diff mbox series

[v5,11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

Message ID 20220715112607.591-12-peterwu.pub@gmail.com
State New
Headers show
Series Add MediaTek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu July 15, 2022, 11:26 a.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual
Flash LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.

In MediaTek MT6370, there are four channel current-sink RGB LEDs that
support hardware pattern for constant current, PWM, and breath mode.
Isink4 channel can also be used as a CHG_VIN power good indicator.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
 drivers/leds/Kconfig       |  14 +
 drivers/leds/Makefile      |   1 +
 drivers/leds/leds-mt6370.c | 994 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1009 insertions(+)
 create mode 100644 drivers/leds/leds-mt6370.c

Comments

Pavel Machek July 17, 2022, 8:46 a.m. UTC | #1
Hi!

> The MediaTek MT6370 is a highly-integrated smart power management IC,
> which includes a single cell Li-Ion/Li-Polymer switching battery
> charger, a USB Type-C & Power Delivery (PD) controller, dual
> Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> a display bias driver and a general LDO for portable devices.
> 
> In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> support hardware pattern for constant current, PWM, and breath mode.
> Isink4 channel can also be used as a CHG_VIN power good indicator.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>

> index a49979f..71bacb5 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -244,6 +244,20 @@ config LEDS_MT6323
>  	  This option enables support for on-chip LED drivers found on
>  	  Mediatek MT6323 PMIC.
>  
> +config LEDS_MT6370_RGB
> +	tristate "LED Support for MediaTek MT6370 PMIC"
> +	depends on LEDS_CLASS
> +	depends on MFD_MT6370
> +	select LINEAR_RANGE
> +	help
> +	  Say Y here to enable support for MT6370_RGB LED device.
> +	  In MT6370, there are four channel current-sink LED drivers that
> +	  support hardware pattern for constant current, PWM, and breath mode.
> +	  Isink4 channel can also be used as a CHG_VIN power good

Should this go to leds/rgb directory, and should it depend on
multicolor framework?

Best regards,
							Pavel
cy_huang July 20, 2022, 9:45 a.m. UTC | #2
On Fri, Jul 15, 2022 at 08:29:42PM +0200, Andy Shevchenko wrote:
> On Fri, Jul 15, 2022 at 1:29 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> >
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > which includes a single cell Li-Ion/Li-Polymer switching battery
> > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > a display bias driver and a general LDO for portable devices.
> >
> > In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> > support hardware pattern for constant current, PWM, and breath mode.
> > Isink4 channel can also be used as a CHG_VIN power good indicator.
> 
> ...
> 
> > +         This driver can also be built as a module. If so the module
> 
> so, the
> 
> > +         will be called "leds-mt6370.ko".
> 
> No ".ko".
> 
> Why did you ignore these comments? Please go and fix _everywhere_ in
> your series.
> It's basically the rule of thumb, if the reviewer gives a comment
> against an occurrence of something, go through entire series and check
> if there are other places like commented one and address them all.
> 
> ...
> 
> > + * Author: Alice Chen <alice_chen@richtek.com>
> 
> Strange, the commit message doesn't have a corresponding SoB, why?
> 
Yes, there're two authors Alice and me.
I'll correct it in next.
> ...
> 
> > +#define MT6370_PWM_DUTY                                31
> > +#define MT6372_PMW_DUTY                                255
> 
> Looks like these are limits by hardware?
> Check with the datasheet if (BIT(x) - 1) makes more sense here.
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +               sel_field = F_LED1_DUTY;
> > +               break;
> > +       case MT6370_LED_ISNK2:
> > +               sel_field = F_LED2_DUTY;
> > +               break;
> > +       case MT6370_LED_ISNK3:
> > +               sel_field = F_LED3_DUTY;
> > +               break;
> > +       default:
> > +               sel_field = F_LED4_DUTY;
> 
> Missed break;
> 
> > +       }
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +               sel_field = F_LED1_FREQ;
> > +               break;
> > +       case MT6370_LED_ISNK2:
> > +               sel_field = F_LED2_FREQ;
> > +               break;
> > +       case MT6370_LED_ISNK3:
> > +               sel_field = F_LED3_FREQ;
> > +               break;
> > +       default:
> > +               sel_field = F_LED4_FREQ;
> 
> Ditto.
> 
> > +       }
> 
> ...
> 
> > +       switch (led_no) {
> > +       case MT6370_LED_ISNK1:
> > +       case MT6370_LED_ISNK2:
> > +       case MT6370_LED_ISNK3:
> > +               *base = MT6370_REG_RGB1_TR + led_no * 3;
> > +               break;
> > +       default:
> > +               *base = MT6370_REG_RGB_CHRIND_TR;
> 
> Ditto.
> It seems you dropped them for all switch-cases. It's not goot, please
> restore them back.
> 
> > +       }
> 
> ...
> 
> > +       u8 val[P_MAX_PATTERNS / 2] = {0};
> 
> { } should suffice
> 
> 
In the above range selector, we use the 'logic or' to generate the
pattern values.

If to change it from '{0} to '{ }', is it correct?
> > +       /*
> > +        * Pattern list
> > +        * tr1: byte 0, b'[7: 4]
> > +        * tr2: byte 0, b'[3: 0]
> > +        * tf1: byte 1, b'[7: 4]
> > +        * tf2: byte 1, b'[3: 0]
> > +        * ton: byte 2, b'[7: 4]
> > +        * toff: byte 2, b'[3: 0]
> > +        */
> > +       for (i = 0; i < P_MAX_PATTERNS; i++) {
> > +               curr = pattern + i;
> > +
> > +               sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
> > +
> > +               linear_range_get_selector_within(priv->ranges + sel_range,
> > +                                                curr->delta_t, &sel);
> > +
> > +               val[i / 2] |= sel << (4 * ((i + 1) % 2));
> > +       }
> > +
> > +       memcpy(pattern_val, val, 3);
> > +       return 0;
> > +}
> 
> ...
> 
> > +out:
> 
> out_unlock:
> 
> > +       mutex_unlock(&priv->lock);
> > +
> > +       return ret;
> 
> ...
> 
> > +out:
> 
> Ditto. And so on.
> 
> > +       mutex_unlock(&priv->lock);
> > +
> > +       return ret;
> 
> ...
> 
> > +               sub_led = devm_kzalloc(priv->dev,
> > +                                      sizeof(*sub_led) * MC_CHANNEL_NUM,
> > +                                      GFP_KERNEL);
> 
> NIH devm_kcalloc(). Also check if you really need zeroed data.
>
Ok, and after the check, I also need to add one line to set the intensity to 0.
> > +               if (!sub_led)
> > +                       return -ENOMEM;
> 
> ...
> 
> > +                       ret = fwnode_property_read_u32(child, "color", &color);
> > +                       if (ret) {
> > +                               dev_err(priv->dev,
> > +                                       "led %d, no color specified\n",
> > +                                       led->index);
> > +                               return ret;
> 
> return dev_err_probe(...) ; ?
> 
> Ditto for many places in your entire series.
> 
> > +                       }
> 
> ...
> 
> > +       priv = devm_kzalloc(&pdev->dev,
> > +                           struct_size(priv, leds, count), GFP_KERNEL);
> 
> At least one parameter can be placed on the previous line.
> 
> > +       if (!priv)
> > +               return -ENOMEM;
> 
> -- 
> With Best Regards,
> Andy Shevchenko
cy_huang July 20, 2022, 9:48 a.m. UTC | #3
ChiYuan Huang <u0084500@gmail.com> 於 2022年7月20日 週三 下午5:45寫道:
>
> On Fri, Jul 15, 2022 at 08:29:42PM +0200, Andy Shevchenko wrote:
> > On Fri, Jul 15, 2022 at 1:29 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> > >
> > > From: ChiYuan Huang <cy_huang@richtek.com>
> > >
> > > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > > which includes a single cell Li-Ion/Li-Polymer switching battery
> > > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > > a display bias driver and a general LDO for portable devices.
> > >
> > > In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> > > support hardware pattern for constant current, PWM, and breath mode.
> > > Isink4 channel can also be used as a CHG_VIN power good indicator.
> >
> > ...
> >
> > > +         This driver can also be built as a module. If so the module
> >
> > so, the
> >
> > > +         will be called "leds-mt6370.ko".
> >
> > No ".ko".
> >
> > Why did you ignore these comments? Please go and fix _everywhere_ in
> > your series.
> > It's basically the rule of thumb, if the reviewer gives a comment
> > against an occurrence of something, go through entire series and check
> > if there are other places like commented one and address them all.
> >
> > ...
> >
> > > + * Author: Alice Chen <alice_chen@richtek.com>
> >
> > Strange, the commit message doesn't have a corresponding SoB, why?
> >
> Yes, there're two authors Alice and me.
> I'll correct it in next.
> > ...
> >
> > > +#define MT6370_PWM_DUTY                                31
> > > +#define MT6372_PMW_DUTY                                255
> >
> > Looks like these are limits by hardware?
> > Check with the datasheet if (BIT(x) - 1) makes more sense here.
> >
> > ...
> >
> > > +       switch (led_no) {
> > > +       case MT6370_LED_ISNK1:
> > > +               sel_field = F_LED1_DUTY;
> > > +               break;
> > > +       case MT6370_LED_ISNK2:
> > > +               sel_field = F_LED2_DUTY;
> > > +               break;
> > > +       case MT6370_LED_ISNK3:
> > > +               sel_field = F_LED3_DUTY;
> > > +               break;
> > > +       default:
> > > +               sel_field = F_LED4_DUTY;
> >
> > Missed break;
> >
> > > +       }
> >
> > ...
> >
> > > +       switch (led_no) {
> > > +       case MT6370_LED_ISNK1:
> > > +               sel_field = F_LED1_FREQ;
> > > +               break;
> > > +       case MT6370_LED_ISNK2:
> > > +               sel_field = F_LED2_FREQ;
> > > +               break;
> > > +       case MT6370_LED_ISNK3:
> > > +               sel_field = F_LED3_FREQ;
> > > +               break;
> > > +       default:
> > > +               sel_field = F_LED4_FREQ;
> >
> > Ditto.
> >
> > > +       }
> >
> > ...
> >
> > > +       switch (led_no) {
> > > +       case MT6370_LED_ISNK1:
> > > +       case MT6370_LED_ISNK2:
> > > +       case MT6370_LED_ISNK3:
> > > +               *base = MT6370_REG_RGB1_TR + led_no * 3;
> > > +               break;
> > > +       default:
> > > +               *base = MT6370_REG_RGB_CHRIND_TR;
> >
> > Ditto.
> > It seems you dropped them for all switch-cases. It's not goot, please
> > restore them back.
> >
> > > +       }
> >
> > ...
> >
> > > +       u8 val[P_MAX_PATTERNS / 2] = {0};
> >
> > { } should suffice
> >
> >
> In the above range selector, we use the 'logic or' to generate the
typo, it's 'below'.
> pattern values.
>
> If to change it from '{0} to '{ }', is it correct?
> > > +       /*
> > > +        * Pattern list
> > > +        * tr1: byte 0, b'[7: 4]
> > > +        * tr2: byte 0, b'[3: 0]
> > > +        * tf1: byte 1, b'[7: 4]
> > > +        * tf2: byte 1, b'[3: 0]
> > > +        * ton: byte 2, b'[7: 4]
> > > +        * toff: byte 2, b'[3: 0]
> > > +        */
> > > +       for (i = 0; i < P_MAX_PATTERNS; i++) {
> > > +               curr = pattern + i;
> > > +
> > > +               sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
> > > +
> > > +               linear_range_get_selector_within(priv->ranges + sel_range,
> > > +                                                curr->delta_t, &sel);
> > > +
> > > +               val[i / 2] |= sel << (4 * ((i + 1) % 2));
> > > +       }
> > > +
> > > +       memcpy(pattern_val, val, 3);
> > > +       return 0;
> > > +}
> >
> > ...
> >
> > > +out:
> >
> > out_unlock:
> >
> > > +       mutex_unlock(&priv->lock);
> > > +
> > > +       return ret;
> >
> > ...
> >
> > > +out:
> >
> > Ditto. And so on.
> >
> > > +       mutex_unlock(&priv->lock);
> > > +
> > > +       return ret;
> >
> > ...
> >
> > > +               sub_led = devm_kzalloc(priv->dev,
> > > +                                      sizeof(*sub_led) * MC_CHANNEL_NUM,
> > > +                                      GFP_KERNEL);
> >
> > NIH devm_kcalloc(). Also check if you really need zeroed data.
> >
> Ok, and after the check, I also need to add one line to set the intensity to 0.
> > > +               if (!sub_led)
> > > +                       return -ENOMEM;
> >
> > ...
> >
> > > +                       ret = fwnode_property_read_u32(child, "color", &color);
> > > +                       if (ret) {
> > > +                               dev_err(priv->dev,
> > > +                                       "led %d, no color specified\n",
> > > +                                       led->index);
> > > +                               return ret;
> >
> > return dev_err_probe(...) ; ?
> >
> > Ditto for many places in your entire series.
> >
> > > +                       }
> >
> > ...
> >
> > > +       priv = devm_kzalloc(&pdev->dev,
> > > +                           struct_size(priv, leds, count), GFP_KERNEL);
> >
> > At least one parameter can be placed on the previous line.
> >
> > > +       if (!priv)
> > > +               return -ENOMEM;
> >
> > --
> > With Best Regards,
> > Andy Shevchenko
cy_huang July 21, 2022, 9:31 a.m. UTC | #4
ChiYuan Huang <u0084500@gmail.com> 於 2022年7月20日 週三 下午5:48寫道:
>
> ChiYuan Huang <u0084500@gmail.com> 於 2022年7月20日 週三 下午5:45寫道:
> >
> > On Fri, Jul 15, 2022 at 08:29:42PM +0200, Andy Shevchenko wrote:
> > > On Fri, Jul 15, 2022 at 1:29 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> > > >
> > > > From: ChiYuan Huang <cy_huang@richtek.com>
> > > >
> > > > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > > > which includes a single cell Li-Ion/Li-Polymer switching battery
> > > > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > > > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > > > a display bias driver and a general LDO for portable devices.
> > > >
> > > > In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> > > > support hardware pattern for constant current, PWM, and breath mode.
> > > > Isink4 channel can also be used as a CHG_VIN power good indicator.
> > >
> > > ...
> > >
> > > > +         This driver can also be built as a module. If so the module
> > >
> > > so, the
> > >
> > > > +         will be called "leds-mt6370.ko".
> > >
> > > No ".ko".
> > >
> > > Why did you ignore these comments? Please go and fix _everywhere_ in
> > > your series.
> > > It's basically the rule of thumb, if the reviewer gives a comment
> > > against an occurrence of something, go through entire series and check
> > > if there are other places like commented one and address them all.
> > >
> > > ...
> > >
> > > > + * Author: Alice Chen <alice_chen@richtek.com>
> > >
> > > Strange, the commit message doesn't have a corresponding SoB, why?
> > >
> > Yes, there're two authors Alice and me.
> > I'll correct it in next.
> > > ...
> > >
> > > > +#define MT6370_PWM_DUTY                                31
> > > > +#define MT6372_PMW_DUTY                                255
> > >
> > > Looks like these are limits by hardware?
> > > Check with the datasheet if (BIT(x) - 1) makes more sense here.
> > >
> > > ...
> > >
> > > > +       switch (led_no) {
> > > > +       case MT6370_LED_ISNK1:
> > > > +               sel_field = F_LED1_DUTY;
> > > > +               break;
> > > > +       case MT6370_LED_ISNK2:
> > > > +               sel_field = F_LED2_DUTY;
> > > > +               break;
> > > > +       case MT6370_LED_ISNK3:
> > > > +               sel_field = F_LED3_DUTY;
> > > > +               break;
> > > > +       default:
> > > > +               sel_field = F_LED4_DUTY;
> > >
> > > Missed break;
> > >
> > > > +       }
> > >
> > > ...
> > >
> > > > +       switch (led_no) {
> > > > +       case MT6370_LED_ISNK1:
> > > > +               sel_field = F_LED1_FREQ;
> > > > +               break;
> > > > +       case MT6370_LED_ISNK2:
> > > > +               sel_field = F_LED2_FREQ;
> > > > +               break;
> > > > +       case MT6370_LED_ISNK3:
> > > > +               sel_field = F_LED3_FREQ;
> > > > +               break;
> > > > +       default:
> > > > +               sel_field = F_LED4_FREQ;
> > >
> > > Ditto.
> > >
> > > > +       }
> > >
> > > ...
> > >
> > > > +       switch (led_no) {
> > > > +       case MT6370_LED_ISNK1:
> > > > +       case MT6370_LED_ISNK2:
> > > > +       case MT6370_LED_ISNK3:
> > > > +               *base = MT6370_REG_RGB1_TR + led_no * 3;
> > > > +               break;
> > > > +       default:
> > > > +               *base = MT6370_REG_RGB_CHRIND_TR;
> > >
> > > Ditto.
> > > It seems you dropped them for all switch-cases. It's not goot, please
> > > restore them back.
> > >
> > > > +       }
> > >
> > > ...
> > >
> > > > +       u8 val[P_MAX_PATTERNS / 2] = {0};
> > >
> > > { } should suffice
> > >
> > >
> > In the above range selector, we use the 'logic or' to generate the
> typo, it's 'below'.
> > pattern values.
> >
Ah, found in c11 standard 6.7.9 item 21
It is the same as 'static storage duration'.
I will follow your comment to revise it.
Thanks.
> > If to change it from '{0} to '{ }', is it correct?
> > > > +       /*
> > > > +        * Pattern list
> > > > +        * tr1: byte 0, b'[7: 4]
> > > > +        * tr2: byte 0, b'[3: 0]
> > > > +        * tf1: byte 1, b'[7: 4]
> > > > +        * tf2: byte 1, b'[3: 0]
> > > > +        * ton: byte 2, b'[7: 4]
> > > > +        * toff: byte 2, b'[3: 0]
> > > > +        */
> > > > +       for (i = 0; i < P_MAX_PATTERNS; i++) {
> > > > +               curr = pattern + i;
> > > > +
> > > > +               sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
> > > > +
> > > > +               linear_range_get_selector_within(priv->ranges + sel_range,
> > > > +                                                curr->delta_t, &sel);
> > > > +
> > > > +               val[i / 2] |= sel << (4 * ((i + 1) % 2));
> > > > +       }
> > > > +
> > > > +       memcpy(pattern_val, val, 3);
> > > > +       return 0;
> > > > +}
> > >
> > > ...
> > >
> > > > +out:
> > >
> > > out_unlock:
> > >
> > > > +       mutex_unlock(&priv->lock);
> > > > +
> > > > +       return ret;
> > >
> > > ...
> > >
> > > > +out:
> > >
> > > Ditto. And so on.
> > >
> > > > +       mutex_unlock(&priv->lock);
> > > > +
> > > > +       return ret;
> > >
> > > ...
> > >
> > > > +               sub_led = devm_kzalloc(priv->dev,
> > > > +                                      sizeof(*sub_led) * MC_CHANNEL_NUM,
> > > > +                                      GFP_KERNEL);
> > >
> > > NIH devm_kcalloc(). Also check if you really need zeroed data.
> > >
> > Ok, and after the check, I also need to add one line to set the intensity to 0.
> > > > +               if (!sub_led)
> > > > +                       return -ENOMEM;
> > >
> > > ...
> > >
> > > > +                       ret = fwnode_property_read_u32(child, "color", &color);
> > > > +                       if (ret) {
> > > > +                               dev_err(priv->dev,
> > > > +                                       "led %d, no color specified\n",
> > > > +                                       led->index);
> > > > +                               return ret;
> > >
> > > return dev_err_probe(...) ; ?
> > >
> > > Ditto for many places in your entire series.
> > >
> > > > +                       }
> > >
> > > ...
> > >
> > > > +       priv = devm_kzalloc(&pdev->dev,
> > > > +                           struct_size(priv, leds, count), GFP_KERNEL);
> > >
> > > At least one parameter can be placed on the previous line.
