[v1,21/28] phy: qcom-qmp: qserdes-com: add missing registers

Message ID	20220705094320.1313312-22-dmitry.baryshkov@linaro.org
State	Accepted
Commit	f7c5cedb609231f64d54b043a9afc88179b01055
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de>, linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org Subject: [PATCH v1 21/28] phy: qcom-qmp: qserdes-com: add missing registers Date: Tue, 5 Jul 2022 12:43:13 +0300 Message-Id: <20220705094320.1313312-22-dmitry.baryshkov@linaro.org> In-Reply-To: <20220705094320.1313312-1-dmitry.baryshkov@linaro.org> References: <20220705094320.1313312-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	phy: qcom-qmp: split register tables \| expand [v1,00/28] phy: qcom-qmp: split register tables [v1,01/28] phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register [v1,02/28] phy: qcom-qmp-ufs: remove spurious register write in the msm8996 table [v1,03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region [v1,04/28] phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3 [v1,05/28] phy: qcom-qmp: drop special QMP V2 PCIE gen3 defines [v1,06/28] phy: qcom-qmp: rename QMP V2 PCS registers [v1,07/28] phy: qcom-qmp: use QPHY_V4_PCS for ipq6018/ipq8074 PCIe gen3 [v1,08/28] phy: qcom-qmp: move QSERDES registers to separate header [v1,09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers [v1,10/28] phy: qcom-qmp: move QSERDES V4 registers to separate headers [v1,11/28] phy: qcom-qmp: move QSERDES V5 registers to separate headers [v1,12/28] phy: qcom-qmp: move QSERDES PLL registers to separate header [v1,13/28] phy: qcom-qmp: move PCS V2 registers to separate header [v1,14/28] phy: qcom-qmp: move PCS V3 registers to separate headers [v1,15/28] phy: qcom-qmp: move PCS V4 registers to separate headers [v1,16/28] phy: qcom-qmp: move PCS V5 registers to separate headers [v1,17/28] phy: qcom-qmp: move PCIE QHP registers to separate header [v1,18/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers [v1,19/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers [v1,20/28] phy: qcom-qmp: split PCS_UFS V3 symbols to separate header [v1,21/28] phy: qcom-qmp: qserdes-com: add missing registers [v1,22/28] phy: qcom-qmp: qserdes-com-v3: add missing registers [v1,23/28] phy: qcom-qmp: qserdes-com-v4: add missing registers [v1,24/28] phy: qcom-qmp: qserdes-com-v5: add missing registers [v1,25/28] phy: qcom-qmp: pcs-v3: add missing registers [v1,26/28] phy: qcom-qmp: pcs-pcie-v4: add missing registers [v1,27/28] phy: qcom-qmp-usb: replace FLL layout writes for msm8996 [v1,28/28] phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME register

