diff mbox series

ASoC: dt-bindings: use spi-peripheral-props.yaml

Message ID 20220727164050.385241-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit abed2baf6814597f244cd879285b2210b0870548
Headers show
Series ASoC: dt-bindings: use spi-peripheral-props.yaml | expand

Commit Message

Krzysztof Kozlowski July 27, 2022, 4:40 p.m. UTC
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Technically, this depends on [1] merged to SPI tree, if we want to
preserve existing behavior of not allowing SPI CPHA and CPOL in each of
schemas in this patch.

If this patch comes independently via different tree, the SPI CPHA and
CPOL will be allowed for brief period of time, before [1] is merged.
This will not have negative impact, just DT schema checks will be
loosened for that period.

[1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
---
 .../devicetree/bindings/sound/adi,adau1977.yaml          | 7 ++++---
 Documentation/devicetree/bindings/sound/wlf,wm8731.yaml  | 9 +++++----
 2 files changed, 9 insertions(+), 7 deletions(-)

Comments

Charles Keepax July 27, 2022, 4:53 p.m. UTC | #1
On Wed, Jul 27, 2022 at 06:40:50PM +0200, Krzysztof Kozlowski wrote:
> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
> 
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
> 
> While changing additionalProperties->unevaluatedProperties, put it in
> typical place, just before example DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---

For the Wolfson bits:

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles
Mark Brown July 28, 2022, 12:04 a.m. UTC | #2
On Wed, 27 Jul 2022 18:40:50 +0200, Krzysztof Kozlowski wrote:
> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
> 
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: use spi-peripheral-props.yaml
      commit: abed2baf6814597f244cd879285b2210b0870548

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
index b80454ad97da..847b83398d3d 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -32,8 +32,6 @@  properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   AVDD-supply:
     description: Analog power support for the device.
 
@@ -52,7 +50,10 @@  required:
   - compatible
   - AVDD-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
index e7220e8b49f0..15795f63b5a3 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
@@ -52,10 +52,6 @@  properties:
   DCVDD-supply:
     description: Digital core supply regulator for the DCVDD pin.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - reg
   - compatible
@@ -64,6 +60,11 @@  required:
   - DBVDD-supply
   - DCVDD-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {