diff mbox series

[v5,08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver

Message ID 20220715112607.591-9-peterwu.pub@gmail.com
State Superseded
Headers show
Series Add MediaTek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu July 15, 2022, 11:26 a.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

The MT6370 is a highly-integrated smart power management IC, which
includes a single cell Li-Ion/Li-Polymer switching battery charger,
a USB Type-C & Power Delivery (PD) controller, dual Flash LED current
sources, a RGB LED driver, a backlight WLED driver, a display bias
driver and a general LDO for portable devices.

This commit add support for the Type-C & Power Delivery controller in
MediaTek MT6370 IC.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---

v5
- Add comma for the last index of mt6370_reg_init.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine kconfig text.
- Remove both 'else' in set_vbus callback.
- Remove comma for of_device_id if the assigned member is only one.
---
 drivers/usb/typec/tcpm/Kconfig        |  11 ++
 drivers/usb/typec/tcpm/Makefile       |   1 +
 drivers/usb/typec/tcpm/tcpci_mt6370.c | 207 ++++++++++++++++++++++++++++++++++
 3 files changed, 219 insertions(+)
 create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6370.c

Comments

cy_huang July 18, 2022, 8:08 a.m. UTC | #1
On Fri, Jul 15, 2022 at 03:10:42PM +0200, Andy Shevchenko wrote:
> On Fri, Jul 15, 2022 at 1:28 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
> 
> > The MT6370 is a highly-integrated smart power management IC, which
> > includes a single cell Li-Ion/Li-Polymer switching battery charger,
> > a USB Type-C & Power Delivery (PD) controller, dual Flash LED current
> > sources, a RGB LED driver, a backlight WLED driver, a display bias
> > driver and a general LDO for portable devices.
> >
> > This commit add support for the Type-C & Power Delivery controller in
> 
> This commit add -> Add
> 
Upper case? Or rewrite it as 'This commit is to add .....'?
> 
> > MediaTek MT6370 IC.
> 
> 
> > +static int mt6370_tcpc_probe(struct platform_device *pdev)
> > +{
> > +       struct mt6370_priv *priv;
> > +       struct device *dev = &pdev->dev;
> > +       int ret;
> > +
> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +       if (!priv)
> > +               return -ENOMEM;
> > +
> > +       priv->dev = dev;
> > +       platform_set_drvdata(pdev, priv);
> > +
> > +       priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL);
> > +       if (!priv->tcpci_data.regmap)
> > +               return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
> > +
> > +       ret = mt6370_check_vendor_info(priv);
> > +       if (ret)
> > +               return ret;
> > +
> > +       priv->irq = platform_get_irq(pdev, 0);
> > +       if (priv->irq < 0)
> > +               return priv->irq;
> > +
> > +       /* Assign TCPCI feature and ops */
> > +       priv->tcpci_data.auto_discharge_disconnect = 1;
> > +       priv->tcpci_data.init = mt6370_tcpc_init;
> > +       priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn;
> > +
> > +       priv->vbus = devm_regulator_get_optional(dev, "vbus");
> > +       if (!IS_ERR(priv->vbus))
> > +               priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus;
> > +
> > +       priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data);
> > +       if (IS_ERR(priv->tcpci))
> > +               return dev_err_probe(dev, PTR_ERR(priv->tcpci),
> > +                                    "Failed to register tcpci port\n");
> > +
> > +       ret = devm_request_threaded_irq(dev, priv->irq, NULL,
> > +                                       mt6370_irq_handler, IRQF_ONESHOT,
> > +                                       dev_name(dev), priv);
> > +       if (ret) {
> 
> > +               tcpci_unregister_port(priv->tcpci);
> 
> This is wrong.
> You mixed devm_ with non-devm. Either drop devm_ *after* the first
> non-devm_ call, or convert everything to be managed.
> 
How about to add 'devm_add_action_or_reset' for tcpci_unregister_port?
This will convert all as 'devm_' version.
> > +               return dev_err_probe(dev, ret, "Failed to allocate irq\n");
> > +       }
> > +
> > +       device_init_wakeup(dev, true);
> > +       dev_pm_set_wake_irq(dev, priv->irq);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mt6370_tcpc_remove(struct platform_device *pdev)
> > +{
> > +       struct mt6370_priv *priv = platform_get_drvdata(pdev);
> 
> > +       disable_irq(priv->irq);
> 
> Why?
> An ugly workaround due to ordering issues in ->probe()?
>
Yes, due to the ordering in probe.
'bus remove' will be called before device resource releases.

Like as you said, another way is to convert all as non-devm
version after 'tcpci_unregister_port'.

If to keep the original order, 'disable_irq' before
'tcpci_unregister_port' can make the flow more safe.

Or you can think one case if irq triggers after
'tcpci_unregister_port'. Null pointer occurs.

Anyway, in next revision, I'll convert all to be 'devm_' version.
For this remove callback, only 'dev_pm_clear_wake_irq' and
'device_init_wakeup' will be kept.

Is this better?

> > +       tcpci_unregister_port(priv->tcpci);
> > +       dev_pm_clear_wake_irq(&pdev->dev);
> > +       device_init_wakeup(&pdev->dev, false);
> > +
> > +       return 0;
> > +}
> 
> -- 
> With Best Regards,
> Andy Shevchenko
diff mbox series

Patch

diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 073fd2e..e6b88ca 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -35,6 +35,17 @@  config TYPEC_MT6360
 	  USB Type-C. It works with Type-C Port Controller Manager
 	  to provide USB PD and USB Type-C functionalities.
 
