diff mbox series

[V3,7/7] remoteproc: sysmon: Send sysmon state only for running rprocs

Message ID 1657022900-2049-8-git-send-email-quic_sibis@quicinc.com
State New
Headers show
Series Miscellaneous PAS fixes | expand

Commit Message

Sibi Sankar July 5, 2022, 12:08 p.m. UTC 
From: Siddharth Gupta <sidgup@codeaurora.org>

When a new remoteproc boots up, send the sysmon state notification
of only running remoteprocs. Sending state of remoteprocs booting
up in parallel can cause a race between SSR clients of the remoteproc
that is booting up and the sysmon notification for the same remoteproc,
resulting in an inconsistency between which state the remoteproc that
is booting up in parallel.

For example - if remoteproc A and B crash one after the other, after
remoteproc A boots up, if the remoteproc A tries to get the state of
remoteproc B before the sysmon subdevice for B is invoked but after
the ssr subdevice of B has been invoked, clients on remoteproc A
might get confused when the sysmon notification indicates a different
state.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_sysmon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio July 6, 2022, 12:43 p.m. UTC | #1 
On 5.07.2022 14:08, Sibi Sankar wrote:
> From: Siddharth Gupta <sidgup@codeaurora.org>
> 
> When a new remoteproc boots up, send the sysmon state notification
> of only running remoteprocs. Sending state of remoteprocs booting
> up in parallel can cause a race between SSR clients of the remoteproc
> that is booting up and the sysmon notification for the same remoteproc,
> resulting in an inconsistency between which state the remoteproc that
> is booting up in parallel.
> 
> For example - if remoteproc A and B crash one after the other, after
> remoteproc A boots up, if the remoteproc A tries to get the state of
> remoteproc B before the sysmon subdevice for B is invoked but after
> the ssr subdevice of B has been invoked, clients on remoteproc A
> might get confused when the sysmon notification indicates a different
> state.
> 
> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  drivers/remoteproc/qcom_sysmon.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
> index a9f04dd83ab6..57dde2a69b9d 100644
> --- a/drivers/remoteproc/qcom_sysmon.c
> +++ b/drivers/remoteproc/qcom_sysmon.c
> @@ -512,10 +512,12 @@ static int sysmon_start(struct rproc_subdev *subdev)
>  
>  	mutex_lock(&sysmon_lock);
>  	list_for_each_entry(target, &sysmon_list, node) {
> -		if (target == sysmon)
> +		mutex_lock(&target->state_lock);
> +		if (target == sysmon || target->state != SSCTL_SSR_EVENT_AFTER_POWERUP) {
> +			mutex_unlock(&target->state_lock);
>  			continue;
> +		}
>  
> -		mutex_lock(&target->state_lock);
>  		event.subsys_name = target->name;
>  		event.ssr_event = target->state;
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index a9f04dd83ab6..57dde2a69b9d 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -512,10 +512,12 @@  static int sysmon_start(struct rproc_subdev *subdev)
 
 	mutex_lock(&sysmon_lock);
 	list_for_each_entry(target, &sysmon_list, node) {
-		if (target == sysmon)
+		mutex_lock(&target->state_lock);
+		if (target == sysmon || target->state != SSCTL_SSR_EVENT_AFTER_POWERUP) {
+			mutex_unlock(&target->state_lock);
 			continue;
+		}
 
-		mutex_lock(&target->state_lock);
 		event.subsys_name = target->name;
 		event.ssr_event = target->state;