new file mode 100644
@@ -0,0 +1,35 @@
+/*
+ * virtio-gpio structures
+ *
+ * Copyright (c) 2022 Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef TESTS_LIBQOS_VIRTIO_GPIO_H
+#define TESTS_LIBQOS_VIRTIO_GPIO_H
+
+#include "qgraph.h"
+#include "virtio.h"
+#include "virtio-pci.h"
+
+typedef struct QVhostUserGPIO QVhostUserGPIO;
+typedef struct QVhostUserGPIOPCI QVhostUserGPIOPCI;
+typedef struct QVhostUserGPIODevice QVhostUserGPIODevice;
+
+struct QVhostUserGPIO {
+ QVirtioDevice *vdev;
+ QVirtQueue **queues;
+};
+
+struct QVhostUserGPIOPCI {
+ QVirtioPCIDevice pci_vdev;
+ QVhostUserGPIO gpio;
+};
+
+struct QVhostUserGPIODevice {
+ QOSGraphObject obj;
+ QVhostUserGPIO gpio;
+};
+
+#endif
new file mode 100644
@@ -0,0 +1,171 @@
+/*
+ * virtio-gpio nodes for testing
+ *
+ * Copyright (c) 2022 Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "standard-headers/linux/virtio_config.h"
+#include "../libqtest.h"
+#include "qemu/module.h"
+#include "qgraph.h"
+#include "virtio-gpio.h"
+
+static QGuestAllocator *alloc;
+
+static void virtio_gpio_cleanup(QVhostUserGPIO *gpio)
+{
+ QVirtioDevice *vdev = gpio->vdev;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ qvirtqueue_cleanup(vdev->bus, gpio->queues[i], alloc);
+ }
+ g_free(gpio->queues);
+}
+
+/*
+ * This handles the VirtIO setup from the point of view of the driver
+ * frontend and therefor doesn't present any vhost specific features
+ * and in fact masks of the re-used bit.
+ */
+static void virtio_gpio_setup(QVhostUserGPIO *gpio)
+{
+ QVirtioDevice *vdev = gpio->vdev;
+ uint64_t features;
+ int i;
+
+ features = qvirtio_get_features(vdev);
+ features &= ~QVIRTIO_F_BAD_FEATURE;
+ qvirtio_set_features(vdev, features);
+
+ gpio->queues = g_new(QVirtQueue *, 2);
+ for (i = 0; i < 2; i++) {
+ gpio->queues[i] = qvirtqueue_setup(vdev, alloc, i);
+ }
+ qvirtio_set_driver_ok(vdev);
+}
+
+static void *qvirtio_gpio_get_driver(QVhostUserGPIO *v_gpio,
+ const char *interface)
+{
+ if (!g_strcmp0(interface, "vhost-user-gpio")) {
+ return v_gpio;
+ }
+ if (!g_strcmp0(interface, "virtio")) {
+ return v_gpio->vdev;
+ }
+
+ g_assert_not_reached();
+}
+
+static void *qvirtio_gpio_device_get_driver(void *object,
+ const char *interface)
+{
+ QVhostUserGPIODevice *v_gpio = object;
+ return qvirtio_gpio_get_driver(&v_gpio->gpio, interface);
+}
+
+/* virtio-gpio (mmio) */
+static void qvirtio_gpio_device_destructor(QOSGraphObject *obj)
+{
+ QVhostUserGPIODevice *gpio_dev = (QVhostUserGPIODevice *) obj;
+ virtio_gpio_cleanup(&gpio_dev->gpio);
+}
+
+static void qvirtio_gpio_device_start_hw(QOSGraphObject *obj)
+{
+ QVhostUserGPIODevice *gpio_dev = (QVhostUserGPIODevice *) obj;
+ virtio_gpio_setup(&gpio_dev->gpio);
+}
+
+static void *virtio_gpio_device_create(void *virtio_dev,
+ QGuestAllocator *t_alloc,
+ void *addr)
+{
+ QVhostUserGPIODevice *virtio_device = g_new0(QVhostUserGPIODevice, 1);
+ QVhostUserGPIO *interface = &virtio_device->gpio;
+
+ interface->vdev = virtio_dev;
+ alloc = t_alloc;
+
+ virtio_device->obj.get_driver = qvirtio_gpio_device_get_driver;
+ virtio_device->obj.start_hw = qvirtio_gpio_device_start_hw;
+ virtio_device->obj.destructor = qvirtio_gpio_device_destructor;
+
+ return &virtio_device->obj;
+}
+
+/* virtio-gpio-pci */
+static void qvirtio_gpio_pci_destructor(QOSGraphObject *obj)
+{
+ QVhostUserGPIOPCI *gpio_pci = (QVhostUserGPIOPCI *) obj;
+ QOSGraphObject *pci_vobj = &gpio_pci->pci_vdev.obj;
