diff mbox series

[09/13] pmic: Convert pm8916 driver to a generic Qcom PMIC driver

Message ID 20220804142721.536556-10-sumit.garg@linaro.org
State Accepted
Commit e555d4caacd008b5091a8d755bdfff1ce8cceb2f
Headers show
Series USB support for QCS404 SoC | expand

Commit Message

Sumit Garg Aug. 4, 2022, 2:27 p.m. UTC
Since both pm8916.c and pm8916_gpio.c are already supporting multiple
Qcom SoCs, it makes sense to rename these drivers to pmic_qcom.c and
qcom_pmic_gpio.c respectively. Also, these driver can be extended to
support additional functionality if required for other Qcom SoCs.

Along with this import latest DT binding: qcom,spmi-pmic.txt from Linux
kernel and thereby remove pm8916.txt.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 configs/dragonboard410c_defconfig             |   4 +-
 configs/dragonboard820c_defconfig             |   4 +-
 configs/dragonboard845c_defconfig             |   4 +-
 configs/sandbox64_defconfig                   |   4 +-
 configs/sandbox_defconfig                     |   4 +-
 configs/sandbox_flattree_defconfig            |   4 +-
 configs/sandbox_noinst_defconfig              |   4 +-
 configs/sandbox_spl_defconfig                 |   4 +-
 configs/sandbox_vpl_defconfig                 |   4 +-
 configs/starqltechn_defconfig                 |   4 +-
 doc/device-tree-bindings/pmic/pm8916.txt      |  18 ---
 .../pmic/qcom,spmi-pmic.txt                   |  94 +++++++++++++++
 drivers/gpio/Kconfig                          |  10 +-
 drivers/gpio/Makefile                         |   2 +-
 .../gpio/{pm8916_gpio.c => qcom_pmic_gpio.c}  | 108 +++++++++---------
 drivers/power/pmic/Kconfig                    |   8 +-
 drivers/power/pmic/Makefile                   |   2 +-
 drivers/power/pmic/{pm8916.c => pmic_qcom.c}  |  42 +++----
 18 files changed, 200 insertions(+), 124 deletions(-)
 delete mode 100644 doc/device-tree-bindings/pmic/pm8916.txt
 create mode 100644 doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
 rename drivers/gpio/{pm8916_gpio.c => qcom_pmic_gpio.c} (67%)
 rename drivers/power/pmic/{pm8916.c => pmic_qcom.c} (52%)

Comments

Tom Rini Aug. 26, 2022, 6:50 p.m. UTC | #1
On Thu, Aug 04, 2022 at 07:57:17PM +0530, Sumit Garg wrote:

> Since both pm8916.c and pm8916_gpio.c are already supporting multiple
> Qcom SoCs, it makes sense to rename these drivers to pmic_qcom.c and
> qcom_pmic_gpio.c respectively. Also, these driver can be extended to
> support additional functionality if required for other Qcom SoCs.
> 
> Along with this import latest DT binding: qcom,spmi-pmic.txt from Linux
> kernel and thereby remove pm8916.txt.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Applied to u-boot/next, thanks!
diff mbox series

