@@ -29,103 +29,103 @@
#include <linux/of_device.h>
#include <linux/wait.h>
-#define UART_MR1 0x0000
-
-#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
-#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
-#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
-#define UART_MR1_RX_RDY_CTL BIT(7)
-#define UART_MR1_CTS_CTL BIT(6)
-
-#define UART_MR2 0x0004
-#define UART_MR2_ERROR_MODE BIT(6)
-#define UART_MR2_BITS_PER_CHAR 0x30
-#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
-#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
-#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
-#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
-#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
-#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
-#define UART_MR2_PARITY_MODE_NONE 0x0
-#define UART_MR2_PARITY_MODE_ODD 0x1
-#define UART_MR2_PARITY_MODE_EVEN 0x2
-#define UART_MR2_PARITY_MODE_SPACE 0x3
-#define UART_MR2_PARITY_MODE 0x3
-
-#define UART_CSR 0x0008
-
-#define UART_TF 0x000C
+#define MSM_UART_MR1 0x0000
+
+#define MSM_UART_MR1_AUTO_RFR_LEVEL0 0x3F
+#define MSM_UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
+#define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
+#define MSM_UART_MR1_RX_RDY_CTL BIT(7)
+#define MSM_UART_MR1_CTS_CTL BIT(6)
+
+#define MSM_UART_MR2 0x0004
+#define MSM_UART_MR2_ERROR_MODE BIT(6)
+#define MSM_UART_MR2_BITS_PER_CHAR 0x30
+#define MSM_UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
+#define MSM_UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
+#define MSM_UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
+#define MSM_UART_MR2_PARITY_MODE_NONE 0x0
+#define MSM_UART_MR2_PARITY_MODE_ODD 0x1
+#define MSM_UART_MR2_PARITY_MODE_EVEN 0x2
+#define MSM_UART_MR2_PARITY_MODE_SPACE 0x3
+#define MSM_UART_MR2_PARITY_MODE 0x3
+
+#define MSM_UART_CSR 0x0008
+
+#define MSM_UART_TF 0x000C
#define UARTDM_TF 0x0070
-#define UART_CR 0x0010
-#define UART_CR_CMD_NULL (0 << 4)
-#define UART_CR_CMD_RESET_RX (1 << 4)
-#define UART_CR_CMD_RESET_TX (2 << 4)
-#define UART_CR_CMD_RESET_ERR (3 << 4)
-#define UART_CR_CMD_RESET_BREAK_INT (4 << 4)
-#define UART_CR_CMD_START_BREAK (5 << 4)
-#define UART_CR_CMD_STOP_BREAK (6 << 4)
-#define UART_CR_CMD_RESET_CTS (7 << 4)
-#define UART_CR_CMD_RESET_STALE_INT (8 << 4)
-#define UART_CR_CMD_PACKET_MODE (9 << 4)
-#define UART_CR_CMD_MODE_RESET (12 << 4)
-#define UART_CR_CMD_SET_RFR (13 << 4)
-#define UART_CR_CMD_RESET_RFR (14 << 4)
-#define UART_CR_CMD_PROTECTION_EN (16 << 4)
-#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
-#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
-#define UART_CR_CMD_FORCE_STALE (4 << 8)
-#define UART_CR_CMD_RESET_TX_READY (3 << 8)
-#define UART_CR_TX_DISABLE BIT(3)
-#define UART_CR_TX_ENABLE BIT(2)
-#define UART_CR_RX_DISABLE BIT(1)
-#define UART_CR_RX_ENABLE BIT(0)
-#define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
-
-#define UART_IMR 0x0014
-#define UART_IMR_TXLEV BIT(0)
-#define UART_IMR_RXSTALE BIT(3)
-#define UART_IMR_RXLEV BIT(4)
-#define UART_IMR_DELTA_CTS BIT(5)
-#define UART_IMR_CURRENT_CTS BIT(6)
-#define UART_IMR_RXBREAK_START BIT(10)
-
-#define UART_IPR_RXSTALE_LAST 0x20
-#define UART_IPR_STALE_LSB 0x1F
-#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
-#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
-
-#define UART_IPR 0x0018
-#define UART_TFWR 0x001C
-#define UART_RFWR 0x0020
-#define UART_HCR 0x0024
-
-#define UART_MREG 0x0028
-#define UART_NREG 0x002C
-#define UART_DREG 0x0030
-#define UART_MNDREG 0x0034
-#define UART_IRDA 0x0038
-#define UART_MISR_MODE 0x0040
-#define UART_MISR_RESET 0x0044
