@@ -1767,6 +1767,230 @@ __v4l2_subdev_next_active_route(const struct v4l2_subdev_krouting *routing,
}
EXPORT_SYMBOL_GPL(__v4l2_subdev_next_active_route);
+static int v4l2_subdev_enable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask)
+{
+ struct device *dev = sd->entity.graph_obj.mdev->dev;
+ unsigned int i;
+ int ret;
+
+ /*
+ * The subdev doesn't implement pad-based stream enable, fall back
+ * on the .s_stream() operation. This can only be done for subdevs that
+ * have a single source pad, as sd->enabled_streams is global to the
+ * subdev.
+ */
+ if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < sd->entity.num_pads; ++i) {
+ if (i != pad && sd->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
+ return -EOPNOTSUPP;
+ }
+
+ if (sd->enabled_streams & streams_mask) {
+ dev_dbg(dev, "set of streams %#llx already enabled on %s:%u\n",
+ streams_mask, sd->entity.name, pad);
+ return -EALREADY;
+ }
+
+ /* Start streaming when the first streams are enabled. */
+ if (!sd->enabled_streams) {
+ ret = v4l2_subdev_call(sd, video, s_stream, 1);
+ if (ret)
+ return ret;
+ }
+
+ sd->enabled_streams |= streams_mask;
+
+ return 0;
+}
+
+int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask)
+{
+ struct device *dev = sd->entity.graph_obj.mdev->dev;
+ struct v4l2_subdev_state *state;
+ u64 found_streams = 0;
+ unsigned int i;
+ int ret;
+
+ /* A few basic sanity checks first. */
+ if (pad >= sd->entity.num_pads)
+ return -EINVAL;
+
+ if (!streams_mask)
+ return 0;
+
+ /* Fallback on .s_stream() if .enable_streams() isn't available. */
+ if (!sd->ops->pad || !sd->ops->pad->enable_streams)
+ return v4l2_subdev_enable_streams_fallback(sd, pad,
+ streams_mask);
+
+ state = v4l2_subdev_lock_and_get_active_state(sd);
+
+ /*
+ * Verify that the requested streams exist and that they are not
+ * already enabled.
+ */
+ for (i = 0; i < state->stream_configs.num_configs; ++i) {
+ struct v4l2_subdev_stream_config *cfg =
+ &state->stream_configs.configs[i];
+
+ if (cfg->pad != pad || !(streams_mask & BIT_ULL(cfg->stream)))
+ continue;
+
+ found_streams |= BIT_ULL(cfg->stream);
+
+ if (cfg->enabled) {
+ dev_dbg(dev, "stream %u already enabled on %s:%u\n",
+ cfg->stream, sd->entity.name, pad);
+ ret = -EALREADY;
+ goto done;
+ }
+ }
+
+ if (found_streams != streams_mask) {
+ dev_dbg(dev, "streams 0x%llx not found on %s:%u\n",
+ streams_mask & ~found_streams, sd->entity.name, pad);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* Call the .enable_streams() operation. */
+ ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
+ streams_mask);
+ if (ret)
+ goto done;
+
+ /* Mark the streams as enabled. */
+ for (i = 0; i < state->stream_configs.num_configs; ++i) {
+ struct v4l2_subdev_stream_config *cfg =
+ &state->stream_configs.configs[i];
+
+ if (cfg->pad == pad && (streams_mask & BIT_ULL(cfg->stream)))
+ cfg->enabled = true;
+ }
+
+done:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(v4l2_subdev_enable_streams);
+
+static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask)
+{
+ struct device *dev = sd->entity.graph_obj.mdev->dev;
+ unsigned int i;
+ int ret;
+
+ /*
+ * If the subdev doesn't implement pad-based stream enable, fall back
+ * on the .s_stream() operation. This can only be done for subdevs that
+ * have a single source pad, as sd->enabled_streams is global to the
+ * subdev.