> > >
> > > > +       if (!priv)
> > > > +               return -ENOMEM;
> > >
> > > --
> > > With Best Regards,
> > > Andy Shevchenko
cy_huang July 21, 2022, 10:09 a.m. UTC | #5
On Sun, Jul 17, 2022 at 10:46:43AM +0200, Pavel Machek wrote:
> Hi!
> 
> > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > which includes a single cell Li-Ion/Li-Polymer switching battery
> > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > a display bias driver and a general LDO for portable devices.
> > 
> > In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> > support hardware pattern for constant current, PWM, and breath mode.
> > Isink4 channel can also be used as a CHG_VIN power good indicator.
> > 
> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> 
> > index a49979f..71bacb5 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -244,6 +244,20 @@ config LEDS_MT6323
> >  	  This option enables support for on-chip LED drivers found on
> >  	  Mediatek MT6323 PMIC.
> >  
> > +config LEDS_MT6370_RGB
> > +	tristate "LED Support for MediaTek MT6370 PMIC"
> > +	depends on LEDS_CLASS
> > +	depends on MFD_MT6370
> > +	select LINEAR_RANGE
> > +	help
> > +	  Say Y here to enable support for MT6370_RGB LED device.
> > +	  In MT6370, there are four channel current-sink LED drivers that
> > +	  support hardware pattern for constant current, PWM, and breath mode.
> > +	  Isink4 channel can also be used as a CHG_VIN power good
> 
> Should this go to leds/rgb directory, and should it depend on
> multicolor framework?
Yes, and I may also want to change the file name from 'leds-mt6370'
to 'leds-mt6370-rgb'. Is it ok?
> 
> Best regards,
> 							Pavel
> -- 
> People of Russia, stop Putin before his war on Ukraine escalates.
diff mbox series

Patch

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a49979f..71bacb5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -244,6 +244,20 @@  config LEDS_MT6323
 	  This option enables support for on-chip LED drivers found on
 	  Mediatek MT6323 PMIC.
 
+config LEDS_MT6370_RGB
+	tristate "LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	select LINEAR_RANGE
+	help
+	  Say Y here to enable support for MT6370_RGB LED device.
+	  In MT6370, there are four channel current-sink LED drivers that
+	  support hardware pattern for constant current, PWM, and breath mode.
+	  Isink4 channel can also be used as a CHG_VIN power good indicator.
+
+	  This driver can also be built as a module. If so the module
+	  will be called "leds-mt6370.ko".
+
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4fd2f92..557be42 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -62,6 +62,7 @@  obj-$(CONFIG_LEDS_MIKROTIK_RB532)	+= leds-rb532.o
 obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
 obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
 obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
+obj-$(CONFIG_LEDS_MT6370_RGB)		+= leds-mt6370.o
 obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
diff --git a/drivers/leds/leds-mt6370.c b/drivers/leds/leds-mt6370.c
new file mode 100644
index 0000000..1038232
--- /dev/null
+++ b/drivers/leds/leds-mt6370.c
@@ -0,0 +1,994 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: Alice Chen <alice_chen@richtek.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/linear_range.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+enum {
+	MT6370_LED_ISNK1 = 0,
+	MT6370_LED_ISNK2,
+	MT6370_LED_ISNK3,
+	MT6370_LED_ISNK4,
+	MT6370_MAX_LEDS
+};
+
+enum mt6370_led_mode {
+	MT6370_LED_PWM_MODE = 0,
+	MT6370_LED_BREATH_MODE,
+	MT6370_LED_REG_MODE,
+	MT6370_LED_MAX_MODE
+};
+
+enum mt6370_led_field {
+	F_RGB_EN = 0,
+	F_CHGIND_EN,
+	F_LED1_CURR,
+	F_LED2_CURR,
+	F_LED3_CURR,
+	F_LED4_CURR,
+	F_LED1_MODE,
+	F_LED2_MODE,
+	F_LED3_MODE,
+	F_LED4_MODE,
+	F_LED1_DUTY,
+	F_LED2_DUTY,
+	F_LED3_DUTY,
+	F_LED4_DUTY,
+	F_LED1_FREQ,
+	F_LED2_FREQ,
+	F_LED3_FREQ,
+	F_LED4_FREQ,
+	F_MAX_FIELDS
+};
+
+enum mt6370_led_ranges {
+	R_LED123_CURR = 0,
+	R_LED4_CURR,
+	R_LED_TRFON,
+	R_LED_TOFF,
+	R_MAX_RANGES,
+};
+
+enum mt6370_pattern {
+	P_LED_TR1 = 0,
+	P_LED_TR2,
+	P_LED_TF1,
+	P_LED_TF2,
+	P_LED_TON,
+	P_LED_TOFF,
+	P_MAX_PATTERNS
+};
+
+#define MT6370_REG_DEV_INFO			0x100
+#define MT6370_REG_RGB1_DIM			0x182
+#define MT6370_REG_RGB2_DIM			0x183
+#define MT6370_REG_RGB3_DIM			0x184
+#define MT6370_REG_RGB_EN			0x185
+#define MT6370_REG_RGB1_ISNK			0x186
+#define MT6370_REG_RGB2_ISNK			0x187
+#define MT6370_REG_RGB3_ISNK			0x188
+#define MT6370_REG_RGB1_TR			0x189
+#define MT6370_REG_RGB_CHRIND_DIM		0x192
+#define MT6370_REG_RGB_CHRIND_CTRL		0x193
+#define MT6370_REG_RGB_CHRIND_TR		0x194
+
+#define MT6372_REG_RGB_EN			0x182
+#define MT6372_REG_RGB1_ISNK			0x183
+#define MT6372_REG_RGB2_ISNK			0x184
+#define MT6372_REG_RGB3_ISNK			0x185
+#define MT6372_REG_RGB4_ISNK			0x186
+#define MT6372_REG_RGB1_DIM			0x187
+#define MT6372_REG_RGB2_DIM			0x188
+#define MT6372_REG_RGB3_DIM			0x189
+#define MT6372_REG_RGB4_DIM			0x18A
+#define MT6372_REG_RGB12_FREQ			0x18B
+#define MT6372_REG_RGB34_FREQ			0x18C
+#define MT6372_REG_RGB1_TR			0x18D
+
+#define MT6370_VENID_MASK			GENMASK(7, 4)
+#define MT6370_CHEN_BIT(id)			BIT(MT6370_LED_ISNK4 - id)
+#define MT6370_VIRTUAL_MULTICOLOR		5
+#define MC_CHANNEL_NUM				3
+#define MT6370_PWM_DUTY				31
+#define MT6372_PMW_DUTY				255
+
+#define STATE_OFF				0
+#define STATE_KEEP				1
+#define STATE_ON				2
+
+struct mt6370_led {
+	union {
+		struct led_classdev isink;
+		struct led_classdev_mc mc;
+	};