-#define UART_MISR_EXPORT 0x0048
-#define UART_MISR_VAL 0x004C
-#define UART_TEST_CTRL 0x0050
-
-#define UART_SR 0x0008
-#define UART_SR_HUNT_CHAR BIT(7)
-#define UART_SR_RX_BREAK BIT(6)
-#define UART_SR_PAR_FRAME_ERR BIT(5)
-#define UART_SR_OVERRUN BIT(4)
-#define UART_SR_TX_EMPTY BIT(3)
-#define UART_SR_TX_READY BIT(2)
-#define UART_SR_RX_FULL BIT(1)
-#define UART_SR_RX_READY BIT(0)
-
-#define UART_RF 0x000C
+#define MSM_UART_CR 0x0010
+#define MSM_UART_CR_CMD_NULL (0 << 4)
+#define MSM_UART_CR_CMD_RESET_RX (1 << 4)
+#define MSM_UART_CR_CMD_RESET_TX (2 << 4)
+#define MSM_UART_CR_CMD_RESET_ERR (3 << 4)
+#define MSM_UART_CR_CMD_RESET_BREAK_INT (4 << 4)
+#define MSM_UART_CR_CMD_START_BREAK (5 << 4)
+#define MSM_UART_CR_CMD_STOP_BREAK (6 << 4)
+#define MSM_UART_CR_CMD_RESET_CTS (7 << 4)
+#define MSM_UART_CR_CMD_RESET_STALE_INT (8 << 4)
+#define MSM_UART_CR_CMD_PACKET_MODE (9 << 4)
+#define MSM_UART_CR_CMD_MODE_RESET (12 << 4)
+#define MSM_UART_CR_CMD_SET_RFR (13 << 4)
+#define MSM_UART_CR_CMD_RESET_RFR (14 << 4)
+#define MSM_UART_CR_CMD_PROTECTION_EN (16 << 4)
+#define MSM_UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
+#define MSM_UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
+#define MSM_UART_CR_CMD_FORCE_STALE (4 << 8)
+#define MSM_UART_CR_CMD_RESET_TX_READY (3 << 8)
+#define MSM_UART_CR_TX_DISABLE BIT(3)
+#define MSM_UART_CR_TX_ENABLE BIT(2)
+#define MSM_UART_CR_RX_DISABLE BIT(1)
+#define MSM_UART_CR_RX_ENABLE BIT(0)
+#define MSM_UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
+
+#define MSM_UART_IMR 0x0014
+#define MSM_UART_IMR_TXLEV BIT(0)
+#define MSM_UART_IMR_RXSTALE BIT(3)
+#define MSM_UART_IMR_RXLEV BIT(4)
+#define MSM_UART_IMR_DELTA_CTS BIT(5)
+#define MSM_UART_IMR_CURRENT_CTS BIT(6)
+#define MSM_UART_IMR_RXBREAK_START BIT(10)
+
+#define MSM_UART_IPR_RXSTALE_LAST 0x20
+#define MSM_UART_IPR_STALE_LSB 0x1F
+#define MSM_UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+#define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
+
+#define MSM_UART_IPR 0x0018
+#define MSM_UART_TFWR 0x001C
+#define MSM_UART_RFWR 0x0020
+#define MSM_UART_HCR 0x0024
+
+#define MSM_UART_MREG 0x0028
+#define MSM_UART_NREG 0x002C
+#define MSM_UART_DREG 0x0030
+#define MSM_UART_MNDREG 0x0034
+#define MSM_UART_IRDA 0x0038
+#define MSM_UART_MISR_MODE 0x0040
+#define MSM_UART_MISR_RESET 0x0044
+#define MSM_UART_MISR_EXPORT 0x0048
+#define MSM_UART_MISR_VAL 0x004C
+#define MSM_UART_TEST_CTRL 0x0050
+
+#define MSM_UART_SR 0x0008
+#define MSM_UART_SR_HUNT_CHAR BIT(7)
+#define MSM_UART_SR_RX_BREAK BIT(6)
+#define MSM_UART_SR_PAR_FRAME_ERR BIT(5)
+#define MSM_UART_SR_OVERRUN BIT(4)
+#define MSM_UART_SR_TX_EMPTY BIT(3)
+#define MSM_UART_SR_TX_READY BIT(2)
+#define MSM_UART_SR_RX_FULL BIT(1)
+#define MSM_UART_SR_RX_READY BIT(0)
+
+#define MSM_UART_RF 0x000C
#define UARTDM_RF 0x0070
-#define UART_MISR 0x0010
-#define UART_ISR 0x0014
-#define UART_ISR_TX_READY BIT(7)
+#define MSM_UART_MISR 0x0010
+#define MSM_UART_ISR 0x0014
+#define MSM_UART_ISR_TX_READY BIT(7)
#define UARTDM_RXFS 0x50
#define UARTDM_RXFS_BUF_SHIFT 0x7
@@ -203,10 +203,10 @@ unsigned int msm_read(struct uart_port *port, unsigned int off)
*/
static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
{
- msm_write(port, 0x06, UART_MREG);
- msm_write(port, 0xF1, UART_NREG);
- msm_write(port, 0x0F, UART_DREG);
- msm_write(port, 0x1A, UART_MNDREG);
+ msm_write(port, 0x06, MSM_UART_MREG);
+ msm_write(port, 0xF1, MSM_UART_NREG);
+ msm_write(port, 0x0F, MSM_UART_DREG);
+ msm_write(port, 0x1A, MSM_UART_MNDREG);
port->uartclk = 1843200;
}
@@ -215,10 +215,10 @@ static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