Patch

diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
index 2bf759d843..fa6476ed1a 100644
--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
@@ -43,7 +43,7 @@  CONFIG_FASTBOOT_BUF_ADDR=0x91000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_MSM_GPIO=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MMC_SDHCI=y
@@ -52,7 +52,7 @@  CONFIG_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
 CONFIG_DM_PMIC=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_MSM_SERIAL=y
 CONFIG_SPMI_MSM=y
 CONFIG_USB=y
diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig
index 2ede13fed1..6b4483bf69 100644
--- a/configs/dragonboard820c_defconfig
+++ b/configs/dragonboard820c_defconfig
@@ -36,12 +36,12 @@  CONFIG_ENV_EXT4_INTERFACE="mmc"
 CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CLK=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
 CONFIG_DM_PMIC=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_MSM_SERIAL=y
 CONFIG_SPMI_MSM=y
diff --git a/configs/dragonboard845c_defconfig b/configs/dragonboard845c_defconfig
index cf1a1d25cf..a69d82761a 100644
--- a/configs/dragonboard845c_defconfig
+++ b/configs/dragonboard845c_defconfig
@@ -20,10 +20,10 @@  CONFIG_CMD_GPIO=y
 # CONFIG_NET is not set
 CONFIG_CLK=y
 CONFIG_MSM_GPIO=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_PINCTRL=y
 CONFIG_DM_PMIC=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_MSM_GENI_SERIAL=y
 CONFIG_SPMI_MSM=y
 CONFIG_LMB_MAX_REGIONS=64
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index 6553568e76..537495d159 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -127,7 +127,7 @@  CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_GPIO_HOG=y
 CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_I2C_CROS_EC_LDO=y
@@ -179,7 +179,7 @@  CONFIG_DM_PMIC=y
 CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 572cf8edd8..72a7b5bb76 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -169,7 +169,7 @@  CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_GPIO_HOG=y
 CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_DM_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_SANDBOX=y
@@ -230,7 +230,7 @@  CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
 CONFIG_DM_PMIC_MC34708=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index a71ce77c40..a8aeedc75c 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -99,7 +99,7 @@  CONFIG_DM_DEMO_SHAPE=y
 CONFIG_DFU_SF=y
 CONFIG_GPIO_HOG=y
 CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_I2C_CROS_EC_LDO=y
@@ -153,7 +153,7 @@  CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
 CONFIG_DM_PMIC_MC34708=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
 CONFIG_PMIC_S5M8767=y
diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index 9ee70c29c1..aa8868acba 100644
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -126,7 +126,7 @@  CONFIG_DM_DEMO_SIMPLE=y
 CONFIG_DM_DEMO_SHAPE=y
 CONFIG_SPL_FIRMWARE=y
 CONFIG_GPIO_HOG=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_I2C_CROS_EC_LDO=y
@@ -177,7 +177,7 @@  CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
 CONFIG_DM_PMIC_MC34708=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index ec2d26d443..da55d609de 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -127,7 +127,7 @@  CONFIG_DM_DEMO_SIMPLE=y
 CONFIG_DM_DEMO_SHAPE=y
 CONFIG_SPL_FIRMWARE=y
 CONFIG_GPIO_HOG=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_I2C_CROS_EC_LDO=y
@@ -180,7 +180,7 @@  CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
 CONFIG_DM_PMIC_MC34708=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
index 0d946b4ad7..aa701c8111 100644
--- a/configs/sandbox_vpl_defconfig
+++ b/configs/sandbox_vpl_defconfig
@@ -136,7 +136,7 @@  CONFIG_DM_DEMO_SIMPLE=y
 CONFIG_DM_DEMO_SHAPE=y
 CONFIG_SPL_FIRMWARE=y
 CONFIG_GPIO_HOG=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_I2C_CROS_EC_LDO=y
@@ -185,7 +185,7 @@  CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
 CONFIG_DM_PMIC_MC34708=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/starqltechn_defconfig b/configs/starqltechn_defconfig
index 2d07767b61..4f84f5f974 100644
--- a/configs/starqltechn_defconfig
+++ b/configs/starqltechn_defconfig
@@ -23,10 +23,10 @@  CONFIG_CMD_BMP=y
 # CONFIG_DM_STDIO is not set
 CONFIG_CLK=y
 CONFIG_MSM_GPIO=y
-CONFIG_PM8916_GPIO=y
+CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_PINCTRL=y
 CONFIG_DM_PMIC=y
-CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_QCOM=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_SPMI_MSM=y
 CONFIG_DM_VIDEO=y