+	struct mt6370_priv *priv;
+	u32 default_state;
+	u32 index;
+};
+
+struct mt6370_priv {
+	/* Per LED access lock */
+	struct mutex lock;
+	struct device *dev;
+	struct regmap *regmap;
+	struct regmap_field *fields[F_MAX_FIELDS];
+	const struct reg_field *reg_fields;
+	const struct linear_range *ranges;
+	struct reg_cfg *reg_cfgs;
+	unsigned int leds_count;
+	unsigned int leds_active;
+	bool is_mt6372;
+	struct mt6370_led leds[];
+};
+
+static const struct reg_field common_reg_fields[F_MAX_FIELDS] = {
+	[F_RGB_EN]	= REG_FIELD(MT6370_REG_RGB_EN, 4, 7),
+	[F_CHGIND_EN]	= REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 7, 7),
+	[F_LED1_CURR]	= REG_FIELD(MT6370_REG_RGB1_ISNK, 0, 2),
+	[F_LED2_CURR]	= REG_FIELD(MT6370_REG_RGB2_ISNK, 0, 2),
+	[F_LED3_CURR]	= REG_FIELD(MT6370_REG_RGB3_ISNK, 0, 2),
+	[F_LED4_CURR]	= REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 0, 1),
+	[F_LED1_MODE]	= REG_FIELD(MT6370_REG_RGB1_DIM, 5, 6),
+	[F_LED2_MODE]	= REG_FIELD(MT6370_REG_RGB2_DIM, 5, 6),
+	[F_LED3_MODE]	= REG_FIELD(MT6370_REG_RGB3_DIM, 5, 6),
+	[F_LED4_MODE]	= REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 5, 6),
+	[F_LED1_DUTY]	= REG_FIELD(MT6370_REG_RGB1_DIM, 0, 4),
+	[F_LED2_DUTY]	= REG_FIELD(MT6370_REG_RGB2_DIM, 0, 4),
+	[F_LED3_DUTY]	= REG_FIELD(MT6370_REG_RGB3_DIM, 0, 4),
+	[F_LED4_DUTY]	= REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 0, 4),
+	[F_LED1_FREQ]	= REG_FIELD(MT6370_REG_RGB1_ISNK, 3, 5),
+	[F_LED2_FREQ]	= REG_FIELD(MT6370_REG_RGB2_ISNK, 3, 5),
+	[F_LED3_FREQ]	= REG_FIELD(MT6370_REG_RGB3_ISNK, 3, 5),
+	[F_LED4_FREQ]	= REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 2, 4)
+};
+
+static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = {
+	[F_RGB_EN]	= REG_FIELD(MT6372_REG_RGB_EN, 4, 7),
+	[F_CHGIND_EN]	= REG_FIELD(MT6372_REG_RGB_EN, 3, 3),
+	[F_LED1_CURR]	= REG_FIELD(MT6372_REG_RGB1_ISNK, 0, 3),
+	[F_LED2_CURR]	= REG_FIELD(MT6372_REG_RGB2_ISNK, 0, 3),
+	[F_LED3_CURR]	= REG_FIELD(MT6372_REG_RGB3_ISNK, 0, 3),
+	[F_LED4_CURR]	= REG_FIELD(MT6372_REG_RGB4_ISNK, 0, 3),
+	[F_LED1_MODE]	= REG_FIELD(MT6372_REG_RGB1_ISNK, 6, 7),
+	[F_LED2_MODE]	= REG_FIELD(MT6372_REG_RGB2_ISNK, 6, 7),
+	[F_LED3_MODE]	= REG_FIELD(MT6372_REG_RGB3_ISNK, 6, 7),
+	[F_LED4_MODE]	= REG_FIELD(MT6372_REG_RGB4_ISNK, 6, 7),
+	[F_LED1_DUTY]	= REG_FIELD(MT6372_REG_RGB1_DIM, 0, 7),
+	[F_LED2_DUTY]	= REG_FIELD(MT6372_REG_RGB2_DIM, 0, 7),
+	[F_LED3_DUTY]	= REG_FIELD(MT6372_REG_RGB3_DIM, 0, 7),
+	[F_LED4_DUTY]	= REG_FIELD(MT6372_REG_RGB4_DIM, 0, 7),
+	[F_LED1_FREQ]	= REG_FIELD(MT6372_REG_RGB12_FREQ, 5, 7),
+	[F_LED2_FREQ]	= REG_FIELD(MT6372_REG_RGB12_FREQ, 2, 4),
+	[F_LED3_FREQ]	= REG_FIELD(MT6372_REG_RGB34_FREQ, 5, 7),
+	[F_LED4_FREQ]	= REG_FIELD(MT6372_REG_RGB34_FREQ, 2, 4)
+};
+
+/* Current unit: microamp, time unit: millisecond */
+static const struct linear_range common_led_ranges[R_MAX_RANGES] = {
+	[R_LED123_CURR]	= { 4000, 1, 6, 4000 },
+	[R_LED4_CURR]	= { 2000, 1, 3, 2000 },
+	[R_LED_TRFON]	= { 125, 0, 15, 200 },
+	[R_LED_TOFF]	= { 250, 0, 15, 400 }
+};
+
+static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = {
+	[R_LED123_CURR]	= { 2000, 1, 14, 2000 },
+	[R_LED4_CURR]	= { 2000, 1, 14, 2000 },
+	[R_LED_TRFON]	= { 125, 0, 15, 250 },
+	[R_LED_TOFF]	= { 250, 0, 15, 500 }
+};
+
+static enum mt6370_led_field mt6370_get_led_current_field(unsigned int led_no)
+{
+	switch (led_no) {
+	case MT6370_LED_ISNK1:
+		return F_LED1_CURR;
+	case MT6370_LED_ISNK2:
+		return F_LED2_CURR;
+	case MT6370_LED_ISNK3:
+		return F_LED3_CURR;
+	default:
+		return F_LED4_CURR;
+	}
+}
+
+static int mt6370_set_led_brightness(struct mt6370_priv *priv,
+				     unsigned int led_no, unsigned int level)
+{
+	enum mt6370_led_field sel_field;
+
+	sel_field = mt6370_get_led_current_field(led_no);
+
+	return regmap_field_write(priv->fields[sel_field], level);
+}
+
+static int mt6370_get_led_brightness(struct mt6370_priv *priv,
+				     unsigned int led_no, unsigned int *level)
+{
+	enum mt6370_led_field sel_field;
+
+	sel_field = mt6370_get_led_current_field(led_no);
+
+	return regmap_field_read(priv->fields[sel_field], level);
+}
+
+static int mt6370_set_led_duty(struct mt6370_priv *priv, unsigned int led_no,
+			       unsigned int ton, unsigned int toff)
+{
+	enum mt6370_led_field sel_field;
+	unsigned int divisor, ratio;
+
+	divisor = priv->is_mt6372 ? MT6372_PMW_DUTY : MT6370_PWM_DUTY;
+	ratio = ton * divisor / (ton + toff);
+
+	switch (led_no) {
+	case MT6370_LED_ISNK1:
+		sel_field = F_LED1_DUTY;
+		break;
+	case MT6370_LED_ISNK2:
+		sel_field = F_LED2_DUTY;
+		break;
+	case MT6370_LED_ISNK3:
+		sel_field = F_LED3_DUTY;
+		break;
+	default:
+		sel_field = F_LED4_DUTY;
+	}
+
+	return regmap_field_write(priv->fields[sel_field], ratio);
+}
+
+static const unsigned int common_tfreqs[] = {
+	10000, 5000, 2000, 1000, 500, 200, 5, 1,
+};
+
+static const unsigned int mt6372_tfreqs[] = {
+	8000, 4000, 2000, 1000, 500, 250, 8, 4,
+};
+
+static int mt6370_set_led_freq(struct mt6370_priv *priv, unsigned int led_no,
+			       unsigned int ton, unsigned int toff)
+{
+	enum mt6370_led_field sel_field;
+	const unsigned int *tfreq;
+	unsigned int tfreq_len, tsum;
+	int i;
+
+	if (priv->is_mt6372) {
+		tfreq = mt6372_tfreqs;
+		tfreq_len = ARRAY_SIZE(mt6372_tfreqs);
+	} else {
+		tfreq = common_tfreqs;
+		tfreq_len = ARRAY_SIZE(common_tfreqs);
+	}
+
+	tsum = ton + toff;
+
+	if (tsum > tfreq[0] || tsum < tfreq[tfreq_len - 1])
+		return -EOPNOTSUPP;
+
+	for (i = 0; i < tfreq_len; i++) {
+		if (tsum >= tfreq[i])