*/
static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
{
- msm_write(port, 0x18, UART_MREG);
- msm_write(port, 0xF6, UART_NREG);
- msm_write(port, 0x0F, UART_DREG);
- msm_write(port, 0x0A, UART_MNDREG);
+ msm_write(port, 0x18, MSM_UART_MREG);
+ msm_write(port, 0xF6, MSM_UART_NREG);
+ msm_write(port, 0x0F, MSM_UART_DREG);
+ msm_write(port, 0x0A, MSM_UART_MNDREG);
port->uartclk = 1843200;
}
@@ -395,22 +395,22 @@ static inline void msm_wait_for_xmitr(struct uart_port *port)
{
unsigned int timeout = 500000;
- while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
- if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
+ while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) {
+ if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY)
break;
udelay(1);
if (!timeout--)
break;
}
- msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR);
}
static void msm_stop_tx(struct uart_port *port)
{
struct msm_port *msm_port = to_msm_port(port);
- msm_port->imr &= ~UART_IMR_TXLEV;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr &= ~MSM_UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
}
static void msm_start_tx(struct uart_port *port)
@@ -422,8 +422,8 @@ static void msm_start_tx(struct uart_port *port)
if (dma->count)
return;
- msm_port->imr |= UART_IMR_TXLEV;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr |= MSM_UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
}
static void msm_reset_dm_count(struct uart_port *port, int count)
@@ -459,8 +459,8 @@ static void msm_complete_tx_dma(void *args)
msm_write(port, val, UARTDM_DMEN);
if (msm_port->is_uartdm > UARTDM_1P3) {
- msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
- msm_write(port, UART_CR_TX_ENABLE, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
}
count = dma->count - state.residue;
@@ -471,8 +471,8 @@ static void msm_complete_tx_dma(void *args)
xmit->tail &= UART_XMIT_SIZE - 1;
/* Restore "Tx FIFO below watermark" interrupt */
- msm_port->imr |= UART_IMR_TXLEV;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr |= MSM_UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
@@ -519,8 +519,8 @@ static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
* Using DMA complete for Tx FIFO reload, no need for
* "Tx FIFO below watermark" one, disable it
*/
- msm_port->imr &= ~UART_IMR_TXLEV;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr &= ~MSM_UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
dma->count = count;
@@ -562,10 +562,10 @@ static void msm_complete_rx_dma(void *args)
val &= ~dma->enable_bit;
msm_write(port, val, UARTDM_DMEN);
- if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
+ if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) {
port->icount.overrun++;
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
}
count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
@@ -587,7 +587,7 @@ static void msm_complete_rx_dma(void *args)
continue;
}
- if (!(port->read_status_mask & UART_SR_RX_BREAK))
+ if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
flag = TTY_NORMAL;
spin_unlock_irqrestore(&port->lock, flags);
@@ -641,23 +641,23 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
* Using DMA for FIFO off-load, no need for "Rx FIFO over
* watermark" or "stale" interrupts, disable them
*/
- msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+ msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
/*
* Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
* we need RXSTALE to flush input DMA fifo to memory
*/
if (msm_port->is_uartdm < UARTDM_1P4)
- msm_port->imr |= UART_IMR_RXSTALE;
+ msm_port->imr |= MSM_UART_IMR_RXSTALE;