+
+ virtio_gpio_cleanup(&gpio_pci->gpio);
+ qvirtio_pci_destructor(pci_vobj);
+}
+
+static void qvirtio_gpio_pci_start_hw(QOSGraphObject *obj)
+{
+ QVhostUserGPIOPCI *gpio_pci = (QVhostUserGPIOPCI *) obj;
+ QOSGraphObject *pci_vobj = &gpio_pci->pci_vdev.obj;
+
+ qvirtio_pci_start_hw(pci_vobj);
+ virtio_gpio_setup(&gpio_pci->gpio);
+}
+
+static void *qvirtio_gpio_pci_get_driver(void *object, const char *interface)
+{
+ QVhostUserGPIOPCI *v_gpio = object;
+
+ if (!g_strcmp0(interface, "pci-device")) {
+ return v_gpio->pci_vdev.pdev;
+ }
+ return qvirtio_gpio_get_driver(&v_gpio->gpio, interface);
+}
+
+static void *virtio_gpio_pci_create(void *pci_bus, QGuestAllocator *t_alloc,
+ void *addr)
+{
+ QVhostUserGPIOPCI *virtio_spci = g_new0(QVhostUserGPIOPCI, 1);
+ QVhostUserGPIO *interface = &virtio_spci->gpio;
+ QOSGraphObject *obj = &virtio_spci->pci_vdev.obj;
+
+ virtio_pci_init(&virtio_spci->pci_vdev, pci_bus, addr);
+ interface->vdev = &virtio_spci->pci_vdev.vdev;
+ alloc = t_alloc;
+
+ obj->get_driver = qvirtio_gpio_pci_get_driver;
+ obj->start_hw = qvirtio_gpio_pci_start_hw;
+ obj->destructor = qvirtio_gpio_pci_destructor;
+
+ return obj;
+}
+
+static void virtio_gpio_register_nodes(void)
+{
+ QPCIAddress addr = {
+ .devfn = QPCI_DEVFN(4, 0),
+ };
+
+ QOSGraphEdgeOptions edge_opts = { };
+
+ /* vhost-user-gpio-device */
+ edge_opts.extra_device_opts = "id=gpio0,chardev=chr-vhost-user-test";
+ qos_node_create_driver("vhost-user-gpio-device",
+ virtio_gpio_device_create);
+ qos_node_consumes("vhost-user-gpio-device", "virtio-bus", &edge_opts);
+ qos_node_produces("vhost-user-gpio-device", "vhost-user-gpio");
+
+ /* virtio-gpio-pci */
+ edge_opts.extra_device_opts = "id=gpio0,addr=04.0,chardev=chr-vhost-user-test";
+ add_qpci_address(&edge_opts, &addr);
+ qos_node_create_driver("vhost-user-gpio-pci", virtio_gpio_pci_create);
+ qos_node_consumes("vhost-user-gpio-pci", "pci-bus", &edge_opts);
+ qos_node_produces("vhost-user-gpio-pci", "vhost-user-gpio");
+}
+
+libqos_init(virtio_gpio_register_nodes);
@@ -110,7 +110,7 @@ void qvirtio_set_features(QVirtioDevice *d, uint64_t features)
* This could be a separate function for drivers that want to access
* configuration space before setting FEATURES_OK, but no existing users
* need that and it's less code for callers if this is done implicitly.
- */
+ */
if (features & (1ull << VIRTIO_F_VERSION_1)) {
uint8_t status = d->bus->get_status(d) |
VIRTIO_CONFIG_S_FEATURES_OK;
@@ -32,6 +32,7 @@
#include "standard-headers/linux/vhost_types.h"
#include "standard-headers/linux/virtio_ids.h"
#include "standard-headers/linux/virtio_net.h"
+#include "standard-headers/linux/virtio_gpio.h"
#ifdef CONFIG_LINUX
#include <sys/vfs.h>
@@ -53,9 +54,12 @@
#define VHOST_MAX_VIRTQUEUES 0x100
#define VHOST_USER_F_PROTOCOL_FEATURES 30
+#define VIRTIO_F_VERSION_1 32
+
#define VHOST_USER_PROTOCOL_F_MQ 0
#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
#define VHOST_USER_PROTOCOL_F_CROSS_ENDIAN 6
+#define VHOST_USER_PROTOCOL_F_CONFIG 9
#define VHOST_LOG_PAGE 0x1000
@@ -140,6 +144,7 @@ enum {
enum {
VHOST_USER_NET,
+ VHOST_USER_GPIO,
};
typedef struct TestServer {
@@ -198,6 +203,19 @@ static void append_vhost_net_opts(TestServer *s, GString *cmd_line,
chr_opts, s->chr_name);
}
+/*
+ * For GPIO there are no other magic devices we need to add (like
+ * block or netdev) so all we need to worry about is the vhost-user
+ * chardev socket.
