diff mbox series

[v3,09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support

Message ID 20220623115631.22209-10-peterwu.pub@gmail.com
State New
Headers show
Series Add Mediatek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu June 23, 2022, 11:56 a.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

Add mt6370 DisplayBias and VibLDO support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---

v3
- Refine Kconfig help text
---
 drivers/regulator/Kconfig            |   8 +
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/mt6370-regulator.c | 388 +++++++++++++++++++++++++++++++++++
 3 files changed, 397 insertions(+)
 create mode 100644 drivers/regulator/mt6370-regulator.c

Comments

Andy Shevchenko June 23, 2022, 6:18 p.m. UTC | #1
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
>
> From: ChiYuan Huang <cy_huang@richtek.com>
>
> Add mt6370 DisplayBias and VibLDO support.

...

> +#include <linux/bits.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>

> +#include <linux/of.h>

Any users of this? (See below)

> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>

...

> +#define MT6370_LDO_MINUV       1600000
> +#define MT6370_LDO_STPUV       200000
> +#define MT6370_LDO_N_VOLT      13
> +#define MT6370_DBVBOOST_MINUV  4000000
> +#define MT6370_DBVBOOST_STPUV  50000
> +#define MT6370_DBVBOOST_N_VOLT 45
> +#define MT6370_DBVOUT_MINUV    4000000
> +#define MT6370_DBVOUT_STPUV    50000
> +#define MT6370_DBVOUT_N_VOLT   41

If UV is a unit suffix, make it _UV.

...

> +               .of_match = of_match_ptr("dsvbst"),

Would it even be called / used if CONFIG_OF=n?

...

> +               .regulators_node = of_match_ptr("regulators"),

Ditto.

...

> +       for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
> +               irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
> +
> +               rdev = priv->rdev[mt6370_irqs[i].rid];
> +
> +               ret = devm_request_threaded_irq(priv->dev, irq, NULL,
> +                                               mt6370_irqs[i].handler, 0,
> +                                               mt6370_irqs[i].name, rdev);
> +               if (ret) {

> +                       dev_err(priv->dev,
> +                               "Failed to register (%d) interrupt\n", i);
> +                       return ret;

return dev_err_probe(...); ?

> +               }
> +       }

...

> +       for (i = 0; i < MT6370_MAX_IDX; i++) {
> +               rdev = devm_regulator_register(priv->dev,
> +                                              mt6370_regulator_descs + i,
> +                                              &cfg);
> +               if (IS_ERR(rdev)) {

> +                       dev_err(priv->dev,
> +                               "Failed to register (%d) regulator\n", i);
> +                       return PTR_ERR(rdev);

return dev_err_probe(...); ?

> +               }
> +
> +               priv->rdev[i] = rdev;
> +       }

...

> +       if (!priv->regmap) {
> +               dev_err(&pdev->dev, "Failed to init regmap\n");
> +               return -ENODEV;
> +       }

return dev_err_probe(...);
ChiaEn Wu June 24, 2022, 10:32 a.m. UTC | #2
Hi Andy,

Thanks for your helpful comments!

Andy Shevchenko <andy.shevchenko@gmail.com> 於 2022年6月24日 週五 凌晨2:19寫道:
>
> On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> >
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > Add mt6370 DisplayBias and VibLDO support.
>
> ...
>
> > +#include <linux/bits.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
>
> > +#include <linux/of.h>
>
> Any users of this? (See below)
>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +#include <linux/regulator/machine.h>
>
> ...
>
> > +#define MT6370_LDO_MINUV       1600000
> > +#define MT6370_LDO_STPUV       200000
> > +#define MT6370_LDO_N_VOLT      13
> > +#define MT6370_DBVBOOST_MINUV  4000000
> > +#define MT6370_DBVBOOST_STPUV  50000
> > +#define MT6370_DBVBOOST_N_VOLT 45
> > +#define MT6370_DBVOUT_MINUV    4000000
> > +#define MT6370_DBVOUT_STPUV    50000
> > +#define MT6370_DBVOUT_N_VOLT   41
>
> If UV is a unit suffix, make it _UV.
>
> ...
>
> > +               .of_match = of_match_ptr("dsvbst"),
>
> Would it even be called / used if CONFIG_OF=n?