- msm_write(uart, msm_port->imr, UART_IMR);
+ msm_write(uart, msm_port->imr, MSM_UART_IMR);
dma->count = UARTDM_RX_SIZE;
dma_async_issue_pending(dma->chan);
- msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
- msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+ msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
+ msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
val = msm_read(uart, UARTDM_DMEN);
val |= dma->enable_bit;
@@ -679,16 +679,16 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
* Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
* receiver must be reset.
*/
- msm_write(uart, UART_CR_CMD_RESET_RX, UART_CR);
- msm_write(uart, UART_CR_RX_ENABLE, UART_CR);
+ msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
+ msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
- msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
- msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+ msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
/* Re-enable RX interrupts */
- msm_port->imr |= (UART_IMR_RXLEV | UART_IMR_RXSTALE);
- msm_write(uart, msm_port->imr, UART_IMR);
+ msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE;
+ msm_write(uart, msm_port->imr, MSM_UART_IMR);
}
static void msm_stop_rx(struct uart_port *port)
@@ -696,8 +696,8 @@ static void msm_stop_rx(struct uart_port *port)
struct msm_port *msm_port = to_msm_port(port);
struct msm_dma *dma = &msm_port->rx_dma;
- msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
if (dma->chan)
msm_stop_dma(port, dma);
@@ -707,8 +707,8 @@ static void msm_enable_ms(struct uart_port *port)
{
struct msm_port *msm_port = to_msm_port(port);
- msm_port->imr |= UART_IMR_DELTA_CTS;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_port->imr |= MSM_UART_IMR_DELTA_CTS;
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
}
static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
@@ -719,18 +719,18 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
int count = 0;
struct msm_port *msm_port = to_msm_port(port);
- if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
port->icount.overrun++;
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
}
- if (misr & UART_IMR_RXSTALE) {
+ if (misr & MSM_UART_IMR_RXSTALE) {
count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
msm_port->old_snap_state;
msm_port->old_snap_state = 0;
} else {
- count = 4 * (msm_read(port, UART_RFWR));
+ count = 4 * (msm_read(port, MSM_UART_RFWR));
msm_port->old_snap_state += count;
}
@@ -742,8 +742,8 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
unsigned char buf[4];
int sysrq, r_count, i;
- sr = msm_read(port, UART_SR);
- if ((sr & UART_SR_RX_READY) == 0) {
+ sr = msm_read(port, MSM_UART_SR);
+ if ((sr & MSM_UART_SR_RX_READY) == 0) {
msm_port->old_snap_state -= count;
break;
}
@@ -762,7 +762,7 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
continue;
}
- if (!(port->read_status_mask & UART_SR_RX_BREAK))
+ if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
flag = TTY_NORMAL;
spin_unlock(&port->lock);
@@ -776,10 +776,10 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
tty_flip_buffer_push(tport);
- if (misr & (UART_IMR_RXSTALE))
- msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ if (misr & (MSM_UART_IMR_RXSTALE))
+ msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
- msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
/* Try to use DMA */
msm_start_rx_dma(msm_port);
@@ -795,25 +795,25 @@ static void msm_handle_rx(struct uart_port *port)
* Handle overrun. My understanding of the hardware is that overrun
* is not tied to the RX buffer, so we handle the case out of band.