diff --git a/doc/device-tree-bindings/pmic/pm8916.txt b/doc/device-tree-bindings/pmic/pm8916.txt
deleted file mode 100644
index 15c598b8c4..0000000000
--- a/doc/device-tree-bindings/pmic/pm8916.txt
+++ /dev/null
@@ -1,18 +0,0 @@ 
-Qualcomm pm8916 PMIC
-
-This PMIC is connected using SPMI bus so should be child of SPMI bus controller.
-
-Required properties:
-- compatible: "qcom,spmi-pmic";
-- reg: SPMI Slave ID, size (ignored)
-- #address-cells: 0x1 (peripheral ID)
-- #size-cells: 0x1 (size of peripheral register space)
-
-Example:
-
-pm8916@0 {
-	compatible = "qcom,spmi-pmic";
-	reg = <0x0 0x1>;
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-};
diff --git a/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt b/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
new file mode 100644
index 0000000000..eb78e3ae77
--- /dev/null
+++ b/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
@@ -0,0 +1,94 @@ 
+          Qualcomm SPMI PMICs multi-function device bindings
+
+The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
+PMICs.  These PMICs use a QPNP scheme through SPMI interface.
+QPNP is effectively a partitioning scheme for dividing the SPMI extended
+register space up into logical pieces, and set of fixed register
+locations/definitions within these regions, with some of these regions
+specifically used for interrupt handling.
+
+The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
+interfaced to the chip via the SPMI (System Power Management Interface) bus.
+Support for multiple independent functions are implemented by splitting the
+16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
+each. A function can consume one or more of these fixed-size register regions.
+
+Required properties:
+- compatible:      Should contain one of:
+                   "qcom,pm660",
+                   "qcom,pm660l",
+                   "qcom,pm7325",
+                   "qcom,pm8004",
+                   "qcom,pm8005",
+                   "qcom,pm8019",
+                   "qcom,pm8028",
+                   "qcom,pm8110",
+                   "qcom,pm8150",
+                   "qcom,pm8150b",
+                   "qcom,pm8150c",
+                   "qcom,pm8150l",
+                   "qcom,pm8226",
+                   "qcom,pm8350c",
+                   "qcom,pm8841",
+                   "qcom,pm8901",
+                   "qcom,pm8909",
+                   "qcom,pm8916",
+                   "qcom,pm8941",
+                   "qcom,pm8950",
+                   "qcom,pm8953",
+                   "qcom,pm8994",
+                   "qcom,pm8998",
+                   "qcom,pma8084",
+                   "qcom,pmd9635",
+                   "qcom,pmi8950",
+                   "qcom,pmi8962",
+                   "qcom,pmi8994",
+                   "qcom,pmi8998",
+                   "qcom,pmk8002",
+                   "qcom,pmk8350",
+                   "qcom,pmr735a",
+                   "qcom,smb2351",
+                   or generalized "qcom,spmi-pmic".
+- reg:             Specifies the SPMI USID slave address for this device.
+                   For more information see:
+                   Documentation/devicetree/bindings/spmi/spmi.yaml
+
+Required properties for peripheral child nodes:
+- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
+
+Optional properties for peripheral child nodes:
+- interrupts:      Interrupts are specified as a 4-tuple. For more information
+                   see:
+                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
+- interrupt-names: Corresponding interrupt name to the interrupts property
+
+Each child node of SPMI slave id represents a function of the PMIC. In the
+example below the rtc device node represents a peripheral of pm8941
+SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
+
+Example:
+
+	spmi {
+		compatible = "qcom,spmi-pmic-arb";
+
+		pm8941@0 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x0 SPMI_USID>;
+
+			rtc {
+				compatible = "qcom,rtc";
+				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "alarm";
+			};
+		};
+
+		pm8941@1 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x1 SPMI_USID>;
+
+			regulator {
+				compatible = "qcom,regulator";
+				regulator-name = "8941_boost";
+			};
+		};
+	};
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index aaa152fae7..39dfdac195 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -303,14 +303,14 @@  config CMD_PCA953X
 	  legacy GPIO interface. Several subcommands are provided which mirror
 	  the standard 'gpio' command. It should use that instead.
 