+			break;
+	}
+
+	switch (led_no) {
+	case MT6370_LED_ISNK1:
+		sel_field = F_LED1_FREQ;
+		break;
+	case MT6370_LED_ISNK2:
+		sel_field = F_LED2_FREQ;
+		break;
+	case MT6370_LED_ISNK3:
+		sel_field = F_LED3_FREQ;
+		break;
+	default:
+		sel_field = F_LED4_FREQ;
+	}
+
+	return regmap_field_write(priv->fields[sel_field], i);
+}
+
+static void mt6370_get_breath_reg_base(struct mt6370_priv *priv,
+				       unsigned int led_no, unsigned int *base)
+{
+	if (priv->is_mt6372) {
+		*base = MT6372_REG_RGB1_TR + led_no * 3;
+		return;
+	}
+
+	switch (led_no) {
+	case MT6370_LED_ISNK1:
+	case MT6370_LED_ISNK2:
+	case MT6370_LED_ISNK3:
+		*base = MT6370_REG_RGB1_TR + led_no * 3;
+		break;
+	default:
+		*base = MT6370_REG_RGB_CHRIND_TR;
+	}
+}
+
+static int mt6370_gen_breath_pattern(struct mt6370_priv *priv,
+				     struct led_pattern *pattern, u32 len,
+				     u8 *pattern_val, u32 val_len)
+{
+	enum mt6370_led_ranges sel_range;
+	struct led_pattern *curr;
+	unsigned int sel;
+	u8 val[P_MAX_PATTERNS / 2] = {0};
+	int i;
+
+	if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2)
+		return -EINVAL;
+
+	/*
+	 * Pattern list
+	 * tr1:	byte 0, b'[7: 4]
+	 * tr2:	byte 0, b'[3: 0]
+	 * tf1:	byte 1, b'[7: 4]
+	 * tf2:	byte 1, b'[3: 0]
+	 * ton:	byte 2, b'[7: 4]
+	 * toff: byte 2, b'[3: 0]
+	 */
+	for (i = 0; i < P_MAX_PATTERNS; i++) {
+		curr = pattern + i;
+
+		sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
+
+		linear_range_get_selector_within(priv->ranges + sel_range,
+						 curr->delta_t, &sel);
+
+		val[i / 2] |= sel << (4 * ((i + 1) % 2));
+	}
+
+	memcpy(pattern_val, val, 3);
+	return 0;
+}
+
+static int mt6370_set_led_mode(struct mt6370_priv *priv, unsigned int led_no,
+			       enum mt6370_led_mode mode)
+{
+	enum mt6370_led_field sel_field;
+
+	switch (led_no) {
+	case MT6370_LED_ISNK1:
+		sel_field = F_LED1_MODE;
+		break;
+	case MT6370_LED_ISNK2:
+		sel_field = F_LED2_MODE;
+		break;
+	case MT6370_LED_ISNK3:
+		sel_field = F_LED3_MODE;
+		break;
+	default:
+		sel_field = F_LED4_MODE;
+	}
+
+	return regmap_field_write(priv->fields[sel_field], mode);
+}
+
+static int mt6370_mc_brightness_set(struct led_classdev *lcdev,
+				    enum led_brightness level)
+{
+	struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+	struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+	struct mt6370_priv *priv = led->priv;
+	struct mc_subled *subled;
+	unsigned int enable, disable;
+	int i, ret;
+
+	mutex_lock(&priv->lock);
+
+	led_mc_calc_color_components(mccdev, level);
+
+	ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+	if (ret)
+		goto out;
+
+	disable = enable;
+
+	for (i = 0; i < mccdev->num_colors; i++) {
+		u32 brightness;
+
+		subled = mccdev->subled_info + i;
+		brightness = min(subled->brightness, lcdev->max_brightness);
+		disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+		if (level == LED_OFF) {
+			enable &= ~MT6370_CHEN_BIT(subled->channel);
+
+			ret = mt6370_set_led_mode(priv, subled->channel,
+						  MT6370_LED_REG_MODE);
+			if (ret)
+				goto out;
+
+			continue;
+		}
+
+		if (brightness == LED_OFF) {
+			enable &= ~MT6370_CHEN_BIT(subled->channel);
+			continue;
+		}
+
+		enable |= MT6370_CHEN_BIT(subled->channel);
+
+		ret = mt6370_set_led_brightness(priv, subled->channel,
+						brightness);
+		if (ret)
+			goto out;
+	}
+
+	ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+	if (ret)
+		goto out;
+
+	ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_mc_blink_set(struct led_classdev *lcdev,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off)
+{
+	struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+	struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+	struct mt6370_priv *priv = led->priv;
+	struct mc_subled *subled;
+	unsigned int enable, disable;
+	int i, ret;
+
+	mutex_lock(&priv->lock);
+
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+	if (ret)
+		goto out;
+
+	disable = enable;
+
+	for (i = 0; i < mccdev->num_colors; i++) {
+		subled = mccdev->subled_info + i;
+
+		disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+		ret = mt6370_set_led_duty(priv, subled->channel, *delay_on,
+					  *delay_off);
+		if (ret)
+			goto out;
+
+		ret = mt6370_set_led_freq(priv, subled->channel, *delay_on,
+					  *delay_off);
+		if (ret)
+			goto out;
+
+		ret = mt6370_set_led_mode(priv, subled->channel,
+					  MT6370_LED_PWM_MODE);
+		if (ret)
+			goto out;
+	}
+
+	/* Toggle to make pattern timing the same */
+	ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+	if (ret)
+		goto out;
+
+	ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_mc_pattern_set(struct led_classdev *lcdev,
+			struct led_pattern *pattern, u32 len, int repeat)
+{
+	struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+	struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+	struct mt6370_priv *priv = led->priv;
+	struct mc_subled *subled;
+	unsigned int reg_base, enable, disable;
+	u8 params[P_MAX_PATTERNS / 2];
+	int i, ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = mt6370_gen_breath_pattern(priv, pattern, len, params,
+					sizeof(params));
+	if (ret)
+		goto out;
+
+	ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+	if (ret)
+		goto out;
+
+	disable = enable;
+
+	for (i = 0; i < mccdev->num_colors; i++) {
+		subled = mccdev->subled_info + i;
+
+		mt6370_get_breath_reg_base(priv, subled->channel, &reg_base);
+		disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+		ret = regmap_raw_write(priv->regmap, reg_base, params,