We got a notification from Mark telling us that this patch has been
applied to git.
( https://lore.kernel.org/linux-arm-kernel/165599931844.321775.8085559092337130067.b4-ty@kernel.org/
)
So, should we need to make any other changes in the next submission?

>
> ...
>
> > +               .regulators_node = of_match_ptr("regulators"),
>
> Ditto.
>
> ...
>
> > +       for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
> > +               irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
> > +
> > +               rdev = priv->rdev[mt6370_irqs[i].rid];
> > +
> > +               ret = devm_request_threaded_irq(priv->dev, irq, NULL,
> > +                                               mt6370_irqs[i].handler, 0,
> > +                                               mt6370_irqs[i].name, rdev);
> > +               if (ret) {
>
> > +                       dev_err(priv->dev,
> > +                               "Failed to register (%d) interrupt\n", i);
> > +                       return ret;
>
> return dev_err_probe(...); ?
>
> > +               }
> > +       }
>
> ...
>
> > +       for (i = 0; i < MT6370_MAX_IDX; i++) {
> > +               rdev = devm_regulator_register(priv->dev,
> > +                                              mt6370_regulator_descs + i,
> > +                                              &cfg);
> > +               if (IS_ERR(rdev)) {
>
> > +                       dev_err(priv->dev,
> > +                               "Failed to register (%d) regulator\n", i);
> > +                       return PTR_ERR(rdev);
>
> return dev_err_probe(...); ?
>
> > +               }
> > +
> > +               priv->rdev[i] = rdev;
> > +       }
>
> ...
>
> > +       if (!priv->regmap) {
> > +               dev_err(&pdev->dev, "Failed to init regmap\n");
> > +               return -ENODEV;
> > +       }
>
> return dev_err_probe(...);
>
> --
> With Best Regards,
> Andy Shevchenko

Best regards,
ChiaEn Wu
Andy Shevchenko June 28, 2022, 11:54 a.m. UTC | #3
On Fri, Jun 24, 2022 at 12:33 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> Andy Shevchenko <andy.shevchenko@gmail.com> 於 2022年6月24日 週五 凌晨2:19寫道:
> > On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:

...

> We got a notification from Mark telling us that this patch has been
> applied to git.
> ( https://lore.kernel.org/linux-arm-kernel/165599931844.321775.8085559092337130067.b4-ty@kernel.org/
> )
> So, should we need to make any other changes in the next submission?

You may do the followup(s) to address all or some of the comments
depending on the case (e.g. good to clean up code with dev_err_probe()
use).
diff mbox series

Patch

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index cbe0f96..736f654a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -804,6 +804,14 @@  config REGULATOR_MT6360
 	  2-channel buck with Thermal Shutdown and Overload Protection
 	  6-channel High PSRR and Low Dropout LDO.
 