+config TYPEC_TCPCI_MT6370
+	tristate "MediaTek MT6370 Type-C driver"
+	depends on MFD_MT6370
+	help
+	  MediaTek MT6370 is a multi-functional IC that includes
+	  USB Type-C. It works with Type-C Port Controller Manager
+	  to provide USB PD and USB Type-C functionalities.
+
+	  This driver can also be built as a module. The module
+	  will be called "tcpci_mt6370".
+
 config TYPEC_TCPCI_MAXIM
 	tristate "Maxim TCPCI based Type-C chip driver"
 	help
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
index 7d499f3..906d9dc 100644
--- a/drivers/usb/typec/tcpm/Makefile
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -6,4 +6,5 @@  typec_wcove-y				:= wcove.o
 obj-$(CONFIG_TYPEC_TCPCI)		+= tcpci.o
 obj-$(CONFIG_TYPEC_RT1711H)		+= tcpci_rt1711h.o
 obj-$(CONFIG_TYPEC_MT6360)		+= tcpci_mt6360.o
+obj-$(CONFIG_TYPEC_TCPCI_MT6370)	+= tcpci_mt6370.o
 obj-$(CONFIG_TYPEC_TCPCI_MAXIM)		+= tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c
new file mode 100644
index 0000000..a08b0ba
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c
@@ -0,0 +1,207 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpm.h>
+#include "tcpci.h"
+
+#define MT6370_REG_SYSCTRL8	0x9B
+
+#define MT6370_AUTOIDLE_MASK	BIT(3)
+
+#define MT6370_VENDOR_ID	0x29CF
+#define MT6370_TCPC_DID_A	0x2170
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regulator *vbus;
+	struct tcpci *tcpci;
+	struct tcpci_data tcpci_data;
+	int irq;
+};
+
+static const struct reg_sequence mt6370_reg_init[] = {
+	REG_SEQ(0xA0, 0x1, 1000),
+	REG_SEQ(0x81, 0x38, 0),
+	REG_SEQ(0x82, 0x82, 0),
+	REG_SEQ(0xBA, 0xFC, 0),
+	REG_SEQ(0xBB, 0x50, 0),
+	REG_SEQ(0x9E, 0x8F, 0),
+	REG_SEQ(0xA1, 0x5, 0),
+	REG_SEQ(0xA2, 0x4, 0),
+	REG_SEQ(0xA3, 0x4A, 0),
+	REG_SEQ(0xA4, 0x01, 0),
+	REG_SEQ(0x95, 0x01, 0),
+	REG_SEQ(0x80, 0x71, 0),
+	REG_SEQ(0x9B, 0x3A, 1000),
+};
+
+static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+	u16 did;
+	int ret;
+
+	ret = regmap_register_patch(data->regmap, mt6370_reg_init,
+				    ARRAY_SIZE(mt6370_reg_init));
+	if (ret)
+		return ret;
+
+	ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16));
+	if (ret)
+		return ret;
+
+	if (did == MT6370_TCPC_DID_A)
+		return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
+
+	return 0;
+}
+
+static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data,
+				 bool enable)
+{
+	return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8,
+				  MT6370_AUTOIDLE_MASK,
+				  !enable ? MT6370_AUTOIDLE_MASK : 0);
+}
+
+static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data,
+				bool source, bool sink)
+{
+	struct mt6370_priv *priv = container_of(data, struct mt6370_priv,
+						tcpci_data);
+	int ret;
+
+	ret = regulator_is_enabled(priv->vbus);
+	if (ret < 0)
+		return ret;
+
+	if (ret && !source)
+		return regulator_disable(priv->vbus);
+
+	if (!ret && source)
+		return regulator_enable(priv->vbus);
+
+	return 0;
+}
+
+static irqreturn_t mt6370_irq_handler(int irq, void *dev_id)
+{
+	struct mt6370_priv *priv = dev_id;
+
+	return tcpci_irq(priv->tcpci);
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+	struct regmap *regmap = priv->tcpci_data.regmap;
+	u16 vid;
+	int ret;
+
+	ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16));
+	if (ret)
+		return ret;
+
+	if (vid != MT6370_VENDOR_ID)
+		return dev_err_probe(priv->dev, -ENODEV,
+				     "Vendor ID not correct 0x%02x\n", vid);
+
+	return 0;
+}
+
+static int mt6370_tcpc_probe(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->tcpci_data.regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
+
+	ret = mt6370_check_vendor_info(priv);
+	if (ret)
+		return ret;
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	/* Assign TCPCI feature and ops */
+	priv->tcpci_data.auto_discharge_disconnect = 1;
+	priv->tcpci_data.init = mt6370_tcpc_init;
+	priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn;
+
+	priv->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (!IS_ERR(priv->vbus))
+		priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus;
+
+	priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data);
+	if (IS_ERR(priv->tcpci))
+		return dev_err_probe(dev, PTR_ERR(priv->tcpci),
+				     "Failed to register tcpci port\n");
+
+	ret = devm_request_threaded_irq(dev, priv->irq, NULL,
+					mt6370_irq_handler, IRQF_ONESHOT,
+					dev_name(dev), priv);
+	if (ret) {
+		tcpci_unregister_port(priv->tcpci);
+		return dev_err_probe(dev, ret, "Failed to allocate irq\n");
+	}
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, priv->irq);
+
+	return 0;
+}
+
+static int mt6370_tcpc_remove(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv = platform_get_drvdata(pdev);
+
+	disable_irq(priv->irq);
+	tcpci_unregister_port(priv->tcpci);
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_tcpc_devid_table[] = {
+	{ .compatible = "mediatek,mt6370-tcpc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table);
+
+static struct platform_driver mt6370_tcpc_driver = {
+	.driver = {
+		.name = "mt6370-tcpc",
+		.of_match_table = mt6370_tcpc_devid_table,
+	},
+	.probe = mt6370_tcpc_probe,
+	.remove = mt6370_tcpc_remove,
+};
+module_platform_driver(mt6370_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");