-config PM8916_GPIO
-	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
-	depends on DM_GPIO && PMIC_PM8916
+config QCOM_PMIC_GPIO
+	bool "Qualcomm generic PMIC GPIO/keypad driver"
+	depends on DM_GPIO && PMIC_QCOM
 	help
 	  Support for GPIO pins and power/reset buttons found on
-	  Qualcomm PM8916 PMIC.
+	  Qualcomm SoCs PMIC.
 	  Default name for GPIO bank is "pm8916".
-	  Power and reset buttons are placed in "pm8916_key" bank and
+	  Power and reset buttons are placed in "pwkey_qcom" bank and
           have gpio numbers 0 and 1 respectively.
 
 config PCF8575_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d7552762d0..ff6dcc332f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -64,7 +64,7 @@  obj-$(CONFIG_OCTEON_GPIO)	+= octeon_gpio.o
 obj-$(CONFIG_MVEBU_GPIO)	+= mvebu_gpio.o
 obj-$(CONFIG_MSM_GPIO)		+= msm_gpio.o
 obj-$(CONFIG_$(SPL_)PCF8575_GPIO)	+= pcf8575_gpio.o
-obj-$(CONFIG_$(SPL_TPL_)PM8916_GPIO)	+= pm8916_gpio.o
+obj-$(CONFIG_$(SPL_TPL_)QCOM_PMIC_GPIO)	+= qcom_pmic_gpio.o
 obj-$(CONFIG_MT7620_GPIO)	+= mt7620_gpio.o
 obj-$(CONFIG_MT7621_GPIO)	+= mt7621_gpio.o
 obj-$(CONFIG_MSCC_SGPIO)	+= mscc_sgpio.o
diff --git a/drivers/gpio/pm8916_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
similarity index 67%
rename from drivers/gpio/pm8916_gpio.c
rename to drivers/gpio/qcom_pmic_gpio.c
index 7ad95784a8..e9232a007f 100644
--- a/drivers/gpio/pm8916_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
+ * Qualcomm generic pmic gpio driver
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
  */
@@ -19,7 +19,7 @@ 
 
 /* Register maps */
 
-/* Type and subtype are shared for all pm8916 peripherals */
+/* Type and subtype are shared for all PMIC peripherals */
 #define REG_TYPE               0x4
 #define REG_SUBTYPE            0x5
 
@@ -47,14 +47,14 @@ 
 #define REG_EN_CTL             0x46
 #define REG_EN_CTL_ENABLE      (1 << 7)
 
-struct pm8916_gpio_bank {
+struct qcom_gpio_bank {
 	uint32_t pid; /* Peripheral ID on SPMI bus */
 };
 
-static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
-				     bool input, int value)
+static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset,
+				   bool input, int value)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int ret;
 
@@ -101,20 +101,20 @@  static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
 			       REG_EN_CTL_ENABLE);
 }
 
-static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
+static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
-	return pm8916_gpio_set_direction(dev, offset, true, 0);
+	return qcom_gpio_set_direction(dev, offset, true, 0);
 }
 
-static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
-					int value)
+static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
+				      int value)
 {
-	return pm8916_gpio_set_direction(dev, offset, false, value);
+	return qcom_gpio_set_direction(dev, offset, false, value);
 }
 
-static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
+static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;
 
@@ -134,9 +134,9 @@  static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
 	}
 }
 
-static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
+static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;
 
@@ -147,10 +147,10 @@  static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
 	return !!(reg & REG_STATUS_VAL_MASK);
 }
 
-static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
-				 int value)
+static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
+			       int value)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 
 	/* Set the output value of the gpio */
@@ -158,17 +158,17 @@  static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
 			       REG_CTL_OUTPUT_MASK, !!value);
 }
 
-static const struct dm_gpio_ops pm8916_gpio_ops = {
-	.direction_input	= pm8916_gpio_direction_input,
-	.direction_output	= pm8916_gpio_direction_output,
-	.get_value		= pm8916_gpio_get_value,
-	.set_value		= pm8916_gpio_set_value,
-	.get_function		= pm8916_gpio_get_function,
+static const struct dm_gpio_ops qcom_gpio_ops = {
+	.direction_input	= qcom_gpio_direction_input,
+	.direction_output	= qcom_gpio_direction_output,
+	.get_value		= qcom_gpio_get_value,
+	.set_value		= qcom_gpio_set_value,
+	.get_function		= qcom_gpio_get_function,
 };
 
-static int pm8916_gpio_probe(struct udevice *dev)
+static int qcom_gpio_probe(struct udevice *dev)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	int reg;
 
 	priv->pid = dev_read_addr(dev);
@@ -187,33 +187,33 @@  static int pm8916_gpio_probe(struct udevice *dev)
 	return 0;
 }
 
-static int pm8916_gpio_of_to_plat(struct udevice *dev)
+static int qcom_gpio_of_to_plat(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 
 	uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
-		uc_priv->bank_name = "pm8916";
+		uc_priv->bank_name = "qcom_pmic";
 
 	return 0;
 }
 
-static const struct udevice_id pm8916_gpio_ids[] = {
+static const struct udevice_id qcom_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
 	{ .compatible = "qcom,pm8998-gpio" },
 	{ }
 };
 