+config REGULATOR_MT6370
+	tristate "MT6370 SubPMIC Regulator"
+	depends on MFD_MT6370
+	help
+	  Say Y here to enable MT6370 regulator support.
+	  This driver supports the control for DisplayBias voltages and one
+	  general purpose LDO which is commonly used to drive the vibrator.
+
 config REGULATOR_MT6380
 	tristate "MediaTek MT6380 PMIC"
 	depends on MTK_PMIC_WRAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 8d3ee8b..f1cbff2 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -97,6 +97,7 @@  obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
+obj-$(CONFIG_REGULATOR_MT6370) += mt6370-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
diff --git a/drivers/regulator/mt6370-regulator.c b/drivers/regulator/mt6370-regulator.c
new file mode 100644
index 0000000..bc356b4
--- /dev/null
+++ b/drivers/regulator/mt6370-regulator.c
@@ -0,0 +1,388 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+enum {
+	MT6370_IDX_DSVBOOST = 0,
+	MT6370_IDX_DSVPOS,
+	MT6370_IDX_DSVNEG,
+	MT6370_IDX_VIBLDO,
+	MT6370_MAX_IDX
+};
+
+#define MT6370_REG_LDO_CFG	0x180
+#define MT6370_REG_LDO_VOUT	0x181
+#define MT6370_REG_DB_CTRL1	0x1B0
+#define MT6370_REG_DB_CTRL2	0x1B1
+#define MT6370_REG_DB_VBST	0x1B2
+#define MT6370_REG_DB_VPOS	0x1B3
+#define MT6370_REG_DB_VNEG	0x1B4
+#define MT6370_REG_LDO_STAT	0x1DC
+#define MT6370_REG_DB_STAT	0x1DF
+
+#define MT6370_LDOOMS_MASK	BIT(7)
+#define MT6370_LDOEN_MASK	BIT(7)
+#define MT6370_LDOVOUT_MASK	GENMASK(3, 0)
+#define MT6370_DBPERD_MASK	(BIT(7) | BIT(4))
+#define MT6370_DBEXTEN_MASK	BIT(0)
+#define MT6370_DBVPOSEN_MASK	BIT(6)
+#define MT6370_DBVPOSDISG_MASK	BIT(5)
+#define MT6370_DBVNEGEN_MASK	BIT(3)
+#define MT6370_DBVNEGDISG_MASK	BIT(2)
+#define MT6370_DBALLON_MASK	(MT6370_DBVPOSEN_MASK | MT6370_DBVNEGEN_MASK)
+#define MT6370_DBSLEW_MASK	GENMASK(7, 6)
+#define MT6370_DBVOUT_MASK	GENMASK(5, 0)
+#define MT6370_LDOOC_EVT_MASK	BIT(7)
+#define MT6370_POSSCP_EVT_MASK	BIT(7)
+#define MT6370_NEGSCP_EVT_MASK	BIT(6)
+#define MT6370_BSTOCP_EVT_MASK	BIT(5)
+#define MT6370_POSOCP_EVT_MASK	BIT(4)
+#define MT6370_NEGOCP_EVT_MASK	BIT(3)
+
+#define MT6370_LDO_MINUV	1600000
+#define MT6370_LDO_STPUV	200000
+#define MT6370_LDO_N_VOLT	13
+#define MT6370_DBVBOOST_MINUV	4000000
+#define MT6370_DBVBOOST_STPUV	50000
+#define MT6370_DBVBOOST_N_VOLT	45
+#define MT6370_DBVOUT_MINUV	4000000
+#define MT6370_DBVOUT_STPUV	50000
+#define MT6370_DBVOUT_N_VOLT	41
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regulator_dev *rdev[MT6370_MAX_IDX];
+	bool use_external_ctrl;
+};
+
+static const unsigned int mt6370_vpos_ramp_tbl[] = { 8540, 5840, 4830, 3000 };
+static const unsigned int mt6370_vneg_ramp_tbl[] = { 10090, 6310, 5050, 3150 };
+
+static int mt6370_get_error_flags(struct regulator_dev *rdev,
+				  unsigned int *flags)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int stat_reg, stat, rpt_flags = 0;
+	int rid = rdev_get_id(rdev), ret;
+
+	if (rid == MT6370_IDX_VIBLDO)
+		stat_reg = MT6370_REG_LDO_STAT;
+	else
+		stat_reg = MT6370_REG_DB_STAT;
+
+	ret = regmap_read(regmap, stat_reg, &stat);
+	if (ret)
+		return ret;
+
+	switch (rid) {
+	case MT6370_IDX_DSVBOOST:
+		if (stat & MT6370_BSTOCP_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+		break;
+	case MT6370_IDX_DSVPOS:
+		if (stat & MT6370_POSSCP_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+		if (stat & MT6370_POSOCP_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+		break;
+	case MT6370_IDX_DSVNEG:
+		if (stat & MT6370_NEGSCP_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+		if (stat & MT6370_NEGOCP_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+		break;