+ */
+static void append_vhost_gpio_opts(TestServer *s, GString *cmd_line,
+ const char *chr_opts)
+{
+ g_string_append_printf(cmd_line, QEMU_CMD_CHR,
+ s->chr_name, s->socket_path,
+ chr_opts);
+}
+
static void append_mem_opts(TestServer *server, GString *cmd_line,
int size, enum test_memfd memfd)
{
@@ -1088,3 +1106,51 @@ static void register_vhost_user_test(void)
test_multiqueue, &opts);
}
libqos_init(register_vhost_user_test);
+
+static uint64_t vu_gpio_get_features(TestServer *s)
+{
+ return 0x1ULL << VIRTIO_F_VERSION_1 |
+ 0x1ULL << VIRTIO_GPIO_F_IRQ |
+ 0x1ULL << VHOST_USER_F_PROTOCOL_FEATURES;
+}
+
+/*
+ * This stub can't handle all the message types but we should reply
+ * that we support VHOST_USER_PROTOCOL_F_CONFIG as gpio would use it
+ * talking to a read vhost-user daemon.
+ */
+static void vu_gpio_get_protocol_features(TestServer *s, CharBackend *chr,
+ VhostUserMsg *msg)
+{
+ /* send back features to qemu */
+ msg->flags |= VHOST_USER_REPLY_MASK;
+ msg->size = sizeof(m.payload.u64);
+ msg->payload.u64 = 1ULL << VHOST_USER_PROTOCOL_F_CONFIG;
+
+ qemu_chr_fe_write_all(chr, (uint8_t *)msg, VHOST_USER_HDR_SIZE + msg->size);
+}
+
+static struct vhost_user_ops g_vu_gpio_ops = {
+ .type = VHOST_USER_GPIO,
+
+ .append_opts = append_vhost_gpio_opts,
+
+ .get_features = vu_gpio_get_features,
+ .set_features = vu_net_set_features,
+ .get_protocol_features = vu_gpio_get_protocol_features,
+};
+
+static void register_vhost_gpio_test(void)
+{
+ QOSGraphTestOptions opts = {
+ .before = vhost_user_test_setup,
+ .subprocess = true,
+ .arg = &g_vu_gpio_ops,
+ };
+
+ qemu_add_opts(&qemu_chardev_opts);
+
+ qos_add_test("read-guest-mem/memfile",
+ "vhost-user-gpio", test_read_guest_mem, &opts);
+}
+libqos_init(register_vhost_gpio_test);
@@ -2104,6 +2104,7 @@ R: Viresh Kumar <viresh.kumar@linaro.org>
S: Maintained
F: hw/virtio/vhost-user-gpio*
F: include/hw/virtio/vhost-user-gpio.h
+F: tests/qtest/libqos/virtio-gpio.*
virtio-crypto
M: Gonglei <arei.gonglei@huawei.com>
@@ -45,6 +45,7 @@ libqos_srcs = files(
'virtio-scsi.c',
'virtio-serial.c',
'virtio-iommu.c',
+ 'virtio-gpio.c',
'generic-pcihost.c',
# qgraph machines:
We don't have a virtio-gpio implementation in QEMU and only support a vhost-user backend. The QEMU side of the code is minimal so it should be enough to instantiate the device and pass some vhost-user messages over the control socket. To do this we hook into the existing vhost-user-test code and just add the bits required for gpio. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Message-Id: <20220408155704.2777166-1-alex.bennee@linaro.org> --- v2 - add more of the missing boilerplate - don't request LOG_SHMD - use get_features op - report VIRTIO_F_VERSION_1 - more comments v4 - update MAINTAINERS --- tests/qtest/libqos/virtio-gpio.h | 35 +++++++ tests/qtest/libqos/virtio-gpio.c | 171 +++++++++++++++++++++++++++++++ tests/qtest/libqos/virtio.c | 2 +- tests/qtest/vhost-user-test.c | 66 ++++++++++++ MAINTAINERS | 1 + tests/qtest/libqos/meson.build | 1 + 6 files changed, 275 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/libqos/virtio-gpio.h create mode 100644 tests/qtest/libqos/virtio-gpio.c