+ */
+ if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < sd->entity.num_pads; ++i) {
+ if (i != pad && sd->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
+ return -EOPNOTSUPP;
+ }
+
+ if ((sd->enabled_streams & streams_mask) != streams_mask) {
+ dev_dbg(dev, "set of streams %#llx already disabled on %s:%u\n",
+ streams_mask, sd->entity.name, pad);
+ return -EALREADY;
+ }
+
+ /* Stop streaming when the last streams are disabled. */
+ if (!(sd->enabled_streams & ~streams_mask)) {
+ ret = v4l2_subdev_call(sd, video, s_stream, 0);
+ if (ret)
+ return ret;
+ }
+
+ sd->enabled_streams &= ~streams_mask;
+
+ return 0;
+}
+
+int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask)
+{
+ struct device *dev = sd->entity.graph_obj.mdev->dev;
+ struct v4l2_subdev_state *state;
+ u64 found_streams = 0;
+ unsigned int i;
+ int ret;
+
+ /* A few basic sanity checks first. */
+ if (pad >= sd->entity.num_pads)
+ return -EINVAL;
+
+ if (!streams_mask)
+ return 0;
+
+ /* Fallback on .s_stream() if .disable_streams() isn't available. */
+ if (!sd->ops->pad || !sd->ops->pad->disable_streams)
+ return v4l2_subdev_disable_streams_fallback(sd, pad,
+ streams_mask);
+
+ state = v4l2_subdev_lock_and_get_active_state(sd);
+
+ /*
+ * Verify that the requested streams exist and that they are not
+ * already disabled.
+ */
+ for (i = 0; i < state->stream_configs.num_configs; ++i) {
+ struct v4l2_subdev_stream_config *cfg =
+ &state->stream_configs.configs[i];
+
+ if (cfg->pad != pad || !(streams_mask & BIT_ULL(cfg->stream)))
+ continue;
+
+ found_streams |= BIT_ULL(cfg->stream);
+
+ if (!cfg->enabled) {
+ dev_dbg(dev, "stream %u already disabled on %s:%u\n",
+ cfg->stream, sd->entity.name, pad);
+ ret = -EALREADY;
+ goto done;
+ }
+ }
+
+ if (found_streams != streams_mask) {
+ dev_dbg(dev, "streams 0x%llx not found on %s:%u\n",
+ streams_mask & ~found_streams, sd->entity.name, pad);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* Call the .disable_streams() operation. */
+ ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
+ streams_mask);
+ if (ret)
+ goto done;
+
+ /* Mark the streams as disabled. */
+ for (i = 0; i < state->stream_configs.num_configs; ++i) {
+ struct v4l2_subdev_stream_config *cfg =
+ &state->stream_configs.configs[i];
+
+ if (cfg->pad == pad && (streams_mask & BIT_ULL(cfg->stream)))
+ cfg->enabled = false;
+ }
+
+done:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(v4l2_subdev_disable_streams);
+
#endif /* CONFIG_VIDEO_V4L2_SUBDEV_API */
#endif /* CONFIG_MEDIA_CONTROLLER */
@@ -696,6 +696,7 @@ struct v4l2_subdev_pad_config {
*
* @pad: pad number
* @stream: stream number
+ * @enabled: has the stream been enabled with v4l2_subdev_enable_stream()
* @fmt: &struct v4l2_mbus_framefmt
* @crop: &struct v4l2_rect to be used for crop
* @compose: &struct v4l2_rect to be used for compose
@@ -705,6 +706,7 @@ struct v4l2_subdev_pad_config {
struct v4l2_subdev_stream_config {
u32 pad;
u32 stream;
+ bool enabled;
struct v4l2_mbus_framefmt fmt;
struct v4l2_rect crop;
@@ -810,6 +812,18 @@ struct v4l2_subdev_state {
*
* @set_routing: enable or disable data connection routes described in the
* subdevice routing table.
+ *
+ * @enable_streams: Enable the streams defined in streams_mask on the given
+ * source pad. Subdevs that implement this operation must use the active
+ * state management provided by the subdev core (enabled through a call to
+ * v4l2_subdev_init_finalize() at initialization time). Do not call
+ * directly, use v4l2_subdev_enable_streams() instead.