+	default:
+		if (stat & MT6370_LDOOC_EVT_MASK)
+			rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+		break;
+	}
+
+	*flags = rpt_flags;
+	return 0;
+}
+
+static const struct regulator_ops mt6370_dbvboost_ops = {
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_dbvout_ops = {
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
+	.get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_ldo_ops = {
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.get_error_flags = mt6370_get_error_flags,
+};
+
+static int mt6370_of_parse_cb(struct device_node *np,
+			      const struct regulator_desc *desc,
+			      struct regulator_config *config)
+{
+	struct mt6370_priv *priv = config->driver_data;
+	struct gpio_desc *enable_gpio;
+	int ret;
+
+	enable_gpio = gpiod_get_from_of_node(np, "enable", 0, GPIOD_OUT_HIGH |
+					     GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+					     desc->name);
+	if (IS_ERR(enable_gpio)) {
+		config->ena_gpiod = NULL;
+		return 0;
+	}
+
+	/*
+	 * RG control by default
+	 * Only if all are using external pin, change all by external control
+	 */
+	if (priv->use_external_ctrl) {
+		ret = regmap_update_bits(priv->regmap, MT6370_REG_DB_CTRL1,
+					 MT6370_DBEXTEN_MASK,
+					 MT6370_DBEXTEN_MASK);
+		if (ret)
+			return ret;
+	}
+
+	config->ena_gpiod = enable_gpio;
+	priv->use_external_ctrl = true;
+	return 0;
+}
+
+static const struct regulator_desc mt6370_regulator_descs[] = {
+	{
+		.name = "mt6370-dsv-vbst",
+		.of_match = of_match_ptr("dsvbst"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = MT6370_IDX_DSVBOOST,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.ops = &mt6370_dbvboost_ops,
+		.min_uV = MT6370_DBVBOOST_MINUV,
+		.uV_step = MT6370_DBVBOOST_STPUV,
+		.n_voltages = MT6370_DBVBOOST_N_VOLT,
+		.vsel_reg = MT6370_REG_DB_VBST,
+		.vsel_mask = MT6370_DBVOUT_MASK,
+		.bypass_reg = MT6370_REG_DB_CTRL1,
+		.bypass_mask = MT6370_DBPERD_MASK,
+		.bypass_val_on = MT6370_DBPERD_MASK,
+	},
+	{
+		.name = "mt6370-dsv-vpos",
+		.of_match = of_match_ptr("dsvpos"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = MT6370_IDX_DSVPOS,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.of_parse_cb = mt6370_of_parse_cb,
+		.ops = &mt6370_dbvout_ops,
+		.min_uV = MT6370_DBVOUT_MINUV,
+		.uV_step = MT6370_DBVOUT_STPUV,
+		.n_voltages = MT6370_DBVOUT_N_VOLT,
+		.vsel_reg = MT6370_REG_DB_VPOS,
+		.vsel_mask = MT6370_DBVOUT_MASK,
+		.enable_reg = MT6370_REG_DB_CTRL2,
+		.enable_mask = MT6370_DBVPOSEN_MASK,
+		.ramp_reg = MT6370_REG_DB_VPOS,
+		.ramp_mask = MT6370_DBSLEW_MASK,
+		.ramp_delay_table = mt6370_vpos_ramp_tbl,
+		.n_ramp_values = ARRAY_SIZE(mt6370_vpos_ramp_tbl),
+		.active_discharge_reg = MT6370_REG_DB_CTRL2,
+		.active_discharge_mask = MT6370_DBVPOSDISG_MASK,
+		.active_discharge_on = MT6370_DBVPOSDISG_MASK,
+	},
+	{
+		.name = "mt6370-dsv-vneg",
+		.of_match = of_match_ptr("dsvneg"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = MT6370_IDX_DSVNEG,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.of_parse_cb = mt6370_of_parse_cb,
+		.ops = &mt6370_dbvout_ops,
+		.min_uV = MT6370_DBVOUT_MINUV,
+		.uV_step = MT6370_DBVOUT_STPUV,
+		.n_voltages = MT6370_DBVOUT_N_VOLT,
+		.vsel_reg = MT6370_REG_DB_VNEG,
+		.vsel_mask = MT6370_DBVOUT_MASK,
+		.enable_reg = MT6370_REG_DB_CTRL2,
+		.enable_mask = MT6370_DBVNEGEN_MASK,
+		.ramp_reg = MT6370_REG_DB_VNEG,
+		.ramp_mask = MT6370_DBSLEW_MASK,
+		.ramp_delay_table = mt6370_vneg_ramp_tbl,
+		.n_ramp_values = ARRAY_SIZE(mt6370_vneg_ramp_tbl),
