diff mbox series

[v8,2/7] arm64: dts: qcom: sm8450: Add description of camera clock controller

Message ID 20220624115917.2524868-3-vladimir.zapolskiy@linaro.org
State New
Headers show
Series clk: qcom: add camera clock controller driver for SM8450 SoC | expand

Commit Message

Vladimir Zapolskiy June 24, 2022, 11:59 a.m. UTC
Add description of QCOM SM8450 camera clock controller.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
Changes from v7 to v8:
* rebased on top of v5.19-rc2,
* minor improvement to the commit message.

Changes from v6 to v7:
* rebased on top of v5.19-rc1.

Changes from v5 to v6:
* rebased on top of linux-next.

Changes from v3 to v5:
* none.

Changes from v2 to v3:
* account a renamed header file.

Changes from v1 to v2:
* disabled camcc device tree node by default.

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7d08fad76371..fad813a21df5 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -6,6 +6,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -2288,6 +2289,25 @@  IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8450-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			status = "disabled";
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "iface",
+				      "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			power-domains = <&rpmhpd SM8450_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8450-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;