-U_BOOT_DRIVER(gpio_pm8916) = {
-	.name	= "gpio_pm8916",
+U_BOOT_DRIVER(qcom_pmic_gpio) = {
+	.name	= "qcom_pmic_gpio",
 	.id	= UCLASS_GPIO,
-	.of_match = pm8916_gpio_ids,
-	.of_to_plat = pm8916_gpio_of_to_plat,
-	.probe	= pm8916_gpio_probe,
-	.ops	= &pm8916_gpio_ops,
-	.priv_auto	= sizeof(struct pm8916_gpio_bank),
+	.of_match = qcom_gpio_ids,
+	.of_to_plat = qcom_gpio_of_to_plat,
+	.probe	= qcom_gpio_probe,
+	.ops	= &qcom_gpio_ops,
+	.priv_auto	= sizeof(struct qcom_gpio_bank),
 };
 
 
@@ -222,14 +222,14 @@  U_BOOT_DRIVER(gpio_pm8916) = {
 #define KPDPWR_ON_INT_BIT                     0
 #define RESIN_ON_INT_BIT                      1
 
-static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
+static int qcom_pwrkey_get_function(struct udevice *dev, unsigned offset)
 {
 	return GPIOF_INPUT;
 }
 
-static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
+static int qcom_pwrkey_get_value(struct udevice *dev, unsigned offset)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 
 	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);
 
@@ -247,14 +247,14 @@  static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
 	}
 }
 
-static const struct dm_gpio_ops pm8941_pwrkey_ops = {
-	.get_value		= pm8941_pwrkey_get_value,
-	.get_function		= pm8941_pwrkey_get_function,
+static const struct dm_gpio_ops qcom_pwrkey_ops = {
+	.get_value		= qcom_pwrkey_get_value,
+	.get_function		= qcom_pwrkey_get_function,
 };
 
-static int pm8941_pwrkey_probe(struct udevice *dev)
+static int qcom_pwrkey_probe(struct udevice *dev)
 {
-	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
+	struct qcom_gpio_bank *priv = dev_get_priv(dev);
 	int reg;
 
 	priv->pid = dev_read_addr(dev);
@@ -273,31 +273,31 @@  static int pm8941_pwrkey_probe(struct udevice *dev)
 	return 0;
 }
 
-static int pm8941_pwrkey_of_to_plat(struct udevice *dev)
+static int qcom_pwrkey_of_to_plat(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 
 	uc_priv->gpio_count = 2;
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
-		uc_priv->bank_name = "pm8916_key";
+		uc_priv->bank_name = "pwkey_qcom";
 
 	return 0;
 }
 
-static const struct udevice_id pm8941_pwrkey_ids[] = {
+static const struct udevice_id qcom_pwrkey_ids[] = {
 	{ .compatible = "qcom,pm8916-pwrkey" },
 	{ .compatible = "qcom,pm8994-pwrkey" },
 	{ .compatible = "qcom,pm8998-pwrkey" },
 	{ }
 };
 
-U_BOOT_DRIVER(pwrkey_pm89xx) = {
-	.name	= "pwrkey_pm89xx",
+U_BOOT_DRIVER(pwrkey_qcom) = {
+	.name	= "pwrkey_qcom",
 	.id	= UCLASS_GPIO,
-	.of_match = pm8941_pwrkey_ids,
-	.of_to_plat = pm8941_pwrkey_of_to_plat,
-	.probe	= pm8941_pwrkey_probe,
-	.ops	= &pm8941_pwrkey_ops,
-	.priv_auto	= sizeof(struct pm8916_gpio_bank),
+	.of_match = qcom_pwrkey_ids,
+	.of_to_plat = qcom_pwrkey_of_to_plat,
+	.probe	= qcom_pwrkey_probe,
+	.ops	= &qcom_pwrkey_ops,
+	.priv_auto	= sizeof(struct qcom_gpio_bank),
 };
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 66b16b06e0..0478f2aa1d 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -216,10 +216,10 @@  config PMIC_MAX8997
 	- MUIC
 	- Others
 
-config PMIC_PM8916
-	bool "Enable Driver Model for Qualcomm PM8916 PMIC"
+config PMIC_QCOM
+	bool "Enable Driver Model for Qualcomm generic PMIC"
 	---help---
-	The PM8916 is a PMIC connected to one (or several) processors
+	The Qcom PMIC is connected to one (or several) processors
 	with SPMI bus. It has 2 slaves with several peripherals:
 	- 18x LDO
 	- 4x GPIO
@@ -229,7 +229,7 @@  config PMIC_PM8916
 	- Vibrator drivers
 	- Others
 
