| Message ID | 963AF33B-54B7-4172-92D1-E2898E256A7E@kohlschutter.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: rockchip: rk3399-nanopi4: Fix voltage regulator config | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 8c0ff6c96e03..55b93eac2f99 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -70,7 +70,6 @@ vcc3v0_sd: vcc3v0-sd { gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_pwr_h>; - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc3v0_sd";
A series of issues exist around the "vcc3v0_sd" voltage regulator that made it necessary to mark it "always-on". With the patch "regulator: core: Resolve supply name earlier to prevent double-init", this option is no longer necessary. Removing this option not only prevents a hang when rebooting Nanopi R4S, it also ensures that bootloaders like u-boot can boot from an SD card right away, without out-of-tree patches that re-initialize voltage levels. Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com> --- arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 1 - 1 file changed, 1 deletion(-)