[v1,09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers

Message ID	20220705094320.1313312-10-dmitry.baryshkov@linaro.org
State	Accepted
Commit	a7fc833e2b6b99edbc867145f1c3266dcb7fca25
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de>, linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org Subject: [PATCH v1 09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers Date: Tue, 5 Jul 2022 12:43:01 +0300 Message-Id: <20220705094320.1313312-10-dmitry.baryshkov@linaro.org> In-Reply-To: <20220705094320.1313312-1-dmitry.baryshkov@linaro.org> References: <20220705094320.1313312-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	phy: qcom-qmp: split register tables \| expand [v1,00/28] phy: qcom-qmp: split register tables [v1,01/28] phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register [v1,02/28] phy: qcom-qmp-ufs: remove spurious register write in the msm8996 table [v1,03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region [v1,04/28] phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3 [v1,05/28] phy: qcom-qmp: drop special QMP V2 PCIE gen3 defines [v1,06/28] phy: qcom-qmp: rename QMP V2 PCS registers [v1,07/28] phy: qcom-qmp: use QPHY_V4_PCS for ipq6018/ipq8074 PCIe gen3 [v1,08/28] phy: qcom-qmp: move QSERDES registers to separate header [v1,09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers [v1,10/28] phy: qcom-qmp: move QSERDES V4 registers to separate headers [v1,11/28] phy: qcom-qmp: move QSERDES V5 registers to separate headers [v1,12/28] phy: qcom-qmp: move QSERDES PLL registers to separate header [v1,13/28] phy: qcom-qmp: move PCS V2 registers to separate header [v1,14/28] phy: qcom-qmp: move PCS V3 registers to separate headers [v1,15/28] phy: qcom-qmp: move PCS V4 registers to separate headers [v1,16/28] phy: qcom-qmp: move PCS V5 registers to separate headers [v1,17/28] phy: qcom-qmp: move PCIE QHP registers to separate header [v1,18/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers [v1,19/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers [v1,20/28] phy: qcom-qmp: split PCS_UFS V3 symbols to separate header [v1,21/28] phy: qcom-qmp: qserdes-com: add missing registers [v1,22/28] phy: qcom-qmp: qserdes-com-v3: add missing registers [v1,23/28] phy: qcom-qmp: qserdes-com-v4: add missing registers [v1,24/28] phy: qcom-qmp: qserdes-com-v5: add missing registers [v1,25/28] phy: qcom-qmp: pcs-v3: add missing registers [v1,26/28] phy: qcom-qmp: pcs-pcie-v4: add missing registers [v1,27/28] phy: qcom-qmp-usb: replace FLL layout writes for msm8996 [v1,28/28] phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME register

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h new file mode 100644 index 000000000000..a61f8d36d01e --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h @@ -0,0 +1,86 @@ + +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_COM_V3_H_ +#define QCOM_PHY_QMP_QSERDES_COM_V3_H_ + +/* Only for QMP V3 PHY - QSERDES COM registers */ +#define QSERDES_V3_COM_ATB_SEL1 0x000 +#define QSERDES_V3_COM_ATB_SEL2 0x004 +#define QSERDES_V3_COM_FREQ_UPDATE 0x008 +#define QSERDES_V3_COM_BG_TIMER 0x00c +#define QSERDES_V3_COM_SSC_EN_CENTER 0x010 +#define QSERDES_V3_COM_SSC_ADJ_PER1 0x014 +#define QSERDES_V3_COM_SSC_ADJ_PER2 0x018 +#define QSERDES_V3_COM_SSC_PER1 0x01c +#define QSERDES_V3_COM_SSC_PER2 0x020 +#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 +#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_V3_COM_POST_DIV 0x02c +#define QSERDES_V3_COM_POST_DIV_MUX 0x030 +#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 +#define QSERDES_V3_COM_CLK_ENABLE1 0x038 +#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c +#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_V3_COM_PLL_EN 0x044 +#define QSERDES_V3_COM_PLL_IVCO 0x048 +#define QSERDES_V3_COM_CLK_EP_DIV 0x05c +#define QSERDES_V3_COM_CP_CTRL_MODE0 0x060 +#define QSERDES_V3_COM_CP_CTRL_MODE1 0x064 +#define QSERDES_V3_COM_PLL_RCTRL_MODE0 0x068 +#define QSERDES_V3_COM_PLL_RCTRL_MODE1 0x06c +#define QSERDES_V3_COM_PLL_CCTRL_MODE0 0x070 +#define QSERDES_V3_COM_PLL_CCTRL_MODE1 0x074 +#define QSERDES_V3_COM_SYSCLK_EN_SEL 0x080 +#define QSERDES_V3_COM_RESETSM_CNTRL 0x088 +#define QSERDES_V3_COM_RESETSM_CNTRL2 0x08c +#define QSERDES_V3_COM_LOCK_CMP_EN 