+		.active_discharge_reg = MT6370_REG_DB_CTRL2,
+		.active_discharge_mask = MT6370_DBVNEGDISG_MASK,
+		.active_discharge_on = MT6370_DBVNEGDISG_MASK,
+	},
+	{
+		.name = "mt6370-vib-ldo",
+		.of_match = of_match_ptr("vibldo"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = MT6370_IDX_VIBLDO,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.ops = &mt6370_ldo_ops,
+		.min_uV = MT6370_LDO_MINUV,
+		.uV_step = MT6370_LDO_STPUV,
+		.n_voltages = MT6370_LDO_N_VOLT,
+		.vsel_reg = MT6370_REG_LDO_VOUT,
+		.vsel_mask = MT6370_LDOVOUT_MASK,
+		.enable_reg = MT6370_REG_LDO_VOUT,
+		.enable_mask = MT6370_LDOEN_MASK,
+		.active_discharge_reg = MT6370_REG_LDO_CFG,
+		.active_discharge_mask = MT6370_LDOOMS_MASK,
+		.active_discharge_on = MT6370_LDOOMS_MASK,
+	}
+};
+
+static irqreturn_t mt6370_scp_handler(int irq, void *data)
+{
+	struct regulator_dev *rdev = data;
+
+	regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE,
+				      NULL);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_ocp_handler(int irq, void *data)
+{
+	struct regulator_dev *rdev = data;
+
+	regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_CURRENT, NULL);
+	return IRQ_HANDLED;
+}
+
+static int mt6370_regulator_irq_register(struct mt6370_priv *priv)
+{
+	struct platform_device *pdev = to_platform_device(priv->dev);
+	static const struct {
+		const char *name;
+		int rid;
+		irq_handler_t handler;
+	} mt6370_irqs[] = {
+		{ "db_vpos_scp", MT6370_IDX_DSVPOS, mt6370_scp_handler },
+		{ "db_vneg_scp", MT6370_IDX_DSVNEG, mt6370_scp_handler },
+		{ "db_vbst_ocp", MT6370_IDX_DSVBOOST, mt6370_ocp_handler },
+		{ "db_vpos_ocp", MT6370_IDX_DSVPOS,  mt6370_ocp_handler },
+		{ "db_vneg_ocp", MT6370_IDX_DSVNEG, mt6370_ocp_handler },
+		{ "ldo_oc", MT6370_IDX_VIBLDO, mt6370_ocp_handler }
+	};
+	struct regulator_dev *rdev;
+	int i, irq, ret;
+
+	for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
+		irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
+
+		rdev = priv->rdev[mt6370_irqs[i].rid];
+
+		ret = devm_request_threaded_irq(priv->dev, irq, NULL,
+						mt6370_irqs[i].handler, 0,
+						mt6370_irqs[i].name, rdev);
+		if (ret) {
+			dev_err(priv->dev,
+				"Failed to register (%d) interrupt\n", i);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int mt6370_regualtor_register(struct mt6370_priv *priv)
+{
+	struct regulator_dev *rdev;
+	struct regulator_config cfg = {};
+	struct device *parent = priv->dev->parent;
+	int i;
+
+	cfg.dev = parent;
+	cfg.driver_data = priv;
+
+	for (i = 0; i < MT6370_MAX_IDX; i++) {
+		rdev = devm_regulator_register(priv->dev,
+					       mt6370_regulator_descs + i,
+					       &cfg);
+		if (IS_ERR(rdev)) {
+			dev_err(priv->dev,
+				"Failed to register (%d) regulator\n", i);
+			return PTR_ERR(rdev);
+		}
+
+		priv->rdev[i] = rdev;
+	}
+
+	return 0;
+}
+
+static int mt6370_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap) {
+		dev_err(&pdev->dev, "Failed to init regmap\n");
+		return -ENODEV;
+	}
+
+	ret = mt6370_regualtor_register(priv);
+	if (ret)
+		return ret;
+
+	return mt6370_regulator_irq_register(priv);
+}
+
+static const struct platform_device_id mt6370_devid_table[] = {
+	{ "mt6370-regulator", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mt6370_devid_table);
+
+static struct platform_driver mt6370_regulator_driver = {
+	.driver = {
+		.name = "mt6370-regulator",
+	},
+	.id_table = mt6370_devid_table,
+	.probe = mt6370_regulator_probe,
+};
+module_platform_driver(mt6370_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Mediatek MT6370 Regulator Driver");
+MODULE_LICENSE("GPL v2");