| Message ID | 20220629143046.213584-14-aidanmacdonald.0x0@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for AXP192 PMIC | expand |
On Wed, Jun 29, 2022 at 4:30 PM Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > > Add a table-based lookup method for constant charge current, > which is necessary when the setting cannot be represented as > a linear range. > > This also replaces the hard-coded 300 mA default ccc setting > if the DT-specified value is unsupported; the minimum value > for the device is now set exactly instead of relying on the > value being rounded down to a supported value. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > drivers/power/supply/axp20x_battery.c | 59 +++++++++++++++++++++------ > 1 file changed, 47 insertions(+), 12 deletions(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 9106077c0dbb..401779d84d2b 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -61,6 +61,14 @@ struct axp20x_batt_ps; > struct axp_data { > int ccc_scale; > int ccc_offset; > + /* > + * Lookup table for constant charge current, if provided this is used > + * instead of ccc_scale/ccc_offset. > + * > + * The table is indexed by the field AXP20X_CHRG_CTRL1_TGT_CURR so it > + * must have AXP20X_CHRG_CTRL1_TGT_CURR+1 elements. > + */ > + const int *ccc_table; > bool has_fg_valid; > int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); > int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); > @@ -176,7 +184,10 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > > *val &= AXP20X_CHRG_CTRL1_TGT_CURR; > > - *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; > + if (axp->data->ccc_table) > + *val = axp->data->ccc_table[*val]; > + else > + *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; > > return 0; > } > @@ -389,16 +400,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > AXP20X_CHRG_CTRL1_TGT_VOLT, val); > } > > +static int axp20x_get_constant_charge_current_sel(struct axp20x_batt_ps *axp_batt, > + int charge_current) > +{ > + int i; > + > + if (axp_batt->data->ccc_table) { > + for (i = AXP20X_CHRG_CTRL1_TGT_CURR; i >= 0; i--) { > + if (axp_batt->data->ccc_table[i] <= charge_current) > + return i; > + } > + > + return -EINVAL; > + } > + > + i = (charge_current - axp_batt->data->ccc_offset) / axp_batt->data->ccc_scale; > + if (i > AXP20X_CHRG_CTRL1_TGT_CURR || i < 0) > + return -EINVAL; > + > + return i; > +} > + > static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > int charge_current) > { > if (charge_current > axp_batt->max_ccc) > return -EINVAL; > > - charge_current = (charge_current - axp_batt->data->ccc_offset) / > - axp_batt->data->ccc_scale; > - > - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > + charge_current = axp20x_get_constant_charge_current_sel(axp_batt, charge_current); > + if (charge_current < 0) > return -EINVAL; > > return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1, > @@ -410,14 +440,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > { > bool lower_max = false; > > - charge_current = (charge_current - axp->data->ccc_offset) / > - axp->data->ccc_scale; > - > - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > + charge_current = axp20x_get_constant_charge_current_sel(axp, charge_current); > + if (charge_current < 0) > return -EINVAL; > > - charge_current = charge_current * axp->data->ccc_scale + > - axp->data->ccc_offset; > + if (axp->data->ccc_table) > + charge_current = axp->data->ccc_table[charge_current]; > + else > + charge_current = charge_current * axp->data->ccc_scale + axp->data->ccc_offset; > > if (charge_current > axp->max_ccc) > dev_warn(axp->dev, > @@ -629,7 +659,12 @@ static int axp20x_power_probe(struct platform_device *pdev) > ccc)) { > dev_err(&pdev->dev, > "couldn't set constant charge current from DT: fallback to minimum value\n"); > - ccc = 300000; > + > + if (axp20x_batt->data->ccc_table) > + ccc = axp20x_batt->data->ccc_table[0]; > + else > + ccc = axp20x_batt->data->ccc_offset; > + > axp20x_batt->max_ccc = ccc; > axp20x_set_constant_charge_current(axp20x_batt, ccc); > } > -- > 2.35.1 >
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index 9106077c0dbb..401779d84d2b 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -61,6 +61,14 @@ struct axp20x_batt_ps; struct axp_data { int ccc_scale; int ccc_offset; + /* + * Lookup table for constant charge current, if provided this is used + * instead of ccc_scale/ccc_offset. + * + * The table is indexed by the field AXP20X_CHRG_CTRL1_TGT_CURR so it + * must have AXP20X_CHRG_CTRL1_TGT_CURR+1 elements. + */ + const int *ccc_table; bool has_fg_valid; int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); @@ -176,7 +184,10 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, *val &= AXP20X_CHRG_CTRL1_TGT_CURR; - *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; + if (axp->data->ccc_table) + *val = axp->data->ccc_table[*val]; + else + *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; return 0; } @@ -389,16 +400,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, AXP20X_CHRG_CTRL1_TGT_VOLT, val); } +static int axp20x_get_constant_charge_current_sel(struct axp20x_batt_ps *axp_batt, + int charge_current) +{ + int i; + + if (axp_batt->data->ccc_table) { + for (i = AXP20X_CHRG_CTRL1_TGT_CURR; i >= 0; i--) { + if (axp_batt->data->ccc_table[i] <= charge_current) + return i; + } + + return -EINVAL; + } + + i = (charge_current - axp_batt->data->ccc_offset) / axp_batt->data->ccc_scale; + if (i > AXP20X_CHRG_CTRL1_TGT_CURR || i < 0) + return -EINVAL; + + return i; +} + static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, int charge_current) { if (charge_current > axp_batt->max_ccc) return -EINVAL; - charge_current = (charge_current - axp_batt->data->ccc_offset) / - axp_batt->data->ccc_scale; - - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) + charge_current = axp20x_get_constant_charge_current_sel(axp_batt, charge_current); + if (charge_current < 0) return -EINVAL; return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1, @@ -410,14 +440,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, { bool lower_max = false; - charge_current = (charge_current - axp->data->ccc_offset) / - axp->data->ccc_scale; - - if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) + charge_current = axp20x_get_constant_charge_current_sel(axp, charge_current); + if (charge_current < 0) return -EINVAL; - charge_current = charge_current * axp->data->ccc_scale + - axp->data->ccc_offset; + if (axp->data->ccc_table) + charge_current = axp->data->ccc_table[charge_current]; + else + charge_current = charge_current * axp->data->ccc_scale + axp->data->ccc_offset; if (charge_current > axp->max_ccc) dev_warn(axp->dev, @@ -629,7 +659,12 @@ static int axp20x_power_probe(struct platform_device *pdev) ccc)) { dev_err(&pdev->dev, "couldn't set constant charge current from DT: fallback to minimum value\n"); - ccc = 300000; + + if (axp20x_batt->data->ccc_table) + ccc = axp20x_batt->data->ccc_table[0]; + else + ccc = axp20x_batt->data->ccc_offset; + axp20x_batt->max_ccc = ccc; axp20x_set_constant_charge_current(axp20x_batt, ccc); }
Add a table-based lookup method for constant charge current, which is necessary when the setting cannot be represented as a linear range. This also replaces the hard-coded 300 mA default ccc setting if the DT-specified value is unsupported; the minimum value for the device is now set exactly instead of relying on the value being rounded down to a supported value. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- drivers/power/supply/axp20x_battery.c | 59 +++++++++++++++++++++------ 1 file changed, 47 insertions(+), 12 deletions(-)