*/
- if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
port->icount.overrun++;
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
}
/* and now the main RX loop */
- while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+ while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) {
unsigned int c;
char flag = TTY_NORMAL;
int sysrq;
- c = msm_read(port, UART_RF);
+ c = msm_read(port, MSM_UART_RF);
- if (sr & UART_SR_RX_BREAK) {
+ if (sr & MSM_UART_SR_RX_BREAK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
- } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ } else if (sr & MSM_UART_SR_PAR_FRAME_ERR) {
port->icount.frame++;
} else {
port->icount.rx++;
@@ -822,9 +822,9 @@ static void msm_handle_rx(struct uart_port *port)
/* Mask conditions we're ignorning. */
sr &= port->read_status_mask;
- if (sr & UART_SR_RX_BREAK)
+ if (sr & MSM_UART_SR_RX_BREAK)
flag = TTY_BREAK;
- else if (sr & UART_SR_PAR_FRAME_ERR)
+ else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
flag = TTY_FRAME;
spin_unlock(&port->lock);
@@ -848,7 +848,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
if (msm_port->is_uartdm)
tf = port->membase + UARTDM_TF;
else
- tf = port->membase + UART_TF;
+ tf = port->membase + MSM_UART_TF;
if (tx_count && msm_port->is_uartdm)
msm_reset_dm_count(port, tx_count);
@@ -857,7 +857,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
int i;
char buf[4] = { 0 };
- if (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
break;
if (msm_port->is_uartdm)
@@ -898,7 +898,7 @@ static void msm_handle_tx(struct uart_port *port)
if (msm_port->is_uartdm)
tf = port->membase + UARTDM_TF;
else
- tf = port->membase + UART_TF;
+ tf = port->membase + MSM_UART_TF;
buf[0] = port->x_char;
@@ -942,7 +942,7 @@ static void msm_handle_tx(struct uart_port *port)
static void msm_handle_delta_cts(struct uart_port *port)
{
- msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
port->icount.cts++;
wake_up_interruptible(&port->state->port.delta_msr_wait);
}
@@ -957,20 +957,20 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
u32 val;
spin_lock_irqsave(&port->lock, flags);
- misr = msm_read(port, UART_MISR);
- msm_write(port, 0, UART_IMR); /* disable interrupt */
+ misr = msm_read(port, MSM_UART_MISR);
+ msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
- if (misr & UART_IMR_RXBREAK_START) {
+ if (misr & MSM_UART_IMR_RXBREAK_START) {
msm_port->break_detected = true;
- msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR);
}
- if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
+ if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) {
if (dma->count) {
- val = UART_CR_CMD_STALE_EVENT_DISABLE;
- msm_write(port, val, UART_CR);
- val = UART_CR_CMD_RESET_STALE_INT;
- msm_write(port, val, UART_CR);
+ val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE;
+ msm_write(port, val, MSM_UART_CR);
+ val = MSM_UART_CR_CMD_RESET_STALE_INT;
+ msm_write(port, val, MSM_UART_CR);
/*
* Flush DMA input fifo to memory, this will also
* trigger DMA RX completion
@@ -982,12 +982,12 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
msm_handle_rx(port);
}
}
- if (misr & UART_IMR_TXLEV)
+ if (misr & MSM_UART_IMR_TXLEV)
msm_handle_tx(port);
- if (misr & UART_IMR_DELTA_CTS)
+ if (misr & MSM_UART_IMR_DELTA_CTS)
msm_handle_delta_cts(port);
- msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+ msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
@@ -995,7 +995,7 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
static unsigned int msm_tx_empty(struct uart_port *port)
{
- return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+ return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
}
static unsigned int msm_get_mctrl(struct uart_port *port)
@@ -1009,15 +1009,15 @@ static void msm_reset(struct uart_port *port)
unsigned int mr;