+				       sizeof(params));
+		if (ret)
+			goto out;
+
+		ret = mt6370_set_led_mode(priv, subled->channel,
+					  MT6370_LED_BREATH_MODE);
+		if (ret)
+			goto out;
+	}
+
+	/* Toggle to make pattern timing be the same */
+	ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+	if (ret)
+		goto out;
+
+	ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static inline int mt6370_mc_pattern_clear(struct led_classdev *lcdev)
+{
+	struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+	struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+	struct mt6370_priv *priv = led->priv;
+	struct mc_subled *subled;
+	int i, ret = 0;
+
+	mutex_lock(&led->priv->lock);
+
+	for (i = 0; i < mccdev->num_colors; i++) {
+		subled = mccdev->subled_info + i;
+
+		ret = mt6370_set_led_mode(priv, subled->channel,
+					  MT6370_LED_REG_MODE);
+		if (ret)
+			break;
+	}
+
+	mutex_unlock(&led->priv->lock);
+
+	return ret;
+}
+
+static int mt6370_isnk_brightness_set(struct led_classdev *lcdev,
+				      enum led_brightness level)
+{
+	struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+	struct mt6370_priv *priv = led->priv;
+	unsigned int enable;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+	if (ret)
+		goto out;
+
+	if (level == LED_OFF) {
+		enable &= ~MT6370_CHEN_BIT(led->index);
+
+		ret = mt6370_set_led_mode(priv, led->index,
+					  MT6370_LED_REG_MODE);
+		if (ret)
+			goto out;
+
+		ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+	} else {
+		enable |= MT6370_CHEN_BIT(led->index);
+
+		ret = mt6370_set_led_brightness(priv, led->index, level);
+		if (ret)
+			goto out;
+
+		ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+	}
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_isnk_blink_set(struct led_classdev *lcdev,
+				 unsigned long *delay_on,
+				 unsigned long *delay_off)
+{
+	struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+	struct mt6370_priv *priv = led->priv;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	ret = mt6370_set_led_duty(priv, led->index, *delay_on, *delay_off);
+	if (ret)
+		goto out;
+
+	ret = mt6370_set_led_freq(priv, led->index, *delay_on, *delay_off);
+	if (ret)
+		goto out;
+
+	ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_PWM_MODE);
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_isnk_pattern_set(struct led_classdev *lcdev,
+				   struct led_pattern *pattern, u32 len,
+				   int repeat)
+{
+	struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+	struct mt6370_priv *priv = led->priv;
+	unsigned int reg_base;
+	u8 params[P_MAX_PATTERNS / 2];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = mt6370_gen_breath_pattern(priv, pattern, len, params,
+					sizeof(params));
+	if (ret)
+		goto out;
+
+	mt6370_get_breath_reg_base(priv, led->index, &reg_base);
+
+	ret = regmap_raw_write(priv->regmap, reg_base, params, sizeof(params));
+	if (ret)
+		goto out;
+
+	ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_BREATH_MODE);
+
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static inline int mt6370_isnk_pattern_clear(struct led_classdev *lcdev)
+{
+	struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+	struct mt6370_priv *priv = led->priv;
+	int ret;
+
+	mutex_lock(&led->priv->lock);
+	ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_REG_MODE);
+	mutex_unlock(&led->priv->lock);
+
+	return ret;
+}
+
+static int mt6370_init_led_properties(struct mt6370_led *led,
+				      struct led_init_data *init_data)
+{
+	struct mt6370_priv *priv = led->priv;
+	struct led_classdev *lcdev;
+	struct fwnode_handle *child;
+	enum mt6370_led_ranges sel_range;
+	u32 max_uA, max_level;
+	const char * const states[] = { "off", "keep", "on" };
+	const char *stat_str;
+	int ret;
+
+	if (led->index == MT6370_VIRTUAL_MULTICOLOR) {
+		struct mc_subled *sub_led;
+		u32 num_color = 0;
+
+		sub_led = devm_kzalloc(priv->dev,
+				       sizeof(*sub_led) * MC_CHANNEL_NUM,
+				       GFP_KERNEL);
+		if (!sub_led)
+			return -ENOMEM;
+
+		fwnode_for_each_child_node(init_data->fwnode, child) {
+			u32 reg, color;
+
+			ret = fwnode_property_read_u32(child, "reg", &reg);
+			if (ret || reg > MT6370_LED_ISNK3 ||
+			    priv->leds_active & BIT(reg))
+				return -EINVAL;
+
+			ret = fwnode_property_read_u32(child, "color", &color);
+			if (ret) {
+				dev_err(priv->dev,
+					"led %d, no color specified\n",
+					led->index);
+				return ret;
+			}
+
+			priv->leds_active |= BIT(reg);
+			sub_led[num_color].color_index = color;
+			sub_led[num_color].channel = reg;
+			num_color++;
+		}
+
+		if (num_color < 2) {
+			dev_err(priv->dev,
+				"Multicolor must include 2 or more led channel\n");
+			return -EINVAL;
+		}
+
+		led->mc.num_colors = num_color;
+		led->mc.subled_info = sub_led;
+
+		lcdev = &led->mc.led_cdev;
+		lcdev->brightness_set_blocking = mt6370_mc_brightness_set;
+		lcdev->blink_set = mt6370_mc_blink_set;
+		lcdev->pattern_set = mt6370_mc_pattern_set;
+		lcdev->pattern_clear = mt6370_mc_pattern_clear;
+	} else {
+		lcdev = &led->isink;
+		lcdev->brightness_set_blocking = mt6370_isnk_brightness_set;
+		lcdev->blink_set = mt6370_isnk_blink_set;
+		lcdev->pattern_set = mt6370_isnk_pattern_set;
+		lcdev->pattern_clear = mt6370_isnk_pattern_clear;
+	}
+
+	ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp",
+				       &max_uA);
+	if (ret) {
+		dev_warn(priv->dev,
+		   "Not specified led-max-microamp, config to the minimum\n");
+		max_uA = 0;
+	}
+
+	if (led->index == MT6370_LED_ISNK4)
