diff mbox series

[6/7] arm64: dts: qcom: sc7280: reorder USB interrupts

Message ID 20220713131340.29401-7-johan+linaro@kernel.org
State Superseded
Headers show
Series usb: dwc3: add support for SC8280XP | expand

Commit Message

Johan Hovold July 13, 2022, 1:13 p.m. UTC
Only one of the USB controllers supports SuperSpeed and have an SS PHY
wakeup interrupt.

Reorder the interrupts so that they match the updated binding which
specifically has the optional interrupt last.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

Comments

Krzysztof Kozlowski July 14, 2022, 10:54 a.m. UTC | #1
On 13/07/2022 15:13, Johan Hovold wrote:
> Only one of the USB controllers supports SuperSpeed and have an SS PHY
> wakeup interrupt.
> 
> Reorder the interrupts so that they match the updated binding which
> specifically has the optional interrupt last.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ef431c954ab5..1e739ba1923d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3174,10 +3174,11 @@  usb_2: usb@8cf8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-				     <&pdc 13 IRQ_TYPE_EDGE_RISING>,
-				     <&pdc 12 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "hs_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
 
 			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
 
@@ -3357,13 +3358,13 @@  usb_1: usb@a6f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;