+ *
+ * @disable_streams: Disable the streams defined in streams_mask on the given
+ * source pad. Subdevs that implement this operation must use the active
+ * state management provided by the subdev core (enabled through a call to
+ * v4l2_subdev_init_finalize() at initialization time). Do not call
+ * directly, use v4l2_subdev_disable_streams() instead.
*/
struct v4l2_subdev_pad_ops {
int (*init_cfg)(struct v4l2_subdev *sd,
@@ -856,6 +870,12 @@ struct v4l2_subdev_pad_ops {
struct v4l2_subdev_state *state,
enum v4l2_subdev_format_whence which,
struct v4l2_subdev_krouting *route);
+ int (*enable_streams)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask);
+ int (*disable_streams)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask);
};
/**
@@ -1001,6 +1021,10 @@ struct v4l2_subdev_platform_data {
* @active_state: Active state for the subdev (NULL for subdevs tracking the
* state internally). Initialized by calling
* v4l2_subdev_init_finalize().
+ * @enabled_streams: Bitmask of enabled streams used by
+ * v4l2_subdev_enable_streams() and
+ * v4l2_subdev_disable_streams() helper functions for fallback
+ * cases.
*
* Each instance of a subdev driver should create this struct, either
* stand-alone or embedded in a larger struct.
@@ -1046,6 +1070,7 @@ struct v4l2_subdev {
* doesn't support it.
*/
struct v4l2_subdev_state *active_state;
+ u64 enabled_streams;
};
@@ -1629,6 +1654,66 @@ __v4l2_subdev_next_active_route(const struct v4l2_subdev_krouting *routing,
for ((route) = NULL; \
((route) = __v4l2_subdev_next_active_route((routing), (route)));)
+/**
+ * v4l2_subdev_enable_streams() - Enable streams on a pad
+ * @sd: The subdevice
+ * @pad: The pad
+ * @streams_mask: Bitmask of streams to enable
+ *
+ * This function enables streams on a source @pad of a subdevice. The pad is
+ * identified by its index, while the streams are identified by the
+ * @streams_mask bitmask. This allows enabling multiple streams on a pad at
+ * once.
+ *
+ * Enabling a stream that is already enabled isn't allowed. If @streams_mask
+ * contains an already enabled stream, this function returns -EALREADY without
+ * performing any operation.
+ *
+ * Per-stream enable is only available for subdevs that implement the
+ * .enable_streams() and .disable_streams() operations. For other subdevs, this
+ * function implements a best-effort compatibility by calling the .s_stream()
+ * operation, limited to subdevs that have a single source pad.
+ *
+ * Return:
+ * * 0: Success
+ * * -EALREADY: One of the streams in streams_mask is already enabled
+ * * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad
+ * * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is
+ * impossible because the subdev has multiple source pads
+ */
+int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask);
+
+/**
+ * v4l2_subdev_disable_streams() - Disable streams on a pad
+ * @sd: The subdevice
+ * @pad: The pad
+ * @streams_mask: Bitmask of streams to disable
+ *
+ * This function disables streams on a source @pad of a subdevice. The pad is
+ * identified by its index, while the streams are identified by the
+ * @streams_mask bitmask. This allows disabling multiple streams on a pad at
+ * once.
+ *
+ * Disabling a streams that is not enabled isn't allowed. If @streams_mask
+ * contains a disabled stream, this function returns -EALREADY without
+ * performing any operation.
+ *
+ * Per-stream disable is only available for subdevs that implement the
+ * .enable_streams() and .disable_streams() operations. For other subdevs, this
+ * function implements a best-effort compatibility by calling the .s_stream()
+ * operation, limited to subdevs that have a single source pad.
+ *
+ * Return:
+ * * 0: Success
+ * * -EALREADY: One of the streams in streams_mask is not enabled
+ * * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad
+ * * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is
+ * impossible because the subdev has multiple source pads
+ */
+int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
+ u64 streams_mask);
+
#endif /* CONFIG_VIDEO_V4L2_SUBDEV_API */
#endif /* CONFIG_MEDIA_CONTROLLER */