+		sel_range = R_LED4_CURR;
+	else
+		sel_range = R_LED123_CURR;
+
+	linear_range_get_selector_within(priv->ranges + sel_range, max_uA,
+					 &max_level);
+
+	lcdev->max_brightness = max_level;
+
+	fwnode_property_read_string(init_data->fwnode, "linux,default-trigger",
+			&lcdev->default_trigger);
+
+	if (!fwnode_property_read_string(init_data->fwnode, "default-state",
+					 &stat_str)) {
+		ret = match_string(states, ARRAY_SIZE(states), stat_str);
+		if (ret < 0)
+			ret = STATE_OFF;
+
+		led->default_state = ret;
+	}
+
+	return 0;
+}
+
+static int mt6370_isnk_init_default_state(struct mt6370_led *led)
+{
+	struct mt6370_priv *priv = led->priv;
+	unsigned int enable, level;
+	int ret;
+
+	ret = mt6370_get_led_brightness(priv, led->index, &level);
+	if (ret)
+		return ret;
+
+	ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+	if (ret)
+		return ret;
+
+	if (!(enable & MT6370_CHEN_BIT(led->index)))
+		level = LED_OFF;
+
+	switch (led->default_state) {
+	case STATE_ON:
+		led->isink.brightness = led->isink.max_brightness;
+		break;
+	case STATE_KEEP:
+		led->isink.brightness = min(level, led->isink.max_brightness);
+		break;
+	default:
+		led->isink.brightness = LED_OFF;
+	}
+
+	return mt6370_isnk_brightness_set(&led->isink, led->isink.brightness);
+}
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+			       struct led_init_data *init_data)
+{
+	struct mt6370_priv *priv = led->priv;
+	int ret;
+
+	if (led->index == MT6370_VIRTUAL_MULTICOLOR) {
+		ret = mt6370_mc_brightness_set(&led->mc.led_cdev, LED_OFF);
+		if (ret) {
+			dev_err(parent, "Couldn't set multicolor brightness\n");
+			return ret;
+		}
+
+		ret = devm_led_classdev_multicolor_register_ext(parent,
+								&led->mc,
+								init_data);
+		if (ret) {
+			dev_err(parent, "Couldn't register multicolor\n");
+			return ret;
+		}
+	} else {
+		if (led->index == MT6370_LED_ISNK4) {
+			ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1);
+			if (ret) {
+				dev_err(parent, "Failed to set CHRIND to SW\n");
+				return ret;
+			}
+		}
+
+		ret = mt6370_isnk_init_default_state(led);
+		if (ret) {
+			dev_err(parent, "Failed to init %d isnk state\n",
+				led->index);
+			return ret;
+		}
+
+		ret = devm_led_classdev_register_ext(parent, &led->isink,
+						     init_data);
+		if (ret) {
+			dev_err(parent, "Couldn't register isink %d\n",
+				led->index);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+	unsigned int devinfo, vid;
+	int ret;
+
+	ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo);
+	if (ret)
+		return ret;
+
+	vid = FIELD_GET(MT6370_VENID_MASK, devinfo);
+	if (vid == 0x9 || vid == 0xb) {
+		priv->reg_fields = mt6372_reg_fields;
+		priv->ranges = mt6372_led_ranges;
+		priv->is_mt6372 = true;
+	} else {
+		priv->reg_fields = common_reg_fields;
+		priv->ranges = common_led_ranges;
+	}
+
+	return 0;
+}
+
+static int mt6370_leds_probe(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv;
+	struct fwnode_handle *child;
+	size_t count;
+	int i = 0, ret;
+
+	count = device_get_child_node_count(&pdev->dev);
+	if (!count || count > MT6370_MAX_LEDS) {
+		dev_err(&pdev->dev,
+			"No child node or node count over max led number %zu\n",
+			count);
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&pdev->dev,
+			    struct_size(priv, leds, count), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->leds_count = count;
+	priv->dev = &pdev->dev;
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Failed to get parent regmap\n");
+
+	ret = mt6370_check_vendor_info(priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to check vendor info (%d)\n", ret);
+		return ret;
+	}
+
+	ret = devm_regmap_field_bulk_alloc(&pdev->dev, priv->regmap,
+					   priv->fields, priv->reg_fields,
+					   F_MAX_FIELDS);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to allocate regmap field\n");
+
+	device_for_each_child_node(&pdev->dev, child) {
+		struct mt6370_led *led = priv->leds + i++;
+		struct led_init_data init_data = { .fwnode = child, };
+		u32 reg, color;
+
+		ret = fwnode_property_read_u32(child, "reg", &reg);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Failed to parse reg property\n");
+
+		if (reg >= MT6370_MAX_LEDS)
+			return dev_err_probe(&pdev->dev, -EINVAL,
+					     "Error reg property number\n");
+
+		ret = fwnode_property_read_u32(child, "color", &color);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to parse color property\n");
+			return ret;
+		}
+
+		if (color == LED_COLOR_ID_RGB || color == LED_COLOR_ID_MULTI)
+			reg = MT6370_VIRTUAL_MULTICOLOR;
+
+		if (priv->leds_active & BIT(reg))
+			return dev_err_probe(&pdev->dev, -EINVAL,
+					     "Duplicat reg property\n");
+
+		priv->leds_active |= BIT(reg);
+
+		led->index = reg;
+		led->priv = priv;
+
+		ret = mt6370_init_led_properties(led, &init_data);
+		if (ret)
+			return ret;
+
+		ret = mt6370_led_register(&pdev->dev, led, &init_data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_rgbled_device_table[] = {
+	{ .compatible = "mediatek,mt6370-indicator", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_rgbled_device_table);
+
+static struct platform_driver mt6370_rgbled_driver = {
+	.driver = {
+		.name = "mt6370-indicator",
+		.of_match_table = mt6370_rgbled_device_table,
+	},
+	.probe = mt6370_leds_probe,
+};
+module_platform_driver(mt6370_rgbled_driver);
+
+MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>");
+MODULE_DESCRIPTION("MediaTek MT6370 RGB Led Driver");
+MODULE_LICENSE("GPL v2");