diff mbox series

[V2,12/16] smartpqi: add module param to disable managed ints

Message ID 165730606638.177165.12846020942931640329.stgit@brunhilda
State New
Headers show
Series smartpqi updates | expand

Commit Message

Don Brace July 8, 2022, 6:47 p.m. UTC 
From: Mike McGowen <Mike.McGowen@microchip.com>

Allow SMP affinity to be changeable by disabling managed interrupts.

On distributions where the driver is enabled for multi-queue support the
driver utilizes kernel managed interrupts, which automatically distributes
interrupts to all available CPUs and assigns SMP affinity.

On most distributions, the affinity can not be changed by the user.

This change will allow managed interrupts to be disabled by the user via a
module parameter while still allowing multi-queue support to function
properly.

Use the module parameter disable_managed_interrupts=1

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi.h      |    2 +-
 drivers/scsi/smartpqi/smartpqi_init.c |   13 ++++++++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index f1145ded843e..49d3a8a275f3 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -1351,7 +1351,7 @@  struct pqi_ctrl_info {
 	u8		enable_r6_writes : 1;
 	u8		lv_drive_type_mix_valid : 1;
 	u8		enable_stream_detection : 1;
-
+	u8		disable_managed_interrupts : 1;
 	u8		ciss_report_log_flags;
 	u32		max_transfer_encrypted_sas_sata;
 	u32		max_transfer_encrypted_nvme;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index e07282ed0f34..2df1e8453029 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -175,6 +175,12 @@  module_param_named(hide_vsep,
 	pqi_hide_vsep, int, 0644);
 MODULE_PARM_DESC(hide_vsep, "Hide the virtual SEP for direct attached drives.");
 
+static int pqi_disable_managed_interrupts;
+module_param_named(disable_managed_interrupts,
+	pqi_disable_managed_interrupts, int, 0644);
+MODULE_PARM_DESC(disable_managed_interrupts,
+	"Disable the kernel automatically assigning SMP affinity to IRQs.");
+
 static char *raid_levels[] = {
 	"RAID-0",
 	"RAID-4",
@@ -4039,10 +4045,14 @@  static void pqi_free_irqs(struct pqi_ctrl_info *ctrl_info)
 static int pqi_enable_msix_interrupts(struct pqi_ctrl_info *ctrl_info)
 {
 	int num_vectors_enabled;
+	unsigned int flags = PCI_IRQ_MSIX;
+
+	if (!pqi_disable_managed_interrupts)
+		flags |= PCI_IRQ_AFFINITY;
 
 	num_vectors_enabled = pci_alloc_irq_vectors(ctrl_info->pci_dev,
 			PQI_MIN_MSIX_VECTORS, ctrl_info->num_queue_groups,
-			PCI_IRQ_MSIX | PCI_IRQ_AFFINITY);
+			flags);
 	if (num_vectors_enabled < 0) {
 		dev_err(&ctrl_info->pci_dev->dev,
 			"MSI-X init failed with error %d\n",
@@ -8588,6 +8598,7 @@  static struct pqi_ctrl_info *pqi_alloc_ctrl_info(int numa_node)
 	ctrl_info->max_write_raid_5_6 = PQI_DEFAULT_MAX_WRITE_RAID_5_6;
 	ctrl_info->max_write_raid_1_10_2drive = ~0;
 	ctrl_info->max_write_raid_1_10_3drive = ~0;
+	ctrl_info->disable_managed_interrupts = pqi_disable_managed_interrupts;
 
 	return ctrl_info;
 }