@@ -40,6 +40,8 @@ config KEYBOARD_ADP5520
config KEYBOARD_ADP5588
tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
depends on I2C
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
help
Say Y here if you want to use a ADP5588/87 attached to your
system I2C bus.
@@ -46,15 +46,14 @@ struct adp5588_kpad {
ktime_t irq_time;
unsigned long delay;
unsigned short keycode[ADP5588_KEYMAPSIZE];
- const struct adp5588_gpi_map *gpimap;
- unsigned short gpimapsize;
-#ifdef CONFIG_GPIOLIB
unsigned char gpiomap[ADP5588_MAXGPIO];
struct gpio_chip gc;
+ struct irq_chip irq_chip;
struct mutex gpio_lock; /* Protect cached dir, dat_out */
u8 dat_out[3];
u8 dir[3];
-#endif
+ u8 int_en[3];
+ u8 irq_mask[3];
};
static int adp5588_read(struct i2c_client *client, u8 reg)
@@ -72,7 +71,6 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
return i2c_smbus_write_byte_data(client, reg, val);
}
-#ifdef CONFIG_GPIOLIB
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = gpiochip_get_data(chip);
@@ -171,9 +169,6 @@ static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
for (i = 0; i < pdata->cols; i++)
pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
- for (i = 0; i < kpad->gpimapsize; i++)
- pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
-
for (i = 0; i < ADP5588_MAXGPIO; i++)
if (!pin_used[i])
kpad->gpiomap[n_unused++] = i;
@@ -196,11 +191,63 @@ static void adp5588_gpio_do_teardown(void *_kpad)
dev_warn(&kpad->client->dev, "teardown failed %d\n", error);
}
+static void adp5588_irq_bus_lock(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct adp5588_kpad *kpad = gpiochip_get_data(gc);
+
+ mutex_lock(&kpad->gpio_lock);
+}
+
+static void adp5588_irq_bus_sync_unlock(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct adp5588_kpad *kpad = gpiochip_get_data(gc);
+ int i;
+
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+ if (kpad->int_en[i] ^ kpad->irq_mask[i]) {
+ kpad->int_en[i] = kpad->irq_mask[i];
+ adp5588_write(kpad->client, GPI_EM1 + i, kpad->int_en[i]);
+ }
+ }
+
+ mutex_unlock(&kpad->gpio_lock);
+}
+
+static void adp5588_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct adp5588_kpad *kpad = gpiochip_get_data(gc);
+ unsigned long real_irq = kpad->gpiomap[d->hwirq];
+
+ kpad->irq_mask[ADP5588_BANK(real_irq)] &= ~ADP5588_BIT(real_irq);
+}
+
+static void adp5588_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct adp5588_kpad *kpad = gpiochip_get_data(gc);
+ unsigned long real_irq = kpad->gpiomap[d->hwirq];
+
+ kpad->irq_mask[ADP5588_BANK(real_irq)] |= ADP5588_BIT(real_irq);
+}
+
+static int adp5588_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ if (!(type & IRQ_TYPE_EDGE_BOTH))
+ return -EINVAL;
+
+ return 0;
+}
+
static int adp5588_gpio_add(struct adp5588_kpad *kpad)
{
+ struct irq_chip *irq_chip = &kpad->irq_chip;
struct device *dev = &kpad->client->dev;
const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+ struct gpio_irq_chip *girq;
int i, error;
if (!gpio_data)
@@ -212,6 +259,8 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
return 0;
}
+ kpad->gc.parent = &kpad->client->dev;
+ kpad->gc.of_node = kpad->client->dev.of_node;
kpad->gc.direction_input = adp5588_gpio_direction_input;
kpad->gc.direction_output = adp5588_gpio_direction_output;
kpad->gc.get = adp5588_gpio_get_value;
@@ -223,6 +272,18 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
kpad->gc.owner = THIS_MODULE;
kpad->gc.names = gpio_data->names;
+ irq_chip->name = "adp5588";
+ irq_chip->irq_mask = adp5588_irq_mask;
+ irq_chip->irq_unmask = adp5588_irq_unmask;
+ irq_chip->irq_bus_lock = adp5588_irq_bus_lock;
+ irq_chip->irq_bus_sync_unlock = adp5588_irq_bus_sync_unlock;
+ irq_chip->irq_set_type = adp5588_irq_set_type;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE;
+ girq = &kpad->gc.irq;
+ girq->chip = irq_chip;
+ girq->handler = handle_simple_irq;
+ girq->threaded = true;
+
mutex_init(&kpad->gpio_lock);
error = devm_gpiochip_add_data(dev, &kpad->gc, kpad);
@@ -255,35 +316,70 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
return 0;
}
-#else
