@@ -90,6 +90,7 @@ &fec {
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&rgmii_phy>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -178,6 +178,7 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -146,6 +146,7 @@ &fec {
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -100,6 +100,7 @@ &fec {
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
@@ -192,6 +192,7 @@ &fec {
phy-mode = "rgmii";
phy-handle = <ðphy>;
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -334,6 +334,7 @@ &fec {
phy-mode = "rgmii";
phy-handle = <ðphy>;
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -263,6 +263,7 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -267,6 +267,7 @@ &fec {
phy-mode = "rgmii";
phy-handle = <ðphy>;
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -295,6 +295,7 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
&fec {
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
@@ -192,6 +192,7 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ /delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
In most cases this is related to fsl,err006687-workaround-present, which requires a GPIO interrupt next a GIC interrupt. This fixes the dtbs_check warning: imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema: {'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml', [...] Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Given that all DT add interrupts-extended on the very next line, this seems the correct thing to do. arch/arm/boot/dts/imx6dl-riotboard.dts | 1 + arch/arm/boot/dts/imx6q-arm2.dts | 1 + arch/arm/boot/dts/imx6q-evi.dts | 1 + arch/arm/boot/dts/imx6q-mccmon6.dts | 1 + arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 1 + arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 + arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 1 + arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 1 + 11 files changed, 11 insertions(+)