/* reset everything */
- msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
- msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
- msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
- msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
- msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
- msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
- mr = msm_read(port, UART_MR1);
- mr &= ~UART_MR1_RX_RDY_CTL;
- msm_write(port, mr, UART_MR1);
+ msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
+ mr = msm_read(port, MSM_UART_MR1);
+ mr &= ~MSM_UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, MSM_UART_MR1);
/* Disable DM modes */
if (msm_port->is_uartdm)
@@ -1028,24 +1028,24 @@ static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned int mr;
- mr = msm_read(port, UART_MR1);
+ mr = msm_read(port, MSM_UART_MR1);
if (!(mctrl & TIOCM_RTS)) {
- mr &= ~UART_MR1_RX_RDY_CTL;
- msm_write(port, mr, UART_MR1);
- msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ mr &= ~MSM_UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, MSM_UART_MR1);
+ msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
} else {
- mr |= UART_MR1_RX_RDY_CTL;
- msm_write(port, mr, UART_MR1);
+ mr |= MSM_UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, MSM_UART_MR1);
}
}
static void msm_break_ctl(struct uart_port *port, int break_ctl)
{
if (break_ctl)
- msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR);
else
- msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR);
}
struct msm_baud_map {
@@ -1142,45 +1142,45 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
*saved_flags = flags;
port->uartclk = rate;
- msm_write(port, entry->code, UART_CSR);
+ msm_write(port, entry->code, MSM_UART_CSR);
/* RX stale watermark */
rxstale = entry->rxstale;
- watermark = UART_IPR_STALE_LSB & rxstale;
+ watermark = MSM_UART_IPR_STALE_LSB & rxstale;
if (msm_port->is_uartdm) {
- mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
+ mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB;
} else {
- watermark |= UART_IPR_RXSTALE_LAST;
- mask = UART_IPR_STALE_TIMEOUT_MSB;
+ watermark |= MSM_UART_IPR_RXSTALE_LAST;
+ mask = MSM_UART_IPR_STALE_TIMEOUT_MSB;
}
watermark |= mask & (rxstale << 2);
- msm_write(port, watermark, UART_IPR);
+ msm_write(port, watermark, MSM_UART_IPR);
/* set RX watermark */
watermark = (port->fifosize * 3) / 4;
- msm_write(port, watermark, UART_RFWR);
+ msm_write(port, watermark, MSM_UART_RFWR);
/* set TX watermark */
- msm_write(port, 10, UART_TFWR);
+ msm_write(port, 10, MSM_UART_TFWR);
- msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR);
msm_reset(port);
/* Enable RX and TX */
- msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR);
+ msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
/* turn on RX and CTS interrupts */
- msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
- UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START;
+ msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE |
+ MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START;
- msm_write(port, msm_port->imr, UART_IMR);
+ msm_write(port, msm_port->imr, MSM_UART_IMR);
if (msm_port->is_uartdm) {
- msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
- msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
}
return baud;
@@ -1212,18 +1212,18 @@ static int msm_startup(struct uart_port *port)
rfr_level = port->fifosize;
/* set automatic RFR level */
- data = msm_read(port, UART_MR1);
+ data = msm_read(port, MSM_UART_MR1);
if (msm_port->is_uartdm)
- mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
+ mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1;
else
- mask = UART_MR1_AUTO_RFR_LEVEL1;
+ mask = MSM_UART_MR1_AUTO_RFR_LEVEL1;
data &= ~mask;
- data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+ data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0;