-static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
+static int adp5588_gpiomap_get_hwirq(const u8 *map, unsigned int gpio,
+ unsigned int ngpios)
{
- return 0;
+ unsigned int hwirq;
+
+ for (hwirq = 0; hwirq < ngpios; hwirq++)
+ if (map[hwirq] == gpio)
+ return hwirq;
+
+ /* should never happen */
+ WARN_ON_ONCE(hwirq == ngpios);
+
+ return -ENOENT;
+}
+
+static void adp5588_gpio_irq_handle(struct adp5588_kpad *kpad, int key_val,
+ int key_press)
+{
+ unsigned int irq, gpio = key_val - GPI_PIN_BASE, irq_type, hwirq;
+ struct i2c_client *client = kpad->client;
+ struct irq_data *desc;
+
+ hwirq = adp5588_gpiomap_get_hwirq(kpad->gpiomap, gpio, kpad->gc.ngpio);
+ if (hwirq < 0) {
+ dev_err(&client->dev, "Could not get hwirq for key(%u)\n", key_val);
+ return;
+ }
+
+ irq = irq_find_mapping(kpad->gc.irq.domain, hwirq);
+ if (irq <= 0)
+ return;
+
+ desc = irq_get_irq_data(irq);
+ if (!desc) {
+ dev_err(&client->dev, "Could not get irq(%u) data\n", irq);
+ return;
+ }
+
+ irq_type = irqd_get_trigger_type(desc);
+
+ /*
+ * Default is active low which means key_press is asserted on
+ * the falling edge.
+ */
+ if ((irq_type & IRQ_TYPE_EDGE_RISING && !key_press) ||
+ (irq_type & IRQ_TYPE_EDGE_FALLING && key_press))
+ handle_nested_irq(irq);
}
-#endif
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
{
- int i, j;
+ int i;
for (i = 0; i < ev_cnt; i++) {
int key = adp5588_read(kpad->client, Key_EVENTA + i);
int key_val = key & KEY_EV_MASK;
+ int key_press = key & KEY_EV_PRESSED;
- if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
- for (j = 0; j < kpad->gpimapsize; j++) {
- if (key_val == kpad->gpimap[j].pin) {
- input_report_switch(kpad->input,
- kpad->gpimap[j].sw_evt,
- key & KEY_EV_PRESSED);
- break;
- }
- }
- } else {
+ if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END)
+ /* gpio line used as IRQ source */
+ adp5588_gpio_irq_handle(kpad, key_val, key_press);
+ else
input_report_key(kpad->input,
- kpad->keycode[key_val - 1],
- key & KEY_EV_PRESSED);
- }
+ kpad->keycode[key_val - 1], key_press);
}
}
@@ -341,7 +437,6 @@ static int adp5588_setup(struct i2c_client *client)
dev_get_platdata(&client->dev);
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
int i, ret;
- unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
@@ -356,23 +451,6 @@ static int adp5588_setup(struct i2c_client *client)
for (i = 0; i < KEYP_MAX_EVENT; i++)
ret |= adp5588_read(client, Key_EVENTA);
- for (i = 0; i < pdata->gpimapsize; i++) {
- unsigned short pin = pdata->gpimap[i].pin;
-
- if (pin <= GPI_PIN_ROW_END) {
- evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
- } else {
- evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
- evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
- }
- }
-
- if (pdata->gpimapsize) {
- ret |= adp5588_write(client, GPI_EM1, evt_mode1);
- ret |= adp5588_write(client, GPI_EM2, evt_mode2);
- ret |= adp5588_write(client, GPI_EM3, evt_mode3);
- }
-
if (gpio_data) {
for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
int pull_mask = gpio_data->pullup_dis_mask;
@@ -399,44 +477,6 @@ static int adp5588_setup(struct i2c_client *client)
return 0;
}
-static void adp5588_report_switch_state(struct adp5588_kpad *kpad)
-{
- int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
- int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
- int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
- int gpi_stat_tmp, pin_loc;
- int i;
-
- for (i = 0; i < kpad->gpimapsize; i++) {
- unsigned short pin = kpad->gpimap[i].pin;
-
- if (pin <= GPI_PIN_ROW_END) {
- gpi_stat_tmp = gpi_stat1;
- pin_loc = pin - GPI_PIN_ROW_BASE;
- } else if ((pin - GPI_PIN_COL_BASE) < 8) {
- gpi_stat_tmp = gpi_stat2;
- pin_loc = pin - GPI_PIN_COL_BASE;
- } else {
- gpi_stat_tmp = gpi_stat3;
- pin_loc = pin - GPI_PIN_COL_BASE - 8;
- }
-
- if (gpi_stat_tmp < 0) {
- dev_err(&kpad->client->dev,
- "Can't read GPIO_DAT_STAT switch %d default to OFF\n",
- pin);
- gpi_stat_tmp = 0;
- }
-
- input_report_switch(kpad->input,
- kpad->gpimap[i].sw_evt,
- !(gpi_stat_tmp & (1 << pin_loc)));
- }
-
- input_sync(kpad->input);
