diff mbox series

arm64: dts: juno: Add missing MHU secure-irq

Message ID 20220730142336.484564-1-jassisinghbrar@gmail.com
State New
Headers show
Series arm64: dts: juno: Add missing MHU secure-irq | expand

Commit Message

Jassi Brar July 30, 2022, 2:23 p.m. UTC 
From: Jassi Brar <jaswinder.singh@linaro.org>

The MHU secure interrupt exists physically but is missing in the DT node.

Specify the interrupt in DT node to fix a warning on Arm Juno board:
   mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f6c55877fbd94..3220a00e9500d 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -26,9 +26,11 @@  mailbox: mhu@2b1f0000 {
 		compatible = "arm,mhu", "arm,primecell";
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "mhu_lpri_rx",
-				  "mhu_hpri_rx";
+				  "mhu_hpri_rx",
+				  "mhu_secure_rx";
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";