data |= mask & (rfr_level << 2);
- data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
- msm_write(port, data, UART_MR1);
+ data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+ msm_write(port, data, MSM_UART_MR1);
if (msm_port->is_uartdm) {
msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
@@ -1252,7 +1252,7 @@ static void msm_shutdown(struct uart_port *port)
struct msm_port *msm_port = to_msm_port(port);
msm_port->imr = 0;
- msm_write(port, 0, UART_IMR); /* disable interrupts */
+ msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */
if (msm_port->is_uartdm)
msm_release_dma(msm_port);
@@ -1282,60 +1282,60 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
tty_termios_encode_baud_rate(termios, baud, baud);
/* calculate parity */
- mr = msm_read(port, UART_MR2);
- mr &= ~UART_MR2_PARITY_MODE;
+ mr = msm_read(port, MSM_UART_MR2);
+ mr &= ~MSM_UART_MR2_PARITY_MODE;
if (termios->c_cflag & PARENB) {
if (termios->c_cflag & PARODD)
- mr |= UART_MR2_PARITY_MODE_ODD;
+ mr |= MSM_UART_MR2_PARITY_MODE_ODD;
else if (termios->c_cflag & CMSPAR)
- mr |= UART_MR2_PARITY_MODE_SPACE;
+ mr |= MSM_UART_MR2_PARITY_MODE_SPACE;
else
- mr |= UART_MR2_PARITY_MODE_EVEN;
+ mr |= MSM_UART_MR2_PARITY_MODE_EVEN;
}
/* calculate bits per char */
- mr &= ~UART_MR2_BITS_PER_CHAR;
+ mr &= ~MSM_UART_MR2_BITS_PER_CHAR;
switch (termios->c_cflag & CSIZE) {
case CS5:
- mr |= UART_MR2_BITS_PER_CHAR_5;
+ mr |= MSM_UART_MR2_BITS_PER_CHAR_5;
break;
case CS6:
- mr |= UART_MR2_BITS_PER_CHAR_6;
+ mr |= MSM_UART_MR2_BITS_PER_CHAR_6;
break;
case CS7:
- mr |= UART_MR2_BITS_PER_CHAR_7;
+ mr |= MSM_UART_MR2_BITS_PER_CHAR_7;
break;
case CS8:
default:
- mr |= UART_MR2_BITS_PER_CHAR_8;
+ mr |= MSM_UART_MR2_BITS_PER_CHAR_8;
break;
}
/* calculate stop bits */
- mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+ mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO);
if (termios->c_cflag & CSTOPB)
- mr |= UART_MR2_STOP_BIT_LEN_TWO;
+ mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO;
else
- mr |= UART_MR2_STOP_BIT_LEN_ONE;
+ mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE;
/* set parity, bits per char, and stop bit */
- msm_write(port, mr, UART_MR2);
+ msm_write(port, mr, MSM_UART_MR2);
/* calculate and set hardware flow control */
- mr = msm_read(port, UART_MR1);
- mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+ mr = msm_read(port, MSM_UART_MR1);
+ mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL);
if (termios->c_cflag & CRTSCTS) {
- mr |= UART_MR1_CTS_CTL;
- mr |= UART_MR1_RX_RDY_CTL;
+ mr |= MSM_UART_MR1_CTS_CTL;
+ mr |= MSM_UART_MR1_RX_RDY_CTL;
}
- msm_write(port, mr, UART_MR1);
+ msm_write(port, mr, MSM_UART_MR1);
/* Configure status bits to ignore based on termio flags. */
port->read_status_mask = 0;
if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+ port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- port->read_status_mask |= UART_SR_RX_BREAK;
+ port->read_status_mask |= MSM_UART_SR_RX_BREAK;
uart_update_timeout(port, termios->c_cflag, baud);
@@ -1439,9 +1439,9 @@ static void msm_power(struct uart_port *port, unsigned int state,
static int msm_poll_get_char_single(struct uart_port *port)
{
struct msm_port *msm_port = to_msm_port(port);
- unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+ unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF;
- if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+ if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY))
return NO_POLL_CHAR;
return msm_read(port, rf_reg) & 0xff;
@@ -1459,7 +1459,7 @@ static int msm_poll_get_char_dm(struct uart_port *port)
c = sp[sizeof(slop) - count];
count--;
/* Or if FIFO is empty */
- } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+ } else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) {