0x090 +#define QSERDES_V3_COM_LOCK_CMP_CFG 0x094 +#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098 +#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c +#define QSERDES_V3_COM_LOCK_CMP3_MODE0 0x0a0 +#define QSERDES_V3_COM_LOCK_CMP1_MODE1 0x0a4 +#define QSERDES_V3_COM_LOCK_CMP2_MODE1 0x0a8 +#define QSERDES_V3_COM_LOCK_CMP3_MODE1 0x0ac +#define QSERDES_V3_COM_DEC_START_MODE0 0x0b0 +#define QSERDES_V3_COM_DEC_START_MODE1 0x0b4 +#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0 0x0b8 +#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0 0x0bc +#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0 0x0c0 +#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4 +#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8 +#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc +#define QSERDES_V3_COM_INTEGLOOP_INITVAL 0x0d0 +#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8 +#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc +#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0 +#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1 0x0e4 +#define QSERDES_V3_COM_VCO_TUNE_CTRL 0x0ec +#define QSERDES_V3_COM_VCO_TUNE_MAP 0x0f0 +#define QSERDES_V3_COM_VCO_TUNE1_MODE0 0x0f4 +#define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 +#define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc +#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108 +#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c +#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 +#define QSERDES_V3_COM_CLK_SELECT 0x138 +#define QSERDES_V3_COM_HSCLK_SEL 0x13c +#define QSERDES_V3_COM_CORECLK_DIV_MODE0 0x148 +#define QSERDES_V3_COM_CORECLK_DIV_MODE1 0x14c +#define QSERDES_V3_COM_CORE_CLK_EN 0x154 +#define QSERDES_V3_COM_C_READY_STATUS 0x158 +#define QSERDES_V3_COM_CMN_CONFIG 0x15c +#define QSERDES_V3_COM_SVS_MODE_CLK_SEL 0x164 +#define QSERDES_V3_COM_DEBUG_BUS0 0x168 +#define QSERDES_V3_COM_DEBUG_BUS1 0x16c +#define QSERDES_V3_COM_DEBUG_BUS2 0x170 +#define QSERDES_V3_COM_DEBUG_BUS3 0x174 +#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178 +#define QSERDES_V3_COM_CMN_MODE 0x184 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h new file mode 100644 index 000000000000..2c7238df38d7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V3_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_V3_H_ + +/* Only for QMP V3 PHY - TX registers */ +#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000 +#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008 +#define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c +#define QSERDES_V3_TX_TX_DRV_LVL 0x01c +#define QSERDES_V3_TX_RESET_TSYNC_EN 0x024 +#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028 +#define QSERDES_V3_TX_TX_BAND 0x02c +#define QSERDES_V3_TX_SLEW_CNTL 0x030 +#define QSERDES_V3_TX_INTERFACE_SELECT 0x034 +#define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c +#define QSERDES_V3_TX_RES_CODE_LANE_RX 0x040 +#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044 +#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048 +#define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058 +#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN 0x05c +#define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060 +#define QSERDES_V3_TX_TX_POL_INV 0x064 +#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068 +#define QSERDES_V3_TX_LANE_MODE_1 0x08c +#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4 +#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0 +#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4 +#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0 + +/* Only for QMP V3 PHY - RX registers */ +#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008 +#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c +#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c +#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 +#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040 +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044 +#define QSERDES_V3_RX_RX_TERM_BW 0x07c +#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc +#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 +#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8 +#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4 +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3 0x0d8 +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4 0x0dc +#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x0f8 +#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x0fc +#define QSERDES_V3_RX_SIGDET_ENABLES 0x100 +#define QSERDES_V3_RX_SIGDET_CNTRL 0x104 +#define QSERDES_V3_RX_SIGDET_LVL 0x108 +#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c +#define QSERDES_V3_RX_RX_BAND 0x110 +#define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c +#define QSERDES_V3_RX_RX_MODE_00 0x164 +#define QSERDES_V3_RX_RX_MODE_01 0x168 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6a24d61098e7..19bbe5aa9354 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -9,6 +9,9 @@ #include "phy-qcom-qmp-qserdes-com.h" #include "phy-qcom-qmp-qserdes-txrx.h" +#include "phy-qcom-qmp-qserdes-com-v3.h" +#include "phy-qcom-qmp-qserdes-txrx-v3.h" + /* QMP V2 PHY for PCIE gen3 ports - QSERDES PLL registers */ #define QSERDES_PLL_BG_TIMER 0x00c @@ -105,21 +108,7 @@ #define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL 0x14 #define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c -/* Only for QMP V3 PHY - QSERDES COM registers */ -#define QSERDES_V3_COM_ATB_SEL1 0x000 -#define QSERDES_V3_COM_ATB_SEL2 0x004 -#define QSERDES_V3_COM_FREQ_UPDATE 0x008 -#define QSERDES_V3_COM_BG_TIMER 0x00c -#define QSERDES_V3_COM_SSC_EN_CENTER 0x010 -#define QSERDES_V3_COM_SSC_ADJ_PER1 0x014 -#define QSERDES_V3_COM_SSC_ADJ_PER2 0x018 -#define QSERDES_V3_COM_SSC_PER1 0x01c -#define QSERDES_V3_COM_SSC_PER2 0x020 -#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 -#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 -#define QSERDES_V3_COM_POST_DIV 0x02c -#define QSERDES_V3_COM_POST_DIV_MUX 0x030 -#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 +/* QSERDES V3 COM bits */ # define QSERDES_V3_COM_BIAS_EN 0x0001 # define QSERDES_V3_COM_BIAS_EN_MUX 0x0002 # define QSERDES_V3_COM_CLKBUF_R_EN 0x0004 @@ -127,130 +116,13 @@ # define QSERDES_V3_COM_EN_SYSCLK_TX_SEL 0x0010 # define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L 0x0020 # define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R 0x0040 -#define QSERDES_V3_COM_CLK_ENABLE1 0x038 -#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c -#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 -#define QSERDES_V3_COM_PLL_EN 0x044 -#define QSERDES_V3_COM_PLL_IVCO 0x048 -#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098 -#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c -#define QSERDES_V3_COM_LOCK_CMP3_MODE0 0x0a0 -#define QSERDES_V3_COM_LOCK_CMP1_MODE1 0x0a4 -#define QSERDES_V3_COM_LOCK_CMP2_MODE1 0x0a8 -#define QSERDES_V3_COM_LOCK_CMP3_MODE1 0x0ac -#define QSERDES_V3_COM_CLK_EP_DIV 0x05c -#define QSERDES_V3_COM_CP_CTRL_MODE0 0x060 -#define QSERDES_V3_COM_CP_CTRL_MODE1 0x064 -#define QSERDES_V3_COM_PLL_RCTRL_MODE0 0x068 -#define QSERDES_V3_COM_PLL_RCTRL_MODE1 0x06c -#define QSERDES_V3_COM_PLL_CCTRL_MODE0 0x070 -#define QSERDES_V3_COM_PLL_CCTRL_MODE1 0x074 -#define QSERDES_V3_COM_SYSCLK_EN_SEL 0x080 -#define QSERDES_V3_COM_RESETSM_CNTRL 0x088 -#define QSERDES_V3_COM_RESETSM_CNTRL2 0x08c -#define QSERDES_V3_COM_LOCK_CMP_EN 0x090 -#define QSERDES_V3_COM_LOCK_CMP_CFG 0x094 -#define QSERDES_V3_COM_DEC_START_MODE0 0x0b0 -#define QSERDES_V3_COM_DEC_START_MODE1 0x0b4 -#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0 0x0b8 -#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0 0x0bc -#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0 0x0c0 -#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4 -#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8 -#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc -#define QSERDES_V3_COM_INTEGLOOP_INITVAL 0x0d0 -#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8 -#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc -#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0 -#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1 0x0e4 -#define QSERDES_V3_COM_VCO_TUNE_CTRL 0x0ec -#define QSERDES_V3_COM_VCO_TUNE_MAP 0x0f0 -#define QSERDES_V3_COM_VCO_TUNE1_MODE0 0x0f4 -#define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 -#define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc -#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 -#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104 -#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108 -#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c -#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 -#define QSERDES_V3_COM_CLK_SELECT 0x138 -#define QSERDES_V3_COM_HSCLK_SEL 0x13c -#define QSERDES_V3_COM_CORECLK_DIV_MODE0 0x148 -#define QSERDES_V3_COM_CORECLK_DIV_MODE1 0x14c -#define QSERDES_V3_COM_CORE_CLK_EN 0x154 -#define QSERDES_V3_COM_C_READY_STATUS 0x158 -#define QSERDES_V3_COM_CMN_CONFIG 0x15c -#define QSERDES_V3_COM_SVS_MODE_CLK_SEL 0x164 -#define QSERDES_V3_COM_DEBUG_BUS0 0x168 -#define QSERDES_V3_COM_DEBUG_BUS1 0x16c -#define QSERDES_V3_COM_DEBUG_BUS2 0x170 -#define QSERDES_V3_COM_DEBUG_BUS3 0x174 -#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178 -#define QSERDES_V3_COM_CMN_MODE 0x184 -/* Only for QMP V3 PHY - TX registers */ -#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000 -#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008 -#define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c +/* QSERDES V3 TX bits */ # define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK 0x001f # define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN 0x0020 - -#define QSERDES_V3_TX_TX_DRV_LVL 0x01c # define DP_PHY_TXn_TX_DRV_LVL_MASK 0x001f # define DP_PHY_TXn_TX_DRV_LVL_MUX_EN 0x0020 -#define QSERDES_V3_TX_RESET_TSYNC_EN 0x024 -#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028 - -#define QSERDES_V3_TX_TX_BAND 0x02c -#define QSERDES_V3_TX_SLEW_CNTL 0x030 -#define QSERDES_V3_TX_INTERFACE_SELECT 0x034 -#define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c -#define QSERDES_V3_TX_RES_CODE_LANE_RX 0x040 -#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044 -#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048 -#define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058 -#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN 0x05c -#define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060 -#define QSERDES_V3_TX_TX_POL_INV 0x064 -#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068 -#define QSERDES_V3_TX_LANE_MODE_1 0x08c -#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4 -#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0 -#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4 -#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0 - -/* Only for QMP V3 PHY - RX registers */ -#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008 -#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c -#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 -#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024 -#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 -#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c -#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 -#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 -#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c -#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040 -#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044 -#define QSERDES_V3_RX_RX_TERM_BW 0x07c -#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc -#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 -#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8 -#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc -#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4 -#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3 0x0d8 -#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4 0x0dc -#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x0f8 -#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x0fc -#define QSERDES_V3_RX_SIGDET_ENABLES 0x100 -#define QSERDES_V3_RX_SIGDET_CNTRL 0x104 -#define QSERDES_V3_RX_SIGDET_LVL 0x108 -#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c -#define QSERDES_V3_RX_RX_BAND 0x110 -#define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c -#define QSERDES_V3_RX_RX_MODE_00 0x164 -#define QSERDES_V3_RX_RX_MODE_01 0x168 - /* Only for QMP V3 PHY - PCS registers */ #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004 #define QPHY_V3_PCS_TXMGN_V0 0x00c

[v1,09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers

Commit Message

Patch