-}
-
-
static int adp5588_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -469,37 +509,6 @@ static int adp5588_probe(struct i2c_client *client,
return -EINVAL;
}
- if (!pdata->gpimap && pdata->gpimapsize) {
- dev_err(&client->dev, "invalid gpimap from pdata\n");
- return -EINVAL;
- }
-
- if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
- dev_err(&client->dev, "invalid gpimapsize\n");
- return -EINVAL;
- }
-
- for (i = 0; i < pdata->gpimapsize; i++) {
- unsigned short pin = pdata->gpimap[i].pin;
-
- if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
- dev_err(&client->dev, "invalid gpi pin data\n");
- return -EINVAL;
- }
-
- if (pin <= GPI_PIN_ROW_END) {
- if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
- dev_err(&client->dev, "invalid gpi row data\n");
- return -EINVAL;
- }
- } else {
- if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
- dev_err(&client->dev, "invalid gpi col data\n");
- return -EINVAL;
- }
- }
- }
-
if (!client->irq) {
dev_err(&client->dev, "no IRQ?\n");
return -EINVAL;
@@ -541,9 +550,6 @@ static int adp5588_probe(struct i2c_client *client,
memcpy(kpad->keycode, pdata->keymap,
pdata->keymapsize * input->keycodesize);
- kpad->gpimap = pdata->gpimap;
- kpad->gpimapsize = pdata->gpimapsize;
-
/* setup input device */
__set_bit(EV_KEY, input->evbit);
@@ -555,11 +561,6 @@ static int adp5588_probe(struct i2c_client *client,
__set_bit(kpad->keycode[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
- if (kpad->gpimapsize)
- __set_bit(EV_SW, input->evbit);
- for (i = 0; i < kpad->gpimapsize; i++)
- __set_bit(kpad->gpimap[i].sw_evt, input->swbit);
-
error = input_register_device(input);
if (error) {
dev_err(&client->dev, "unable to register input device: %d\n",
@@ -567,6 +568,14 @@ static int adp5588_probe(struct i2c_client *client,
return error;
}
+ error = adp5588_setup(client);
+ if (error)
+ return error;
+
+ error = adp5588_gpio_add(kpad);
+ if (error)
+ return error;
+
error = devm_request_threaded_irq(&client->dev, client->irq,
adp5588_hard_irq, adp5588_thread_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
@@ -577,17 +586,6 @@ static int adp5588_probe(struct i2c_client *client,
return error;
}
- error = adp5588_setup(client);
- if (error)
- return error;
-
- if (kpad->gpimapsize)
- adp5588_report_switch_state(kpad);
-
- error = adp5588_gpio_add(kpad);
- if (error)
- return error;
-
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
return 0;
}
@@ -147,8 +147,6 @@ struct adp5588_kpad_platform_data {
unsigned en_keylock:1; /* Enable Key Lock feature */
unsigned short unlock_key1; /* Unlock Key 1 */
unsigned short unlock_key2; /* Unlock Key 2 */
- const struct adp5588_gpi_map *gpimap;
- unsigned short gpimapsize;
const struct adp5588_gpio_platform_data *gpio_data;
};
This change replaces the support for GPIs as key event generators. Instead of reporting the events directly, we add a gpio based irqchip so that these events can be consumed by keys defined in the gpio-keys driver (as it's goal is indeed for keys on GPIOs capable of generating interrupts). With this, the gpio-adp5588 driver can also be dropped. The basic idea is that all the pins that are not being used as part of the keymap matrix can be possibly requested as GPIOs by gpio-keys (it's also fine to use these pins as plain interrupts though that's not really the point). Since the gpiochip now also has irqchip capabilities, we should only remove it after we free the device interrupt (otherwise we could, in theory, be handling GPIs interrupts while the gpiochip is concurrently removed). Thus the call 'adp5588_gpio_add()' is moved and since the setup phase also needs to come before making the gpios visible, we also need to move 'adp5588_setup()'. While at it, always select GPIOLIB so that we don't need to use #ifdef guards. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- drivers/input/keyboard/Kconfig | 2 + drivers/input/keyboard/adp5588-keys.c | 262 +++++++++++++------------- include/linux/platform_data/adp5588.h | 2 - 3 files changed, 132 insertions(+), 134 deletions(-)