/*
* If RX packing buffer has less than a word, force stale to
* push contents into RX FIFO
@@ -1467,14 +1467,13 @@ static int msm_poll_get_char_dm(struct uart_port *port)
count = msm_read(port, UARTDM_RXFS);
count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
if (count) {
- msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR);
slop = msm_read(port, UARTDM_RF);
c = sp[0];
count--;
- msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
- msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE,
- UART_CR);
+ msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
} else {
c = NO_POLL_CHAR;
}
@@ -1495,8 +1494,8 @@ static int msm_poll_get_char(struct uart_port *port)
struct msm_port *msm_port = to_msm_port(port);
/* Disable all interrupts */
- imr = msm_read(port, UART_IMR);
- msm_write(port, 0, UART_IMR);
+ imr = msm_read(port, MSM_UART_IMR);
+ msm_write(port, 0, MSM_UART_IMR);
if (msm_port->is_uartdm)
c = msm_poll_get_char_dm(port);
@@ -1504,7 +1503,7 @@ static int msm_poll_get_char(struct uart_port *port)
c = msm_poll_get_char_single(port);
/* Enable interrupts */
- msm_write(port, imr, UART_IMR);
+ msm_write(port, imr, MSM_UART_IMR);
return c;
}
@@ -1515,25 +1514,25 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c)
struct msm_port *msm_port = to_msm_port(port);
/* Disable all interrupts */
- imr = msm_read(port, UART_IMR);
- msm_write(port, 0, UART_IMR);
+ imr = msm_read(port, MSM_UART_IMR);
+ msm_write(port, 0, MSM_UART_IMR);
if (msm_port->is_uartdm)
msm_reset_dm_count(port, 1);
/* Wait until FIFO is empty */
- while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
cpu_relax();
/* Write a character */
- msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+ msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF);
/* Wait until FIFO is empty */
- while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
cpu_relax();
/* Enable interrupts */
- msm_write(port, imr, UART_IMR);
+ msm_write(port, imr, MSM_UART_IMR);
}
#endif
@@ -1591,7 +1590,7 @@ static struct msm_port msm_uart_ports[] = {
},
};
-#define UART_NR ARRAY_SIZE(msm_uart_ports)
+#define MSM_UART_NR ARRAY_SIZE(msm_uart_ports)
static inline struct uart_port *msm_get_port_from_line(unsigned int line)
{
@@ -1612,7 +1611,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
if (is_uartdm)
tf = port->membase + UARTDM_TF;
else
- tf = port->membase + UART_TF;
+ tf = port->membase + MSM_UART_TF;
/* Account for newlines that will get a carriage return added */
for (i = 0; i < count; i++)
@@ -1658,7 +1657,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
}
}
- while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
cpu_relax();
iowrite32_rep(tf, buf, 1);
@@ -1677,7 +1676,7 @@ static void msm_console_write(struct console *co, const char *s,
struct uart_port *port;
struct msm_port *msm_port;
- BUG_ON(co->index < 0 || co->index >= UART_NR);
+ BUG_ON(co->index < 0 || co->index >= MSM_UART_NR);
port = msm_get_port_from_line(co->index);
msm_port = to_msm_port(port);
@@ -1693,7 +1692,7 @@ static int msm_console_setup(struct console *co, char *options)
int parity = 'n';
int flow = 'n';
- if (unlikely(co->index >= UART_NR || co->index < 0))
+ if (unlikely(co->index >= MSM_UART_NR || co->index < 0))
return -ENXIO;
port = msm_get_port_from_line(co->index);
@@ -1774,7 +1773,7 @@ static struct uart_driver msm_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "msm_serial",
.dev_name = "ttyMSM",
- .nr = UART_NR,
+ .nr = MSM_UART_NR,
.cons = MSM_CONSOLE,
};
@@ -1804,7 +1803,7 @@ static int msm_serial_probe(struct platform_device *pdev)
if (line < 0)
line = atomic_inc_return(&msm_uart_next_id) - 1;
- if (unlikely(line < 0 || line >= UART_NR))
+ if (unlikely(line < 0 || line >= MSM_UART_NR))
return -ENXIO;
dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);