-	Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt
+	Driver binding info: doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
 
 config PMIC_RK8XX
 	bool "Enable support for Rockchip PMIC RK8XX"
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f73b326255..e1d3545490 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -20,7 +20,7 @@  obj-$(CONFIG_PMIC_ACT8846) += act8846.o
 obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o
 obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
 obj-$(CONFIG_PMIC_MAX8997) += max8997.o
-obj-$(CONFIG_PMIC_PM8916) += pm8916.o
+obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
 obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
 obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
 obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
diff --git a/drivers/power/pmic/pm8916.c b/drivers/power/pmic/pmic_qcom.c
similarity index 52%
rename from drivers/power/pmic/pm8916.c
rename to drivers/power/pmic/pmic_qcom.c
index 5f4386d4ad..ad8daf43f0 100644
--- a/drivers/power/pmic/pm8916.c
+++ b/drivers/power/pmic/pmic_qcom.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Qualcomm pm8916 pmic driver
+ * Qualcomm generic pmic driver
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
  */
@@ -13,19 +13,19 @@ 
 #define PID_MASK (0xFF << PID_SHIFT)
 #define REG_MASK 0xFF
 
-struct pm8916_priv {
+struct pmic_qcom_priv {
 	uint32_t usid; /* Slave ID on SPMI bus */
 };
 
-static int pm8916_reg_count(struct udevice *dev)
+static int pmic_qcom_reg_count(struct udevice *dev)
 {
 	return 0xFFFF;
 }
 
-static int pm8916_write(struct udevice *dev, uint reg, const uint8_t *buff,
-			int len)
+static int pmic_qcom_write(struct udevice *dev, uint reg, const uint8_t *buff,
+			   int len)
 {
-	struct pm8916_priv *priv = dev_get_priv(dev);
+	struct pmic_qcom_priv *priv = dev_get_priv(dev);
 
 	if (len != 1)
 		return -EINVAL;
@@ -35,9 +35,9 @@  static int pm8916_write(struct udevice *dev, uint reg, const uint8_t *buff,
 			      *buff);
 }
 
-static int pm8916_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+static int pmic_qcom_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
-	struct pm8916_priv *priv = dev_get_priv(dev);
+	struct pmic_qcom_priv *priv = dev_get_priv(dev);
 	int val;
 
 	if (len != 1)
@@ -52,20 +52,20 @@  static int pm8916_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 	return 0;
 }
 
-static struct dm_pmic_ops pm8916_ops = {
-	.reg_count = pm8916_reg_count,
-	.read = pm8916_read,
-	.write = pm8916_write,
+static struct dm_pmic_ops pmic_qcom_ops = {
+	.reg_count = pmic_qcom_reg_count,
+	.read = pmic_qcom_read,
+	.write = pmic_qcom_write,
 };
 
-static const struct udevice_id pm8916_ids[] = {
+static const struct udevice_id pmic_qcom_ids[] = {
 	{ .compatible = "qcom,spmi-pmic" },
 	{ }
 };
 
-static int pm8916_probe(struct udevice *dev)
+static int pmic_qcom_probe(struct udevice *dev)
 {
-	struct pm8916_priv *priv = dev_get_priv(dev);
+	struct pmic_qcom_priv *priv = dev_get_priv(dev);
 
 	priv->usid = dev_read_addr(dev);
 
@@ -75,12 +75,12 @@  static int pm8916_probe(struct udevice *dev)
 	return 0;
 }
 
-U_BOOT_DRIVER(pmic_pm8916) = {
-	.name = "pmic_pm8916",
+U_BOOT_DRIVER(pmic_qcom) = {
+	.name = "pmic_qcom",
 	.id = UCLASS_PMIC,
-	.of_match = pm8916_ids,
+	.of_match = pmic_qcom_ids,
 	.bind = dm_scan_fdt_dev,
-	.probe = pm8916_probe,
-	.ops = &pm8916_ops,
-	.priv_auto	= sizeof(struct pm8916_priv),
+	.probe = pmic_qcom_probe,
+	.ops = &pmic_qcom_ops,
+	.priv_auto	= sizeof(struct pmic_qcom_priv),
 };