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 0f3ca0d93f34..5afa9132804d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -423,7 +423,7 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), - QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_TX_EMP_POST1_LVL, 0x36), QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h index 9dfa80263707..fbaf6ef467f8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h @@ -7,6 +7,9 @@ #define QCOM_PHY_QMP_QSERDES_COM_H_ /* Only for QMP V2 PHY - QSERDES COM registers */ +#define QSERDES_COM_ATB_SEL1 0x000 +#define QSERDES_COM_ATB_SEL2 0x004 +#define QSERDES_COM_FREQ_UPDATE 0x008 #define QSERDES_COM_BG_TIMER 0x00c #define QSERDES_COM_SSC_EN_CENTER 0x010 #define QSERDES_COM_SSC_ADJ_PER1 0x014 @@ -15,10 +18,13 @@ #define QSERDES_COM_SSC_PER2 0x020 #define QSERDES_COM_SSC_STEP_SIZE1 0x024 #define QSERDES_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_COM_POST_DIV 0x02c +#define QSERDES_COM_POST_DIV_MUX 0x030 #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 #define QSERDES_COM_CLK_ENABLE1 0x038 #define QSERDES_COM_SYS_CLK_CTRL 0x03c #define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_COM_PLL_EN 0x044 #define QSERDES_COM_PLL_IVCO 0x048 #define QSERDES_COM_LOCK_CMP1_MODE0 0x04c #define QSERDES_COM_LOCK_CMP2_MODE0 0x050 @@ -26,58 +32,109 @@ #define QSERDES_COM_LOCK_CMP1_MODE1 0x058 #define QSERDES_COM_LOCK_CMP2_MODE1 0x05c #define QSERDES_COM_LOCK_CMP3_MODE1 0x060 +#define QSERDES_COM_LOCK_CMP1_MODE2 0x064 +#define QSERDES_COM_CMN_RSVD0 0x064 +#define QSERDES_COM_LOCK_CMP2_MODE2 0x068 +#define QSERDES_COM_EP_CLOCK_DETECT_CTRL 0x068 +#define QSERDES_COM_LOCK_CMP3_MODE2 0x06c +#define QSERDES_COM_SYSCLK_DET_COMP_STATUS 0x06c #define QSERDES_COM_BG_TRIM 0x070 #define QSERDES_COM_CLK_EP_DIV 0x074 #define QSERDES_COM_CP_CTRL_MODE0 0x078 #define QSERDES_COM_CP_CTRL_MODE1 0x07c +#define QSERDES_COM_CP_CTRL_MODE2 0x080 +#define QSERDES_COM_CMN_RSVD1 0x080 #define QSERDES_COM_PLL_RCTRL_MODE0 0x084 #define QSERDES_COM_PLL_RCTRL_MODE1 0x088 +#define QSERDES_COM_PLL_RCTRL_MODE2 0x08c +#define QSERDES_COM_CMN_RSVD2 0x08c #define QSERDES_COM_PLL_CCTRL_MODE0 0x090 #define QSERDES_COM_PLL_CCTRL_MODE1 0x094 +#define QSERDES_COM_PLL_CCTRL_MODE2 0x098 +#define QSERDES_COM_CMN_RSVD3 0x098 +#define QSERDES_COM_PLL_CNTRL 0x09c +#define QSERDES_COM_PHASE_SEL_CTRL 0x0a0 +#define QSERDES_COM_PHASE_SEL_DC 0x0a4 +#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL 0x0a8 #define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8 #define QSERDES_COM_SYSCLK_EN_SEL 0x0ac +#define QSERDES_COM_CML_SYSCLK_SEL 0x0b0 #define QSERDES_COM_RESETSM_CNTRL 0x0b4 #define QSERDES_COM_RESETSM_CNTRL2 0x0b8 #define QSERDES_COM_RESTRIM_CTRL 0x0bc +#define QSERDES_COM_RESTRIM_CTRL2 0x0c0 #define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 #define QSERDES_COM_LOCK_CMP_EN 0x0c8 #define QSERDES_COM_LOCK_CMP_CFG 0x0cc #define QSERDES_COM_DEC_START_MODE0 0x0d0 #define QSERDES_COM_DEC_START_MODE1 0x0d4 +#define QSERDES_COM_DEC_START_MODE2 0x0d8 +#define QSERDES_COM_VCOCAL_DEADMAN_CTRL 0x0d8 #define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc #define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 #define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 #define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 #define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec #define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 +#define QSERDES_COM_DIV_FRAC_START1_MODE2 0x0f4 +#define QSERDES_COM_VCO_TUNE_MINVAL1 0x0f4 +#define QSERDES_COM_DIV_FRAC_START2_MODE2 0x0f8 +#define QSERDES_COM_VCO_TUNE_MINVAL2 0x0f8 +#define QSERDES_COM_DIV_FRAC_START3_MODE2 0x0fc +#define QSERDES_COM_CMN_RSVD4 0x0fc #define QSERDES_COM_INTEGLOOP_INITVAL 0x100 +#define QSERDES_COM_INTEGLOOP_EN 0x104 #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE2 0x118 +#define QSERDES_COM_VCO_TUNE_MAXVAL1 0x118 +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE2 0x11c +#define QSERDES_COM_VCO_TUNE_MAXVAL2 0x11c +#define QSERDES_COM_RES_TRIM_CONTROL2 0x120 #define QSERDES_COM_VCO_TUNE_CTRL 0x124 #define QSERDES_COM_VCO_TUNE_MAP 0x128 #define QSERDES_COM_VCO_TUNE1_MODE0 0x12c #define QSERDES_COM_VCO_TUNE2_MODE0 0x130 #define QSERDES_COM_VCO_TUNE1_MODE1 0x134 #define QSERDES_COM_VCO_TUNE2_MODE1 0x138 +#define QSERDES_COM_VCO_TUNE1_MODE2 0x13c #define QSERDES_COM_VCO_TUNE_INITVAL1 0x13c +#define QSERDES_COM_VCO_TUNE2_MODE2 0x140 #define QSERDES_COM_VCO_TUNE_INITVAL2 0x140 #define QSERDES_COM_VCO_TUNE_TIMER1 0x144 #define QSERDES_COM_VCO_TUNE_TIMER2 0x148 +#define QSERDES_COM_SAR 0x14c +#define QSERDES_COM_SAR_CLK 0x150 +#define QSERDES_COM_SAR_CODE_OUT_STATUS 0x154 +#define QSERDES_COM_SAR_CODE_READY_STATUS 0x158 +#define QSERDES_COM_CMN_STATUS 0x15c +#define QSERDES_COM_RESET_SM_STATUS 0x160 +#define QSERDES_COM_RESTRIM_CODE_STATUS 0x164 +#define QSERDES_COM_PLLCAL_CODE1_STATUS 0x168 +#define QSERDES_COM_PLLCAL_CODE2_STATUS 0x16c #define QSERDES_COM_BG_CTRL 0x170 #define QSERDES_COM_CLK_SELECT 0x174 #define QSERDES_COM_HSCLK_SEL 0x178 +#define QSERDES_COM_INTEGLOOP_BINCODE_STATUS 0x17c +#define QSERDES_COM_PLL_ANALOG 0x180 #define QSERDES_COM_CORECLK_DIV 0x184 +#define QSERDES_COM_SW_RESET 0x188 #define QSERDES_COM_CORE_CLK_EN 0x18c #define QSERDES_COM_C_READY_STATUS 0x190 #define QSERDES_COM_CMN_CONFIG 0x194 +#define QSERDES_COM_CMN_RATE_OVERRIDE 0x198 #define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c #define QSERDES_COM_DEBUG_BUS0 0x1a0 #define QSERDES_COM_DEBUG_BUS1 0x1a4 #define QSERDES_COM_DEBUG_BUS2 0x1a8 #define QSERDES_COM_DEBUG_BUS3 0x1ac #define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 +#define QSERDES_COM_CMN_MISC1 0x1b4 +#define QSERDES_COM_CMN_MISC2 0x1b8 #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc +#define QSERDES_COM_CORECLK_DIV_MODE2 0x1c0 +#define QSERDES_COM_CMN_RSVD5 0x1c0 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx.h index 583098a88b65..d20694513eb4 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx.h @@ -7,31 +7,143 @@ #define QCOM_PHY_QMP_QSERDES_TXRX_H_ /* Only for QMP V2 PHY - TX registers */ -#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_BIST_MODE_LANENO 0x000 +#define QSERDES_TX_BIST_INVERT 0x004 +#define QSERDES_TX_CLKBUF_ENABLE 0x008 +#define QSERDES_TX_CMN_CONTROL_ONE 0x00c +#define QSERDES_TX_CMN_CONTROL_TWO 0x010 +#define QSERDES_TX_CMN_CONTROL_THREE 0x014 +#define QSERDES_TX_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_TX_POST2_EMPH 0x01c +#define QSERDES_TX_TX_BOOST_LVL_UP_DN 0x020 +#define QSERDES_TX_HP_PD_ENABLES 0x024 +#define QSERDES_TX_TX_IDLE_LVL_LARGE_AMP 0x028 +#define QSERDES_TX_TX_DRV_LVL 0x02c +#define QSERDES_TX_TX_DRV_LVL_OFFSET 0x030 +#define QSERDES_TX_RESET_TSYNC_EN 0x034 +#define QSERDES_TX_PRE_STALL_LDO_BOOST_EN 0x038 +#define QSERDES_TX_TX_BAND 0x03c #define QSERDES_TX_SLEW_CNTL 0x040 +#define QSERDES_TX_INTERFACE_SELECT 0x044 +#define QSERDES_TX_LPB_EN 0x048 +#define QSERDES_TX_RES_CODE_LANE_TX 0x04c +#define QSERDES_TX_RES_CODE_LANE_RX 0x050 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 +#define QSERDES_TX_PERL_LENGTH1 0x058 +#define QSERDES_TX_PERL_LENGTH2 0x05c +#define QSERDES_TX_SERDES_BYP_EN_OUT 0x060 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 +#define QSERDES_TX_TX_POL_INV 0x06c +#define QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN 0x070 +#define QSERDES_TX_BIST_PATTERN1 0x074 +#define QSERDES_TX_BIST_PATTERN2 0x078 +#define QSERDES_TX_BIST_PATTERN3 0x07c +#define QSERDES_TX_BIST_PATTERN4 0x080 +#define QSERDES_TX_BIST_PATTERN5 0x084 +#define QSERDES_TX_BIST_PATTERN6 0x088 +#define QSERDES_TX_BIST_PATTERN7 0x08c +#define QSERDES_TX_BIST_PATTERN8 0x090 #define QSERDES_TX_LANE_MODE 0x094 +#define QSERDES_TX_IDAC_CAL_LANE_MODE 0x098 +#define QSERDES_TX_IDAC_CAL_LANE_MODE_CONFIGURATION 0x09c +#define QSERDES_TX_ATB_SEL1 0x0a0 +#define QSERDES_TX_ATB_SEL2 0x0a4 +#define QSERDES_TX_RCV_DETECT_LVL 0x0a8 #define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac +#define QSERDES_TX_PRBS_SEED1 0x0b0 +#define QSERDES_TX_PRBS_SEED2 0x0b4 +#define QSERDES_TX_PRBS_SEED3 0x0b8 +#define QSERDES_TX_PRBS_SEED4 0x0bc +#define QSERDES_TX_RESET_GEN 0x0c0 +#define QSERDES_TX_RESET_GEN_MUXES 0x0c4 +#define QSERDES_TX_TRAN_DRVR_EMP_EN 0x0c8 +#define QSERDES_TX_TX_INTERFACE_MODE 0x0cc +#define QSERDES_TX_PWM_CTRL 0x0d0 +#define QSERDES_TX_PWM_ENCODED_OR_DATA 0x0d4 +#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND2 0x0d8 +#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND2 0x0dc +#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND2 0x0e0 +#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND2 0x0e4 +#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0x0e8 +#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0x0ec +#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x0f0 +#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x0f4 +#define QSERDES_TX_VMODE_CTRL1 