_smd_rpm_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+extern const struct clk_ops clk_smd_rpm_ops;
+extern const struct clk_ops clk_smd_rpm_branch_ops;
+
+#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id,  \
+			     key)					      \
+	static struct clk_smd_rpm _platform##_##_active;		      \
+	static struct clk_smd_rpm _platform##_##_name = {		      \
+		.rpm_res_type = (type),					      \
+		.rpm_clk_id = (r_id),					      \
+		.rpm_status_id = (stat_id),				      \
+		.rpm_key = (key),					      \
+		.peer = &_platform##_##_active,				      \
+		.rate = INT_MAX,					      \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_smd_rpm_ops,			      \
+			.name = #_name,					      \
+			.parent_names = (const char *[]){ "xo_board" },       \
+			.num_parents = 1,				      \
+		},							      \
+	};								      \
+	static struct clk_smd_rpm _platform##_##_active = {		      \
+		.rpm_res_type = (type),					      \
+		.rpm_clk_id = (r_id),					      \
+		.rpm_status_id = (stat_id),				      \
+		.rpm_key = (key),					      \
+		.peer = &_platform##_##_name,				      \
+		.active_only = true,					      \
+		.rate = INT_MAX,					      \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_smd_rpm_ops,			      \
+			.name = #_active,				      \
+			.parent_names = (const char *[]){ "xo_board" },	      \
+			.num_parents = 1,				      \
+		},							      \
+	}
+
+#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id,    \
+				    stat_id, r, key)			      \
+	static struct clk_smd_rpm _platform##_##_active;		      \
+	static struct clk_smd_rpm _platform##_##_name = {		      \
+		.rpm_res_type = (type),					      \
+		.rpm_clk_id = (r_id),					      \
+		.rpm_status_id = (stat_id),				      \
+		.rpm_key = (key),					      \
+		.peer = &_platform##_##_active,				      \
+		.branch = true,						      \
+		.rate = (r),						      \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_smd_rpm_branch_ops,			      \
+			.name = #_name,					      \
+			.parent_names = (const char *[]){ "xo_board" },	      \
+			.num_parents = 1,				      \
+		},							      \
+	};								      \
+	static struct clk_smd_rpm _platform##_##_active = {		      \
+		.rpm_res_type = (type),					      \
+		.rpm_clk_id = (r_id),					      \
+		.rpm_status_id = (stat_id),				      \
+		.rpm_key = (key),					      \
+		.peer = &_platform##_##_name,				      \
+		.active_only = true,					      \
+		.branch = true,						      \
+		.rate = (r),						      \
+		.hw.init = &(struct clk_init_data){			      \
+			.ops = &clk_smd_rpm_branch_ops,			      \
+			.name = #_active,				      \
+			.parent_names = (const char *[]){ "xo_board" },	      \
+			.num_parents = 1,				      \
+		},							      \
+	}
+
+#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id)	      \
+		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
+		0, QCOM_RPM_SMD_KEY_RATE)
+
+#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r)   \
+		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type,  \
+		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
+
+#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id)	      \
+		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
+		0, QCOM_RPM_SMD_KEY_STATE)
+
+#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id)	      \
+		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
+		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
+		QCOM_RPM_KEY_SOFTWARE_ENABLE)
+
+#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
+		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
+		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
+		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
new file mode 100644
index 000000000000..7800ab465d48
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -0,0 +1,45 @@ 
+/*
+ * Copyright 2015 Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
+#define _DT_BINDINGS_CLK_MSM_RPMCC_H
+
+/* msm8916 */
+#define RPM_XO_CLK_SRC				0
+#define RPM_XO_A_CLK_SRC			1
+#define RPM_PCNOC_CLK				2
+#define RPM_PCNOC_A_CLK				3
+#define RPM_SNOC_CLK				4
+#define RPM_SNOC_A_CLK				5
+#define RPM_BIMC_CLK				6
+#define RPM_BIMC_A_CLK				7
+#define RPM_QDSS_CLK				8
+#define RPM_QDSS_A_CLK				9
+#define RPM_BB_CLK1				10
+#define RPM_BB_CLK1_A				11
+#define RPM_BB_CLK2				12
+#define RPM_BB_CLK2_A				13
+#define RPM_RF_CLK1				14
+#define RPM_RF_CLK1_A				15
+#define RPM_RF_CLK2				16
+#define RPM_RF_CLK2_A				17
+#define RPM_BB_CLK1_PIN				18
+#define RPM_BB_CLK1_A_PIN			19
+#define RPM_BB_CLK2_PIN				20
+#define RPM_BB_CLK2_A_PIN			21
+#define RPM_RF_CLK1_PIN				22
+#define RPM_RF_CLK1_A_PIN			23
+#define RPM_RF_CLK2_PIN				24
+#define RPM_RF_CLK2_A_PIN			25
+
+#endif