| Message ID | 20220623143115.3185297-12-xavier.roumegue@oss.nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i.MX8MP DW100 dewarper driver | expand |
Hi Xavier, Thank you for the patch. On Thu, Jun 23, 2022 at 04:31:12PM +0200, Xavier Roumegue wrote: > The DW100 driver gets the dewarping mapping as a binary blob from the > userspace application through a custom control. > The blob format is hardware specific so create a dedicated control for > this purpose. > > Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > .../userspace-api/media/drivers/dw100.rst | 13 +++++++++++++ > include/uapi/linux/dw100.h | 14 ++++++++++++++ > 2 files changed, 27 insertions(+) > create mode 100644 include/uapi/linux/dw100.h > > diff --git a/Documentation/userspace-api/media/drivers/dw100.rst b/Documentation/userspace-api/media/drivers/dw100.rst > index 1ca6fa55f539..d8a6e10b4395 100644 > --- a/Documentation/userspace-api/media/drivers/dw100.rst > +++ b/Documentation/userspace-api/media/drivers/dw100.rst > @@ -66,4 +66,17 @@ map. > More details on the DW100 hardware operations can be found in > *chapter 13.15 DeWarp* of IMX8MP_ reference manual. > > +The Vivante DW100 m2m driver implements the following driver-specific control: > + > +``V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (__u32 array)`` > + Specifies to DW100 driver its dewarping map (aka LUT) blob as described in > + *chapter 13.15.2.3 Dewarping Remap* of IMX8MP_ reference manual as an U32 > + dynamic array. The image is divided into many small 16x16 blocks. If the > + width/height of the image is not divisible by 16, the size of the > + rightmost/bottommost block is the remainder. The dewarping map only saves > + the vertex coordinates of the block. The dewarping grid map is comprised of > + vertex coordinates for x and y. Each x, y coordinate register uses 16 bits > + (UQ12.4) to record the coordinate address, with the Y coordinate in the > + upper bits and X in the lower bits. I would add "The driver modifies the dimensions of this control when the sink format is changed, to reflect the new input resolution." or something similar. > + > .. _IMX8MP: https://www.nxp.com/webapp/Download?colCode=IMX8MPRM > diff --git a/include/uapi/linux/dw100.h b/include/uapi/linux/dw100.h > new file mode 100644 > index 000000000000..3356496edd6b > --- /dev/null > +++ b/include/uapi/linux/dw100.h > @@ -0,0 +1,14 @@ > +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ > +/* Copyright 2022 NXP */ > + > +#ifndef __UAPI_DW100_H__ > +#define __UAPI_DW100_H__ > + > +#include <linux/v4l2-controls.h> > + > +/* > + * Check Documentation/userspace-api/media/drivers/dw100.rst for control details. > + */ > +#define V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (V4L2_CID_USER_DW100_BASE + 1) > + > +#endif
diff --git a/Documentation/userspace-api/media/drivers/dw100.rst b/Documentation/userspace-api/media/drivers/dw100.rst index 1ca6fa55f539..d8a6e10b4395 100644 --- a/Documentation/userspace-api/media/drivers/dw100.rst +++ b/Documentation/userspace-api/media/drivers/dw100.rst @@ -66,4 +66,17 @@ map. More details on the DW100 hardware operations can be found in *chapter 13.15 DeWarp* of IMX8MP_ reference manual. +The Vivante DW100 m2m driver implements the following driver-specific control: + +``V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (__u32 array)`` + Specifies to DW100 driver its dewarping map (aka LUT) blob as described in + *chapter 13.15.2.3 Dewarping Remap* of IMX8MP_ reference manual as an U32 + dynamic array. The image is divided into many small 16x16 blocks. If the + width/height of the image is not divisible by 16, the size of the + rightmost/bottommost block is the remainder. The dewarping map only saves + the vertex coordinates of the block. The dewarping grid map is comprised of + vertex coordinates for x and y. Each x, y coordinate register uses 16 bits + (UQ12.4) to record the coordinate address, with the Y coordinate in the + upper bits and X in the lower bits. + .. _IMX8MP: https://www.nxp.com/webapp/Download?colCode=IMX8MPRM diff --git a/include/uapi/linux/dw100.h b/include/uapi/linux/dw100.h new file mode 100644 index 000000000000..3356496edd6b --- /dev/null +++ b/include/uapi/linux/dw100.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* Copyright 2022 NXP */ + +#ifndef __UAPI_DW100_H__ +#define __UAPI_DW100_H__ + +#include <linux/v4l2-controls.h> + +/* + * Check Documentation/userspace-api/media/drivers/dw100.rst for control details. + */ +#define V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (V4L2_CID_USER_DW100_BASE + 1) + +#endif