0x0f8 +#define QSERDES_TX_VMODE_CTRL2 0x0fc +#define QSERDES_TX_TX_ALOG_INTF_OBSV_CNTL 0x100 +#define QSERDES_TX_BIST_STATUS 0x104 +#define QSERDES_TX_BIST_ERROR_COUNT1 0x108 +#define QSERDES_TX_BIST_ERROR_COUNT2 0x10c +#define QSERDES_TX_TX_ALOG_INTF_OBSV 0x110 /* Only for QMP V2 PHY - RX registers */ +#define QSERDES_RX_UCDR_FO_GAIN_HALF 0x000 +#define QSERDES_RX_UCDR_FO_GAIN_QUARTER 0x004 +#define QSERDES_RX_UCDR_FO_GAIN_EIGHTH 0x008 +#define QSERDES_RX_UCDR_FO_GAIN 0x00c #define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 +#define QSERDES_RX_UCDR_SO_GAIN_QUARTER 0x014 +#define QSERDES_RX_UCDR_SO_GAIN_EIGHTH 0x018 #define QSERDES_RX_UCDR_SO_GAIN 0x01c +#define QSERDES_RX_UCDR_SVS_FO_GAIN_HALF 0x020 +#define QSERDES_RX_UCDR_SVS_FO_GAIN_QUARTER 0x024 +#define QSERDES_RX_UCDR_SVS_FO_GAIN_EIGHTH 0x028 +#define QSERDES_RX_UCDR_SVS_FO_GAIN 0x02c #define QSERDES_RX_UCDR_SVS_SO_GAIN_HALF 0x030 #define QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034 #define QSERDES_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038 #define QSERDES_RX_UCDR_SVS_SO_GAIN 0x03c #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 +#define QSERDES_RX_UCDR_FD_GAIN 0x044 #define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 +#define QSERDES_RX_UCDR_FO_TO_SO_DELAY 0x04c +#define QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW 0x050 +#define QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH 0x054 +#define QSERDES_RX_UCDR_MODULATE 0x058 +#define QSERDES_RX_UCDR_PI_CONTROLS 0x05c +#define QSERDES_RX_RBIST_CONTROL 0x060 +#define QSERDES_RX_AUX_CONTROL 0x064 +#define QSERDES_RX_AUX_DATA_TCOARSE 0x068 +#define QSERDES_RX_AUX_DATA_TFINE_LSB 0x06c +#define QSERDES_RX_AUX_DATA_TFINE_MSB 0x070 +#define QSERDES_RX_RCLK_AUXDATA_SEL 0x074 +#define QSERDES_RX_AC_JTAG_ENABLE 0x078 +#define QSERDES_RX_AC_JTAG_INITP 0x07c +#define QSERDES_RX_AC_JTAG_INITN 0x080 +#define QSERDES_RX_AC_JTAG_LVL 0x084 +#define QSERDES_RX_AC_JTAG_MODE 0x088 +#define QSERDES_RX_AC_JTAG_RESET 0x08c #define QSERDES_RX_RX_TERM_BW 0x090 +#define QSERDES_RX_RX_RCVR_IQ_EN 0x094 +#define QSERDES_RX_RX_IDAC_I_DC_OFFSETS 0x098 +#define QSERDES_RX_RX_IDAC_IBAR_DC_OFFSETS 0x09c +#define QSERDES_RX_RX_IDAC_Q_DC_OFFSETS 0x0a0 +#define QSERDES_RX_RX_IDAC_QBAR_DC_OFFSETS 0x0a4 +#define QSERDES_RX_RX_IDAC_A_DC_OFFSETS 0x0a8 +#define QSERDES_RX_RX_IDAC_ABAR_DC_OFFSETS 0x0ac +#define QSERDES_RX_RX_IDAC_EN 0x0b0 +#define QSERDES_RX_RX_IDAC_ENABLES 0x0b4 +#define QSERDES_RX_RX_IDAC_SIGN 0x0b8 +#define QSERDES_RX_RX_HIGHZ_HIGHRATE 0x0bc +#define QSERDES_RX_RX_TERM_AC_BYPASS_DC_COUPLE_OFFSET 0x0c0 #define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 #define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 #define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc #define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1 0x0d4 #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 +#define QSERDES_RX_RX_IDAC_CAL_CONFIGURATION 0x0e4 +#define QSERDES_RX_RX_IDAC_TSETTLE_LOW 0x0e8 +#define QSERDES_RX_RX_IDAC_TSETTLE_HIGH 0x0ec +#define QSERDES_RX_RX_IDAC_ENDSAMP_LOW 0x0f0 +#define QSERDES_RX_RX_IDAC_ENDSAMP_HIGH 0x0f4 +#define QSERDES_RX_RX_IDAC_MIDPOINT_LOW 0x0f8 +#define QSERDES_RX_RX_IDAC_MIDPOINT_HIGH 0x0fc +#define QSERDES_RX_RX_EQ_OFFSET_LSB 0x100 +#define QSERDES_RX_RX_EQ_OFFSET_MSB 0x104 #define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 #define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c #define QSERDES_RX_SIGDET_ENABLES 0x110 @@ -39,6 +151,55 @@ #define QSERDES_RX_SIGDET_LVL 0x118 #define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c #define QSERDES_RX_RX_BAND 0x120 +#define QSERDES_RX_CDR_FREEZE_UP_DN 0x124 +#define QSERDES_RX_CDR_RESET_OVERRIDE 0x128 #define QSERDES_RX_RX_INTERFACE_MODE 0x12c +#define QSERDES_RX_JITTER_GEN_MODE 0x130 +#define QSERDES_RX_BUJ_AMP 0x134 +#define QSERDES_RX_SJ_AMP1 0x138 +#define QSERDES_RX_SJ_AMP2 0x13c +#define QSERDES_RX_SJ_PER1 0x140 +#define QSERDES_RX_SJ_PER2 0x144 +#define QSERDES_RX_BUJ_STEP_FREQ1 0x148 +#define QSERDES_RX_BUJ_STEP_FREQ2 0x14c +#define QSERDES_RX_PPM_OFFSET1 0x150 +#define QSERDES_RX_PPM_OFFSET2 0x154 +#define QSERDES_RX_SIGN_PPM_PERIOD1 0x158 +#define QSERDES_RX_SIGN_PPM_PERIOD2 0x15c +#define QSERDES_RX_SSC_CTRL 0x160 +#define QSERDES_RX_SSC_COUNT1 0x164 +#define QSERDES_RX_SSC_COUNT2 0x168 +#define QSERDES_RX_RX_ALOG_INTF_OBSV_CNTL 0x16c +#define QSERDES_RX_RX_PWM_ENABLE_AND_DATA 0x170 +#define QSERDES_RX_RX_PWM_GEAR1_TIMEOUT_COUNT 0x174 +#define QSERDES_RX_RX_PWM_GEAR2_TIMEOUT_COUNT 0x178 +#define QSERDES_RX_RX_PWM_GEAR3_TIMEOUT_COUNT 0x17c +#define QSERDES_RX_RX_PWM_GEAR4_TIMEOUT_COUNT 0x180 +#define QSERDES_RX_PI_CTRL1 0x184 +#define QSERDES_RX_PI_CTRL2 0x188 +#define QSERDES_RX_PI_QUAD 0x18c +#define QSERDES_RX_IDATA1 0x190 +#define QSERDES_RX_IDATA2 0x194 +#define QSERDES_RX_AUX_DATA1 0x198 +#define QSERDES_RX_AUX_DATA2 0x19c +#define QSERDES_RX_AC_JTAG_OUTP 0x1a0 +#define QSERDES_RX_AC_JTAG_OUTN 0x1a4 +#define QSERDES_RX_RX_SIGDET 0x1a8 +#define QSERDES_RX_RX_VDCOFF 0x1ac +#define QSERDES_RX_IDAC_CAL_ON 0x1b0 +#define QSERDES_RX_IDAC_STATUS_I 0x1b4 +#define QSERDES_RX_IDAC_STATUS_IBAR 0x1b8 +#define QSERDES_RX_IDAC_STATUS_Q 0x1bc +#define QSERDES_RX_IDAC_STATUS_QBAR 0x1c0 +#define QSERDES_RX_IDAC_STATUS_A 0x1c4 +#define QSERDES_RX_IDAC_STATUS_ABAR 0x1c8 +#define QSERDES_RX_CALST_STATUS_I 0x1cc +#define QSERDES_RX_CALST_STATUS_Q 0x1d0 +#define QSERDES_RX_CALST_STATUS_A 0x1d4 +#define QSERDES_RX_RX_ALOG_INTF_OBSV 0x1d8 +#define QSERDES_RX_READ_EQCODE 0x1dc +#define QSERDES_RX_READ_OFFSETCODE 0x1e0 +#define QSERDES_RX_IA_ERROR_COUNTER_LOW 0x1e4 +#define QSERDES_RX_IA_ERROR_COUNTER_HIGH 0x1e8 #endif

[v1,21/28] phy: qcom-qmp: qserdes-com: add missing registers

Commit Message

Patch